stm8_interrupt_vector.c

STM8S105 BLDC源代码

/* BASIC INTERRUPT VECTORS TABLE FOR STM8 devices
 * Copyright (c) 2008 STMicroelectronics
 */

#include "stm8s_it.h"

extern void @near _stext(); /* startup routine */

void @near (* const _vectab[])() =
{
  
  (void @near (*)())0x8200,
  _stext, /* RESET */
  
  (void @near (*)())0x8200,
  TRAP_IRQHandler, /* TRAP - Software interrupt */
  
  (void @near (*)())0x8200,
  TLI_IRQHandler, /* irq0 - External Top Level interrupt (TLI) */
  
  (void @near (*)())0x8200,
  AWU_IRQHandler, /* irq1 - Auto Wake Up from Halt interrupt */

  (void @near (*)())0x8200,
  CLK_IRQHandler, /* irq2 - Clock Controller interrupt */

  (void @near (*)())0x8200,
  EXTI_PORTA_IRQHandler, /* irq3 - External interrupt 0 (GPIOA) */

  (void @near (*)())0x8200,
  EXTI_PORTB_IRQHandler, /* irq4 - External interrupt 1 (GPIOB) */

  (void @near (*)())0x8200,
  EXTI_PORTC_IRQHandler, /* irq5 - External interrupt 2 (GPIOC) */

  (void @near (*)())0x8200,
  EXTI_PORTD_IRQHandler, /* irq6 - External interrupt 3 (GPIOD) */

  (void @near (*)())0x8200,
  EXTI_PORTE_IRQHandler, /* irq7 - External interrupt 4 (GPIOE) */

  (void @near (*)())0x8200,
  CAN_RX_IRQHandler, /* irq8 - CAN Rx interrupt */

  (void @near (*)())0x8200,
  CAN_TX_IRQHandler, /* irq9 - CAN Tx/ER/SC interrupt */

  (void @near (*)())0x8200,
  SPI_IRQHandler, /* irq10 - SPI End of transfer interrupt */

  (void @near (*)())0x8200,
  TIM1_UPD_OVF_TRG_BRK_IRQHandler, /* irq11 - TIM1 Update/Overflow/Trigger/Break interrupt */

  (void @near (*)())0x8200,
  TIM1_CAP_COM_IRQHandler, /* irq12 - TIM1 Capture/Compare interrupt */

  (void @near (*)())0x8200,
  TIM2_UPD_OVF_BRK_IRQHandler, /* irq13 - TIM2 Update/Overflow/Break interrupt  */

  (void @near (*)())0x8200,
  TIM2_CAP_COM_IRQHandler, /* irq14 - TIM2 Capture/Compare interrupt */

  (void @near (*)())0x8200,
  TIM3_UPD_OVF_BRK_IRQHandler, /* irq15 - TIM3 Update/Overflow/Break interrupt */

  (void @near (*)())0x8200,
  TIM3_CAP_COM_IRQHandler, /* irq16 - TIM3 Capture/Compare interrupt */

  (void @near (*)())0x8200,
  UART1_TX_IRQHandler, /* irq17 - UART1 Tx complete interrupt */

  (void @near (*)())0x8200,
  UART1_RX_IRQHandler, /* irq18 - UART1 Rx interrupt */

  (void @near (*)())0x8200,
  I2C_IRQHandler, /* irq19 - I2C interrupt */

  (void @near (*)())0x8200,
  UART3_TX_IRQHandler, /* irq20 - UART2/UART3 Tx interrupt */

  (void @near (*)())0x8200,
  UART3_RX_IRQHandler, /* irq21 - UART2/UART3 Rx interrupt */

  (void @near (*)())0x8200,
  ADC2_IRQHandler, /* irq22 - ADC1/ADC2 end of conversion interrupt */

  (void @near (*)())0x8200,
  TIM4_UPD_OVF_IRQHandler, /* irq23 - TIM4 Update/Overflow interrupt */

  (void @near (*)())0x8200,
  EEPROM_EEC_IRQHandler, /* irq24 - FLASH interrupt */

  (void @near (*)())0x8200,
  NonHandledInterrupt, /* irq25 - Reserved */

  (void @near (*)())0x8200,
  NonHandledInterrupt, /* irq26 - Reserved */

  (void @near (*)())0x8200,
  NonHandledInterrupt, /* irq27 - Reserved */

  (void @near (*)())0x8200,
  NonHandledInterrupt, /* irq28 - Reserved */

  (void @near (*)())0x8200,
  NonHandledInterrupt, /* irq29 - Reserved */

};

/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/