📄 winbase.h
字号:
} CREATE_THREAD_DEBUG_INFO, *LPCREATE_THREAD_DEBUG_INFO;
typedef struct _CREATE_PROCESS_DEBUG_INFO {
HANDLE hFile;
HANDLE hProcess;
HANDLE hThread;
LPVOID lpBaseOfImage;
DWORD dwDebugInfoFileOffset;
DWORD nDebugInfoSize;
LPVOID lpThreadLocalBase;
LPTHREAD_START_ROUTINE lpStartAddress;
LPVOID lpImageName;
WORD fUnicode;
} CREATE_PROCESS_DEBUG_INFO, *LPCREATE_PROCESS_DEBUG_INFO;
typedef struct _EXIT_THREAD_DEBUG_INFO {
DWORD dwExitCode;
} EXIT_THREAD_DEBUG_INFO, *LPEXIT_THREAD_DEBUG_INFO;
typedef struct _EXIT_PROCESS_DEBUG_INFO {
DWORD dwExitCode;
} EXIT_PROCESS_DEBUG_INFO, *LPEXIT_PROCESS_DEBUG_INFO;
typedef struct _LOAD_DLL_DEBUG_INFO {
HANDLE hFile;
LPVOID lpBaseOfDll;
DWORD dwDebugInfoFileOffset;
DWORD nDebugInfoSize;
LPVOID lpImageName;
WORD fUnicode;
} LOAD_DLL_DEBUG_INFO, *LPLOAD_DLL_DEBUG_INFO;
typedef struct _UNLOAD_DLL_DEBUG_INFO {
LPVOID lpBaseOfDll;
} UNLOAD_DLL_DEBUG_INFO, *LPUNLOAD_DLL_DEBUG_INFO;
typedef struct _OUTPUT_DEBUG_STRING_INFO {
LPSTR lpDebugStringData;
WORD fUnicode;
WORD nDebugStringLength;
} OUTPUT_DEBUG_STRING_INFO, *LPOUTPUT_DEBUG_STRING_INFO;
typedef struct _RIP_INFO {
DWORD dwError;
DWORD dwType;
} RIP_INFO, *LPRIP_INFO;
typedef struct _DEBUG_EVENT {
DWORD dwDebugEventCode;
DWORD dwProcessId;
DWORD dwThreadId;
union {
EXCEPTION_DEBUG_INFO Exception;
CREATE_THREAD_DEBUG_INFO CreateThread;
CREATE_PROCESS_DEBUG_INFO CreateProcessInfo;
EXIT_THREAD_DEBUG_INFO ExitThread;
EXIT_PROCESS_DEBUG_INFO ExitProcess;
LOAD_DLL_DEBUG_INFO LoadDll;
UNLOAD_DLL_DEBUG_INFO UnloadDll;
OUTPUT_DEBUG_STRING_INFO DebugString;
RIP_INFO RipInfo;
} u;
} DEBUG_EVENT, *LPDEBUG_EVENT;
#if !defined(MIDL_PASS)
typedef PCONTEXT LPCONTEXT;
typedef PEXCEPTION_RECORD LPEXCEPTION_RECORD;
typedef PEXCEPTION_POINTERS LPEXCEPTION_POINTERS;
#endif
#define DRIVE_UNKNOWN 0
#define DRIVE_NO_ROOT_DIR 1
#define DRIVE_REMOVABLE 2
#define DRIVE_FIXED 3
#define DRIVE_REMOTE 4
#define DRIVE_CDROM 5
#define DRIVE_RAMDISK 6
#ifndef _MAC
#define GetFreeSpace(w) (0x100000L)
#else
WINBASEAPI DWORD WINAPI GetFreeSpace(UINT);
#endif
#define FILE_TYPE_UNKNOWN 0x0000
#define FILE_TYPE_DISK 0x0001
#define FILE_TYPE_CHAR 0x0002
#define FILE_TYPE_PIPE 0x0003
#define FILE_TYPE_REMOTE 0x8000
#define STD_INPUT_HANDLE (DWORD)-10
#define STD_OUTPUT_HANDLE (DWORD)-11
#define STD_ERROR_HANDLE (DWORD)-12
#define NOPARITY 0
#define ODDPARITY 1
#define EVENPARITY 2
#define MARKPARITY 3
#define SPACEPARITY 4
#define ONESTOPBIT 0
#define ONE5STOPBITS 1
#define TWOSTOPBITS 2
#define IGNORE 0 // Ignore signal
#define INFINITE 0xFFFFFFFF // Infinite timeout
//
// Baud rates at which the communication device operates
//
#define CBR_110 110
#define CBR_300 300
#define CBR_600 600
#define CBR_1200 1200
#define CBR_2400 2400
#define CBR_4800 4800
#define CBR_9600 9600
#define CBR_14400 14400
#define CBR_19200 19200
#define CBR_38400 38400
#define CBR_56000 56000
#define CBR_57600 57600
#define CBR_115200 115200
#define CBR_128000 128000
#define CBR_256000 256000
//
// Error Flags
//
#define CE_RXOVER 0x0001 // Receive Queue overflow
#define CE_OVERRUN 0x0002 // Receive Overrun Error
#define CE_RXPARITY 0x0004 // Receive Parity Error
#define CE_FRAME 0x0008 // Receive Framing error
#define CE_BREAK 0x0010 // Break Detected
#define CE_TXFULL 0x0100 // TX Queue is full
#define CE_PTO 0x0200 // LPTx Timeout
#define CE_IOE 0x0400 // LPTx I/O Error
#define CE_DNS 0x0800 // LPTx Device not selected
#define CE_OOP 0x1000 // LPTx Out-Of-Paper
#define CE_MODE 0x8000 // Requested mode unsupported
#define IE_BADID (-1) // Invalid or unsupported id
#define IE_OPEN (-2) // Device Already Open
#define IE_NOPEN (-3) // Device Not Open
#define IE_MEMORY (-4) // Unable to allocate queues
#define IE_DEFAULT (-5) // Error in default parameters
#define IE_HARDWARE (-10) // Hardware Not Present
#define IE_BYTESIZE (-11) // Illegal Byte Size
#define IE_BAUDRATE (-12) // Unsupported BaudRate
//
// Events
//
#define EV_RXCHAR 0x0001 // Any Character received
#define EV_RXFLAG 0x0002 // Received certain character
#define EV_TXEMPTY 0x0004 // Transmitt Queue Empty
#define EV_CTS 0x0008 // CTS changed state
#define EV_DSR 0x0010 // DSR changed state
#define EV_RLSD 0x0020 // RLSD changed state
#define EV_BREAK 0x0040 // BREAK received
#define EV_ERR 0x0080 // Line status error occurred
#define EV_RING 0x0100 // Ring signal detected
#define EV_PERR 0x0200 // Printer error occured
#define EV_RX80FULL 0x0400 // Receive buffer is 80 percent full
#define EV_EVENT1 0x0800 // Provider specific event 1
#define EV_EVENT2 0x1000 // Provider specific event 2
//
// Escape Functions
//
#define SETXOFF 1 // Simulate XOFF received
#define SETXON 2 // Simulate XON received
#define SETRTS 3 // Set RTS high
#define CLRRTS 4 // Set RTS low
#define SETDTR 5 // Set DTR high
#define CLRDTR 6 // Set DTR low
#define RESETDEV 7 // Reset device if possible
#define SETBREAK 8 // Set the device break line.
#define CLRBREAK 9 // Clear the device break line.
//
// PURGE function flags.
//
#define PURGE_TXABORT 0x0001 // Kill the pending/current writes to the comm port.
#define PURGE_RXABORT 0x0002 // Kill the pending/current reads to the comm port.
#define PURGE_TXCLEAR 0x0004 // Kill the transmit queue if there.
#define PURGE_RXCLEAR 0x0008 // Kill the typeahead buffer if there.
#define LPTx 0x80 // Set if ID is for LPT device
//
// Modem Status Flags
//
#define MS_CTS_ON ((DWORD)0x0010)
#define MS_DSR_ON ((DWORD)0x0020)
#define MS_RING_ON ((DWORD)0x0040)
#define MS_RLSD_ON ((DWORD)0x0080)
//
// WaitSoundState() Constants
//
#define S_QUEUEEMPTY 0
#define S_THRESHOLD 1
#define S_ALLTHRESHOLD 2
//
// Accent Modes
//
#define S_NORMAL 0
#define S_LEGATO 1
#define S_STACCATO 2
//
// SetSoundNoise() Sources
//
#define S_PERIOD512 0 // Freq = N/512 high pitch, less coarse hiss
#define S_PERIOD1024 1 // Freq = N/1024
#define S_PERIOD2048 2 // Freq = N/2048 low pitch, more coarse hiss
#define S_PERIODVOICE 3 // Source is frequency from voice channel (3)
#define S_WHITE512 4 // Freq = N/512 high pitch, less coarse hiss
#define S_WHITE1024 5 // Freq = N/1024
#define S_WHITE2048 6 // Freq = N/2048 low pitch, more coarse hiss
#define S_WHITEVOICE 7 // Source is frequency from voice channel (3)
#define S_SERDVNA (-1) // Device not available
#define S_SEROFM (-2) // Out of memory
#define S_SERMACT (-3) // Music active
#define S_SERQFUL (-4) // Queue full
#define S_SERBDNT (-5) // Invalid note
#define S_SERDLN (-6) // Invalid note length
#define S_SERDCC (-7) // Invalid note count
#define S_SERDTP (-8) // Invalid tempo
#define S_SERDVL (-9) // Invalid volume
#define S_SERDMD (-10) // Invalid mode
#define S_SERDSH (-11) // Invalid shape
#define S_SERDPT (-12) // Invalid pitch
#define S_SERDFQ (-13) // Invalid frequency
#define S_SERDDR (-14) // Invalid duration
#define S_SERDSR (-15) // Invalid source
#define S_SERDST (-16) // Invalid state
#define NMPWAIT_WAIT_FOREVER 0xffffffff
#define NMPWAIT_NOWAIT 0x00000001
#define NMPWAIT_USE_DEFAULT_WAIT 0x00000000
#define FS_CASE_IS_PRESERVED FILE_CASE_PRESERVED_NAMES
#define FS_CASE_SENSITIVE FILE_CASE_SENSITIVE_SEARCH
#define FS_UNICODE_STORED_ON_DISK FILE_UNICODE_ON_DISK
#define FS_PERSISTENT_ACLS FILE_PERSISTENT_ACLS
#define FS_VOL_IS_COMPRESSED FILE_VOLUME_IS_COMPRESSED
#define FS_FILE_COMPRESSION FILE_FILE_COMPRESSION
#define FILE_MAP_COPY SECTION_QUERY
#define FILE_MAP_WRITE SECTION_MAP_WRITE
#define FILE_MAP_READ SECTION_MAP_READ
#define FILE_MAP_ALL_ACCESS SECTION_ALL_ACCESS
#define OF_READ 0x00000000
#define OF_WRITE 0x00000001
#define OF_READWRITE 0x00000002
#define OF_SHARE_COMPAT 0x00000000
#define OF_SHARE_EXCLUSIVE 0x00000010
#define OF_SHARE_DENY_WRITE 0x00000020
#define OF_SHARE_DENY_READ 0x00000030
#define OF_SHARE_DENY_NONE 0x00000040
#define OF_PARSE 0x00000100
#define OF_DELETE 0x00000200
#define OF_VERIFY 0x00000400
#define OF_CANCEL 0x00000800
#define OF_CREATE 0x00001000
#define OF_PROMPT 0x00002000
#define OF_EXIST 0x00004000
#define OF_REOPEN 0x00008000
#define OFS_MAXPATHNAME 128
typedef struct _OFSTRUCT {
BYTE cBytes;
BYTE fFixedDisk;
WORD nErrCode;
WORD Reserved1;
WORD Reserved2;
CHAR szPathName[OFS_MAXPATHNAME];
} OFSTRUCT, *LPOFSTRUCT, *POFSTRUCT;
//
// The MS-MIPS and Alpha compilers support intrinsic functions for interlocked
// increment, decrement, and exchange.
//
#if (defined(_M_MRX000) || defined(_M_ALPHA) || (defined(_M_PPC) && (_MSC_VER >= 1000))) && !defined(RC_INVOKED)
#define InterlockedIncrement _InterlockedIncrement
#define InterlockedDecrement _InterlockedDecrement
#define InterlockedExchange _InterlockedExchange
#define InterlockedExchangeAdd _InterlockedExchangeAdd
#define InterlockedCompareExchange _InterlockedCompareExchange
LONG
WINAPI
InterlockedIncrement(
LPLONG lpAddend
);
LONG
WINAPI
InterlockedDecrement(
LPLONG lpAddend
);
LONG
WINAPI
InterlockedExchange(
LPLONG Target,
LONG Value
);
PVOID
WINAPI
InterlockedCompareExchange (
PVOID *Destination,
PVOID Exchange,
PVOID Comperand
);
LONG
WINAPI
InterlockedExchangeAdd(
LPLONG Addend,
LONG Value
);
#pragma intrinsic(_InterlockedIncrement)
#pragma intrinsic(_InterlockedDecrement)
#pragma intrinsic(_InterlockedExchange)
#pragma intrinsic(_InterlockedCompareExchange)
#pragma intrinsic(_InterlockedExchangeAdd)
#else
#ifndef _NTOS_
WINBASEAPI
LONG
WINAPI
InterlockedIncrement(
LPLONG lpAddend
);
WINBASEAPI
LONG
WINAPI
InterlockedDecrement(
LPLONG lpAddend
);
WINBASEAPI
LONG
WINAPI
InterlockedExchange(
LPLONG Target,
LONG Value
);
WINBASEAPI
LONG
WINAPI
InterlockedExchangeAdd(
LPLONG Addend,
LONG Value
);
WINBASEAPI
PVOID
WINAPI
InterlockedCompareExchange (
PVOID *Destination,
PVOID Exchange,
PVOID Comperand
);
#endif /* NT_INCLUDED */
#endif
WINBASEAPI
BOOL
WINAPI
FreeResource(
HGLOBAL hResData
);
WINBASEAPI
LPVOID
WINAPI
LockResource(
HGLOBAL hResData
);
#define UnlockResource(hResData) ((hResData), 0)
#define MAXINTATOM 0xC000
#define MAKEINTATOM(i) (LPTSTR)((DWORD)((WORD)(i)))
#define INVALID_ATOM ((ATOM)0)
#ifndef _MAC
int
WINAPI
#else
int
CALLBACK
#endif
WinMain(
HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPSTR lpCmdLine,
int nShowCmd
);
WINBASEAPI
BOOL
WINAPI
FreeLibrary(
HMODULE hLibModule
);
WINBASEAPI
VOID
WINAPI
FreeLibraryAndExitThread(
HMODULE hLibModule,
DWORD dwExitCode
);
WINBASEAPI
BOOL
WINAPI
DisableThreadLibraryCalls(
HMODULE hLibModule
);
WINBASEAPI
FARPROC
WINAPI
GetProcAddress(
HMODULE hModule,
LPCSTR lpProcName
);
WINBASEAPI
DWORD
WINAPI
GetVersion( VOID );
WINBASEAPI
HGLOBAL
WINAPI
GlobalAlloc(
UINT uFlags,
DWORD dwBytes
);
WINBASEAPI
HGLOBAL
WINAPI
GlobalReAlloc(
HGLOBAL hMem,
DWORD dwBytes,
UINT uFlags
);
WINBASEAPI
DWORD
WINAPI
GlobalSize(
HGLOBAL hMem
);
WINBASEAPI
UINT
WINAPI
GlobalFlags(
HGLOBAL hMem
);
WINBASEAPI
LPVOID
WINAPI
GlobalLock(
HGLOBAL hMem
);
//!!!MWH My version win31 = DWORD WINAPI GlobalHandle(UINT)
WINBASEAPI
HGLOBAL
WINAPI
GlobalHandle(
LPCVOID pMem
);
WINBASEAPI
BOOL
WINAPI
GlobalUnlock(
HGLOBAL hMem
);
WINBASEAPI
HGLOBAL
WINAPI
GlobalFree(
HGLOBAL hMem
);
WINBASEAPI
UINT
WINAPI
GlobalCompact(
DWORD dwMinFree
);
WINBASEAPI
VOID
WINAPI
GlobalFix(
HGLOBAL hMem
);
WINBASEAPI
VOID
WINAPI
GlobalUnfix(
HGLOBAL hMem
);
WINBASEAPI
LPVOID
WINAPI
GlobalWire(
HGLOBAL hMem
);
WINBASEAPI
BOOL
WINAPI
GlobalUnWire(
HGLOBAL hMem
);
WINBASEAPI
VOID
WINAPI
GlobalMemoryStatus(
LPMEMORYSTATUS lpBuffer
);
WINBASEAPI
HLOCAL
WINAPI
LocalAlloc(
UINT uFlags,
UINT uBytes
);
WINBASEAPI
HLOCAL
WINAPI
LocalReAlloc(
HLOCAL hMem,
UINT uBytes,
UINT uFlags
);
WINBASEAPI
LPVOID
WINAPI
LocalLock(
HLOCAL hMem
);
WINBASEAPI
HLOCAL
WINAPI
LocalHandle(
LPCVOID pMem
);
WINBASEAPI
BOOL
WINAPI
LocalUnlock(
HLOCAL hMem
);
WINBASEAPI
UINT
WINAPI
LocalSize(
HLOCAL hMem
);
WINBASEAPI
UINT
WINAPI
LocalFlags(
HLOCAL hMem
);
WINBASEAPI
HLOCAL
WINAPI
LocalFree(
HLOCAL hMem
);
WINBASEAPI
UINT
WINAPI
LocalShrink(
HLOCAL hMem,
UINT cbNewSize
);
WINBASEAPI
UINT
WINAPI
LocalCompact(
UINT uMinFree
);
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -