stm8_stvd_cosmic_bldc.map

STM8S105 BLDC源代码

_TIM2_GenerateEvent               >    2   (2)
_TIM2_GetCapture1                 >    6   (6)
_TIM2_GetCapture2                 >    6   (6)
_TIM2_GetCapture3                 >    6   (6)
_TIM2_GetCounter                  >    4   (4)
_TIM2_GetFlagStatus               >    5   (5)
_TIM2_GetITStatus                 >    5   (5)
_TIM2_GetPrescaler                >    2   (2)
_TIM2_ICInit                      >   13   (7)
_TIM2_ITConfig                    >    4   (4)
_TIM2_OC1Init                     >    8   (8)
_TIM2_OC1PolarityConfig           >    2   (2)
_TIM2_OC1PreloadConfig            >    2   (2)
_TIM2_OC2Init                     >    8   (8)
_TIM2_OC2PolarityConfig           >    2   (2)
_TIM2_OC2PreloadConfig            >    2   (2)
_TIM2_OC3Init                     >    8   (8)
_TIM2_OC3PolarityConfig           >    2   (2)
_TIM2_OC3PreloadConfig            >    2   (2)
_TIM2_PWMIConfig                  >   15   (9)
_TIM2_PrescalerConfig             >    2   (2)
_TIM2_SelectOCxM                  >    4   (4)
_TIM2_SelectOnePulseMode          >    2   (2)
_TIM2_SetAutoreload               >    2   (2)
_TIM2_SetCompare1                 >    2   (2)
_TIM2_SetCompare2                 >    2   (2)
_TIM2_SetCompare3                 >    2   (2)
_TIM2_SetCounter                  >    2   (2)
_TIM2_SetIC1Prescaler                  3   (3)
_TIM2_SetIC2Prescaler                  3   (3)
_TIM2_SetIC3Prescaler                  3   (3)
_TIM2_TimeBaseInit                >    5   (5)
_TIM2_UpdateDisableConfig         >    2   (2)
_TIM2_UpdateRequestConfig         >    2   (2)

STVD_COSMIC_Debug\stm8s_tim4.o:
_TIM4_ARRPreloadConfig            >    2   (2)
_TIM4_ClearFlag                   >    2   (2)
_TIM4_ClearITPendingBit                2   (2)
_TIM4_Cmd                              2   (2)
_TIM4_DeInit                           2   (2)
_TIM4_GenerateEvent               >    2   (2)
_TIM4_GetCounter                  >    2   (2)
_TIM4_GetFlagStatus               >    2   (2)
_TIM4_GetITStatus                 >    3   (3)
_TIM4_GetPrescaler                >    2   (2)
_TIM4_ITConfig                         4   (4)
_TIM4_PrescalerConfig             >    2   (2)
_TIM4_SelectOnePulseMode          >    2   (2)
_TIM4_SetAutoreload               >    2   (2)
_TIM4_SetCounter                  >    2   (2)
_TIM4_TimeBaseInit                     2   (2)
_TIM4_UpdateDisableConfig         >    2   (2)
_TIM4_UpdateRequestConfig         >    2   (2)

STVD_COSMIC_Debug\vdev.o:
_vdev_exec                        >    3   (3)
_vdev_get                              2   (2)
_vdev_init                             3   (3)

STVD_COSMIC_Debug\vdev_callbacks.o:
_fncallback_divby0                     5   (5)

STVD_COSMIC_Debug\vdev_ios.o:
_vdev_fninp16                          9   (9)
_vdev_fninp32                          9   (9)
_vdev_fninp8                          14   (9)
_vdev_fnout16                          9   (9)
_vdev_fnout32                         11   (11)
_vdev_fnout8                          10   (8)

Stack size: 90


                              ---------
                              Call tree
                              ---------
   1 > _ADC1_IRQHandler: (5)

   2 > _ADC2_IRQHandler: (17)
   3      + _SetSamplingPoint_Current: (2)
       
   4 > _AWU_IRQHandler: (5)

   5 > _Application_ADC_Manager: (2)
   6      + _GetAsyncUserAdc: (4)
   7      |    + _BLDC_Get_Target_rotor_speed: (2)
   8      |    + _BLDC_Set_Target_rotor_speed: (2)
          | 
   9      + _GetBusVoltage: (2)
  10      |    + _BLDC_Set_Bus_Voltage: (2)
          | 
  11      + _GetCurrent: (4)
  12      |    + _BLDC_Set_Current_measured: (2)
          | 
  13      + _GetNeutralPoint: (4)
  14      + _GetSyncUserAdc: (4)
  15      + _GetTemperature: (5)
  16      |    + _BLDC_Set_Heatsink_Temperature: (2)
          | 
  17      + _vtimer_SetTimer: (7)
       
  18 > _BLDC_Drive: (6)
  19      + _BLDCDelayCoefComputation: (6)
  20      + _GetSpeed_01HZ: (14)
  21      + (_fncallback_divby0) ...
  22      + (_vdev_fninp16) ...
  23      + (_vdev_fninp32) ...
  24      + (_vdev_fninp8) ...
  25      + (_vdev_fnout16) ...
  26      + (_vdev_fnout32) ...
  27      + (_vdev_fnout8) ...
  28      + _vtimer_SetTimer --> 17
       
  29 > _BLDC_Get_AutoDelay: (2)

  30 > _BLDC_Get_Bus_Voltage: (2)

  31 > _BLDC_Get_Current_measured: (2)

  32 > _BLDC_Get_Current_reference: (2)

  33 > _BLDC_Get_Demag_Time: (2)

  34 > _BLDC_Get_Duty_cycle: (2)

  35 > _BLDC_Get_Duty_cycle_cnt: (2)

  36 > _BLDC_Get_Falling_Delay: (2)

  37 > _BLDC_Get_FastDemag: (2)

  38 > _BLDC_Get_Heatsink_Temperature: (2)

  39 > _BLDC_Get_Measured_rotor_speed: (2)

  40 > _BLDC_Get_MinimumOffTime: (2)

  41 > _BLDC_Get_Rising_Delay: (2)

  42 > _BLDC_Get_Speed_KD: (2)

  43 > _BLDC_Get_Speed_KI: (2)

  44 > _BLDC_Get_Speed_KP: (2)

  45 > _BLDC_Get_ToggleMode: (2)

  46 > _BLDC_Set_AutoDelay: (2)

  47 > _BLDC_Set_Current_reference: (2)

  48 > _BLDC_Set_Demag_Time: (2)

  49 > _BLDC_Set_Duty_cycle: (2)

  50 > _BLDC_Set_Duty_cycle_cnt: (2)

  51 > _BLDC_Set_Falling_Delay: (2)

  52 > _BLDC_Set_FastDemag: (2)

  53 > _BLDC_Set_MinimumOffTime: (2)

  54 > _BLDC_Set_Rising_Delay: (2)

  55 > _BLDC_Set_Speed_KD: (2)

  56 > _BLDC_Set_Speed_KI: (2)

  57 > _BLDC_Set_Speed_KP: (2)

  58 > _BLDC_Set_ToggleMode: (2)

  59 > _BrakeMotor: (4)
  60      + _LS_GPIO_BRAKE: (2)
       
  61 > _CAN_RX_IRQHandler: (5)

  62 > _CAN_TX_IRQHandler: (5)

  63 > _CLK_AdjustHSICalibrationValue: (3)

  64 > _CLK_CANConfig: (3)

  65 > _CLK_CCOCmd: (2)

  66 > _CLK_CCOConfig: (3)

  67 > _CLK_ClearITPendingBit: (2)

  68 > _CLK_ClockSecuritySystemEnable: (2)

  69 > _CLK_ClockSwitchCmd: (2)

  70 > _CLK_ClockSwitchConfig: (10)

  71 > _CLK_FastHaltWakeUpCmd: (2)

  72 > _CLK_GetClockFreq: (11)

  73 > _CLK_GetFlagStatus: (7)

  74 > _CLK_GetITStatus: (4)

  75 > _CLK_GetSYSCLKSource: (2)

  76 > _CLK_HSECmd: (2)

  77 > _CLK_HSICmd: (2)

  78 > _CLK_HSIPrescalerConfig: (3)

  79 > _CLK_IRQHandler: (5)

  80 > _CLK_ITConfig: (4)

  81 > _CLK_LSICmd: (2)

  82 > _CLK_PeripheralClockConfig: (4)

  83 > _CLK_SWIMConfig: (2)

  84 > _CLK_SYSCLKEmergencyClear: (2)

  85 > _CLK_SlowActiveHaltWakeUpCmd: (2)

  86 > _DebugPinsOff: (2)

  87 > _EEPROM_EEC_IRQHandler: (5)

  88 > _EXTI_PORTA_IRQHandler: (5)

  89 > _EXTI_PORTB_IRQHandler: (5)

  90 > _EXTI_PORTC_IRQHandler: (5)

  91 > _EXTI_PORTD_IRQHandler: (5)

  92 > _EXTI_PORTE_IRQHandler: (5)

  93 > _FLASH_DeInit: (3)

  94 > _FLASH_EraseBlock: (9)

  95 > _FLASH_EraseByte: (6)

  96 > _FLASH_EraseOptionByte: (6)
  97      + _FLASH_WaitForLastOperation: (7)
       
  98 > _FLASH_GetBootSize: (6)

  99 > _FLASH_GetFlagStatus: (3)

 100 > _FLASH_GetLowPowerMode: (2)

 101 > _FLASH_GetProgrammingTime: (2)

 102 > _FLASH_ITConfig: (2)

 103 > _FLASH_ProgramBlock: (14)

 104 > _FLASH_ProgramByte: (7)

 105 > _FLASH_ProgramWord: (10)

 106 > _FLASH_ReadByte: (6)

 107 > _FLASH_SetLowPowerMode: (3)

 108 > _GPIO_DeInit: (2)

 109 > _GPIO_ExternalPullUpConfig: (6)

 110 > _GPIO_ReadInputData: (2)

 111 > _GPIO_ReadOutputData: (2)

 112 > _GPIO_Write: (5)

 113 > _GPIO_WriteHigh: (5)

 114 > _GPIO_WriteLow: (5)

 115 > _GPIO_WriteReverse: (5)

 116 > _Get_BLDC_Const: (2)

 117 > _Get_BLDC_Var: (2)

 118 > _Hall_Timeout: (2)

 119 > _I2C_IRQHandler: (5)

 120 > _NonHandledInterrupt: (5)

 121 > _PID_Regulator: (44)

 122 > _PI_Regulator: (32)

 123 > _SPI_IRQHandler: (5)

 124 > _SetSamplingPoint_BEMF: (2)

 125 > _SetSamplingPoint_User_Sync: (2)

 126 > _Set_Current: (8)
 127      + _DelayCoefAdjust: (2)
       
 128 > _TIM1_CAP_COM_IRQHandler: (5)

 129 > _TIM1_UPD_OVF_TRG_BRK_IRQHandler: (15)
 130      + _ComHandler: (4)
 131      |    + _ComHandler --> 130
 132      |    + _Commutate_Motor: (2)
 133      |    + _Enable_ADC_BEMF_Sampling: (2)
 134      |    + _Enable_ADC_Current_Sampling: (2)
          | 
       
 135 > _TIM2_ARRPreloadConfig: (2)

 136 > _TIM2_CAP_COM_IRQHandler: (16)
 137      + _ComHandler --> 130
 138      + _GetStepTime: (4)
 139      + _SpeedMeasurement: (2)
 140      + _TIM2_ClearITPendingBit: (2)
 141      + _vtimer_SetTimer --> 17
       
 142 > _TIM2_CCxCmd: (4)

 143 > _TIM2_ClearFlag: (4)

 144 > _TIM2_Cmd: (2)

 145 > _TIM2_DeInit: (2)

 146 > _TIM2_ForcedOC1Config: (3)

 147 > _TIM2_ForcedOC2Config: (3)

 148 > _TIM2_ForcedOC3Config: (3)

 149 > _TIM2_GenerateEvent: (2)