dvdevcod.h

vc6.0完整版

// which are not disabled.  For example, if no buttons are currently present,
// IDVDAnnexJ::ButtonActivate() won't work, even though the buttons are not
// explicitly disabled. 


#define EC_DVD_STILL_ON                         (EC_DVDBASE + 0x09)
// Parameters: ( BOOL, DWORD ) 
// lParam1 == 0  -->  buttons are available, so StillOff won't work
// lParam1 == 1  -->  no buttons available, so StillOff will work
// lParam2 indicates the number of seconds the still will last, with 0xffffffff 
//   indicating an infinite still (wait till button or StillOff selected).
//
// Raised from following domains: all
//
// Signaled at the beginning of any still: PGC still, Cell Still, or VOBU Still.
// Note that all combinations of buttons and still are possible (buttons on with
// still on, buttons on with still off, button off with still on, button off
// with still off).

#define EC_DVD_STILL_OFF                         (EC_DVDBASE + 0x0a)
// Parameters: ( void, void ) 
//
//   Indicating that any still that is currently active
//   has been released.
//
// Raised from following domains: all
//
// Signaled at the end of any still: PGC still, Cell Still, or VOBU Still.
//

#define EC_DVD_CURRENT_TIME                     (EC_DVDBASE + 0x0b)
// Parameters: ( DWORD, BOOL ) 
// lParam1 is a DVD_TIMECODE which indicates the current 
//   playback time code in a BCD HH:MM:SS:FF format.
// lParam2 == 0  -->  time code is 25 frames/sec
// lParam2 == 1  -->  time code is 30 frames/sec (non-drop).
// lParam2 == 2  -->  time code is invalid (current playback time 
//                    cannot be determined for current title)
//
// Raised from following domains: DVD_DOMAIN_Title
//
// Signaled at the beginning of every VOBU, which occurs every .4 to 1.0 sec.
// This is only signaled for One_Sequential_PGC_Titles.


#define EC_DVD_ERROR                            (EC_DVDBASE + 0x0c)
// Parameters: ( DWORD, void) 
// lParam1 is an enum DVD_ERROR which notifies the app of some error condition.
//
// Raised from following domains: all
//

#define EC_DVD_WARNING                           (EC_DVDBASE + 0x0d)
// Parameters: ( DWORD, DWORD) 
// lParam1 is an enum DVD_WARNING which notifies the app of some warning condition.
// lParam2 contains more specific information about the warning (warning dependent)
//
// Raised from following domains: all
//

#define EC_DVD_CHAPTER_AUTOSTOP                  (EC_DVDBASE + 0x0e)
// Parameters: (BOOL, void)
// lParam1 is a BOOL which indicates the reason for the cancellation of ChapterPlayAutoStop
// lParam1 == 0 indicates successful completion of ChapterPlayAutoStop
// lParam1 == 1 indicates that ChapterPlayAutoStop is being cancelled as a result of another
//            IDVDControl call or the end of content has been reached & no more chapters
//            can be played.
//  Indicating that playback is stopped as a result of a call
//  to IDVDControl::ChapterPlayAutoStop()
//
// Raised from following domains : DVD_DOMAIN_TITLE
//

#define EC_DVD_NO_FP_PGC                         (EC_DVDBASE + 0x0f)
//  Parameters : (void, void)
//
//  Raised from the following domains : FP_DOM
//
//  Indicates that the DVD disc does not have a FP_PGC (First Play Program Chain)
//  and the DVD Navigator will not automatically load any PGC and start playback.
//

#define EC_DVD_PLAYBACK_RATE_CHANGE              (EC_DVDBASE + 0x10)
//  Parameters : (LONG, void)
//  lParam1 is a LONG indicating the new playback rate.
//  lParam1 < 0 indicates reverse playback mode.
//  lParam1 > 0 indicates forward playback mode
//  Value of lParam1 is the actual playback rate multiplied by 10000.
//  i.e. lParam1 = rate * 10000
//
//  Raised from the following domains : TT_DOM
//
//  Indicates that a rate change in playback has been initiated and the parameter
//  lParam1 indicates the new playback rate that is being used.
//

#define EC_DVD_PARENTAL_LEVEL_CHANGE            (EC_DVDBASE + 0x11)
//  Parameters : (LONG, void)
//  lParam1 is a LONG indicating the new parental level.
//
//  Raised from the following domains : VMGM_DOM
//
//  Indicates that an authored Nav command has changed the parental level
//  setting in the player.
//

#define EC_DVD_PLAYBACK_STOPPED                 (EC_DVDBASE + 0x12)
//  Parameters : (DWORD, void)
//
//  Raised from the following domains : All Domains
//
// Indicates that playback has been stopped as the Navigator has completed
// playback of the pgc and did not find any other branching instruction for
// subsequent playback.
//
//  The DWORD returns the reason for the completion of the playback.  See
//  The DVD_PB_STOPPED enumeration for details.
//

#define EC_DVD_ANGLES_AVAILABLE                 (EC_DVDBASE + 0x13)
//  Parameters : (BOOL, void)
//  lParam1 == 0 indicates that playback is not in an angle block and angles are
//             not available
//  lParam1 == 1 indicates that an angle block is being played back and angle changes
//             can be performed.
//
//  Indicates whether an angle block is being played and if angle changes can be 
//  performed. However, angle changes are not restricted to angle blocks and the
//  manifestation of the angle change can be seen only in an angle block.

#define EC_DVD_PLAYPERIOD_AUTOSTOP              (EC_DVDBASE + 0x14)
// Parameters: (void, void)
// Sent when the PlayPeriodInTitle completes or is cancelled
//
// Raised from following domains : DVD_DOMAIN_TITLE
//

#define EC_DVD_BUTTON_AUTO_ACTIVATED                 (EC_DVDBASE + 0x15)
// Parameters: (DWORD button, void)
// Sent when a button is automatically activated
//
// Raised from following domains : DVD_DOMAIN_MENU
//

#define EC_DVD_CMD_START                 (EC_DVDBASE + 0x16)
// Parameters: (CmdID, HRESULT)
// Sent when a command begins
//

#define EC_DVD_CMD_END                 (EC_DVDBASE + 0x17)
// Parameters: (CmdID, HRESULT)
// Sent when a command completes
//

#define EC_DVD_DISC_EJECTED                (EC_DVDBASE + 0x18)
// Parameters: none
// Sent when the nav detects that a disc was ejected and stops the playback
// The app does not need to take any action to stop the playback.
//

#define EC_DVD_DISC_INSERTED                (EC_DVDBASE + 0x19)
// Parameters: none
// Sent when the nav detects that a disc was inserted and the nav begins playback
// The app does not need to take any action to start the playback.
//

#define EC_DVD_CURRENT_HMSF_TIME                     (EC_DVDBASE + 0x1a)
// Parameters: ( ULONG, ULONG ) 
// lParam2 contains a union of the DVD_TIMECODE_FLAGS
// lParam1 contains a DVD_HMSF_TIMECODE.  Assign lParam1 to a ULONG then cast the
// ULONG as a DVD_HMSF_TIMECODE to use its values.
//
// Raised from following domains: DVD_DOMAIN_Title
//
// Signaled at the beginning of every VOBU, which occurs every .4 to 1.0 sec.

#define EC_DVD_KARAOKE_MODE                     (EC_DVDBASE + 0x1b)
// Parameters: ( BOOL, reserved ) 
// lParam1 is either TRUE (a karaoke track is being played) or FALSE (no karaoke data is being played).
//
#endif // __DVDEVCOD__