hostapd.eap_user

来自「hostapd无线ＡＰ工具」· EAP_USER 代码 · 共 48 行

# hostapd user database for integrated EAP authenticator
# Each line must contain an identity, EAP method(s), and an optional password
# separated with whitespace (space or tab). The identity and password must be
# double quoted ("user"). [2] flag in the end of the line can be used to mark
# users for tunneled phase 2 authentication (e.g., within EAP-PEAP). In these
# cases, an anonymous identity can be used in the unencrypted phase 1 and the
# real user identity is transmitted only within the encrypted tunnel in phase
# 2. If non-anonymous access is needed, two user entries is needed, one for
# phase 1 and another with the same username for phase 2.
#
# EAP-TLS, EAP-PEAP, EAP-TTLS, and EAP-SIM do not use password option.
# EAP-MD5, EAP-MSCHAPV2, EAP-GTC, and EAP-PAX require a password.
# EAP-PEAP and EAP-TTLS require Phase 2 configuration.
#
# * can be used as a wildcard to match any user identity. The main purposes for
# this are to set anonymous phase 1 identity for EAP-PEAP and EAP-TTLS and to
# avoid having to configure every certificate for EAP-TLS authentication. The
# first matching entry is selected, so * should be used as the last phase 1
# user entry.
#
# Multiple methods can be configured to make the authenticator try them one by
# one until the peer accepts one. The method names are separated with a
# comma (,).
#
# [ver=0] and [ver=1] flags after EAP type PEAP can be used to force PEAP
# version based on the Phase 1 identity. Without this flag, the EAP
# authenticator advertises the highest supported version and select the version
# based on the first PEAP packet from the supplicant.

# Phase 1 users
"user"		MD5	"password"
"test user"	MD5	"secret"
"example user"	TLS
"DOMAIN\user"	MSCHAPV2	"password"
"gtc user"	GTC	"password"
"pax user"	PAX	"unknown"
"[e-mail]"	PAX	0123456789abcdef0123456789abcdef
"ttls"		TTLS
"not anonymous"	PEAP
*		PEAP,TTLS,TLS,SIM

# Phase 2 (tunnelled within EAP-PEAP or EAP-TTLS) users
"t-md5"		MD5	"password"	[2]
"DOMAIN\t-mschapv2"	MSCHAPV2	"password"	[2]
"t-gtc"		GTC	"password"	[2]
"not anonymous"	MSCHAPV2	"password"	[2]
"user"		MD5,GTC,MSCHAPV2	"password"	[2]