mipspro-tools.jam

C++的一个好库。。。现在很流行

# This file was originally based on gcc-tools.jam by David Abrahams.
#
# It has been written for and tested with MIPSpro 7.3 on IRIX 6.5 
# with a variety of setups.
#
# TODO list (in no particular order):
#
# - Add support for the dllversion free-feature using MIPSpro's
#   soname support.
# - Factor out repetitive code.
# - Decide if `$(<[1])' is better than `$(<)'.
# - Make further use of the `architecture' free feature by using
#   `-TARG' and others.
# - A free feature `mipspro-woff' so users can specify woff
#   values at the command-line.
# - Figure out what to do with the so_locations file.
# - Figure out what to do with the ii_files directory.

# The following #// line will be used by the regression test table generation
# program as the column heading for HTML tables. Must not include version number.
#//<a href="http://www.sgi.com/developers/devtools/languages/mipspro.html">SGI<br>MIPSpro</a>

# compute directories for invoking MIPSpro: first try ROOT and
# TOOLROOT, which are traditionally used for this purpose.
MIPSPRO_ROOT_DIRECTORY ?= "$(ROOT)/usr" ;
MIPSPRO_TOOLROOT_DIRECTORY ?= "$(TOOLROOT)/usr" ;

# Either ROOT or TOOLROOT missing? Fall back to the default.
MIPSPRO_ROOT_DIRECTORY ?= "/usr" ;
MIPSPRO_TOOLROOT_DIRECTORY ?= "/usr" ;

# For most users, either ROOT/TOOLROOT or
# MIPSPRO_ROOT_DIRECTORY/MIPSPRO_TOOLROOT_DIRECTORY should be
# sufficient. Users needing to further customize the executable
# directory or include directory can use MIPSPRO_BIN_DIRECTORY,
# MIPSPRO_INCLUDE_DIRECTORY, and MIPSPRO_C++INCLUDE_DIRECTORY.

MIPSPRO_BIN_DIRECTORY ?= "$(MIPSPRO_TOOLROOT_DIRECTORY)/bin" ;

MIPSPRO_INCLUDE_DIRECTORY ?= "$(MIPSPRO_TOOLROOT_DIRECTORY)/include"
                             "$(MIPSPRO_ROOT_DIRECTORY)/include" ;

MIPSPRO_C++INCLUDE_DIRECTORY ?= "$(MIPSPRO_INCLUDE_DIRECTORY)/CC" ;

# Because we have special logic for finding directories based on
# the ABI and ISA, it is difficult to have a separate user-definable
# variable to specify the library paths. As mentioned above, 
# MIPSPRO_ROOT_DIRECTORY should be good enough for most users.

local MIPSPRO_STDLIB_ROOTS = "$(MIPSPRO_TOOLROOT_DIRECTORY)"
                             "$(MIPSPRO_ROOT_DIRECTORY)"
                           ;
local MIPSPRO_STDLIB_MIPS3_SUBDIRECTORIES = "mips3" "" ;
local MIPSPRO_STDLIB_MIPS4_SUBDIRECTORIES = "mips4" "" ;

flags mipspro LINKFLAGS : -nostdlib ;
flags mipspro LINKFLAGS <target-type>$(SHARED_TYPES) : -shared ;
flags mipspro LINKFLAGS <debug-symbols>off : -s ;

# We better link the maths library unconditionally.
flags mipspro FINDLIBS : m ;

flags mipspro DEFINES <threading>multi : _SGI_MP_SOURCE ;
flags mipspro FINDLIBS <threading>multi : pthread ;

flags mipspro CFLAGS : -nostdinc
                       -LANG:std -OPT:Olimit=0 -OPT:IEEE_NaN_inf=ON -no_auto_include
                     ;

flags mipspro CFLAGS <address-model>default : -n32 ;
flags mipspro CFLAGS <address-model>32 : -n32 ;
flags mipspro CFLAGS <address-model>64 : -64 ;
flags mipspro CFLAGS <architecture>native : -mips3 ;
flags mipspro CFLAGS <architecture>mips3 : -mips3 ;
flags mipspro CFLAGS <architecture>mips4 : -mips4 ;

flags mipspro CFLAGS <optimization>off   : -O0 ;
flags mipspro CFLAGS <optimization>speed : -O3 ;
flags mipspro CFLAGS <optimization>space : -O2 ;

flags mipspro CFLAGS <debug-symbols>off : -g0 ;
flags mipspro CFLAGS <debug-symbols>on/<optimization>off   : -g  ;
flags mipspro CFLAGS <debug-symbols>on/<optimization>speed : -g3 ;
flags mipspro CFLAGS <debug-symbols>on/<optimization>space : -g3 ;

# Uncomment the following to enable various SGI extensions.

#flags mipspro DEFINES : _SGI_SOURCE ;

# If you want more warnings, uncomment the following lines. These are
# a few warning numbers that you'll probably want to disable.
# 1375: The destructor for base class is not virtual.
# 1424: Template parameter not used in declaring the argument types of function template.
# 1234: Access control is not specified.

#flags mipspro CFLAGS : -fullwarn -woff 1375,1424,1234 ;

# For some C++ apps, adding -IPA can make a big difference. However, because
# it does global optimizations such as inlining code between compilation
# units, it introduces a lot of dependancies that this build system is
# unable to track. When using -IPA here, be sure to run the `clean' target
# before each build to ensure that everything is rebuilt properly.

#flags mipspro CFLAGS <optimization>speed : -IPA ;
#flags mipspro LINKFLAGS <optimization>speed : -IPA ;

# An option for <inlining>full is -INLINE:all, however that may cause
# too much to be inlined. I don't think that level of inlining is what
# is meant by <inlining>full.

flags mipspro CFLAGS <inlining>off : -INLINE:none ;
flags mipspro CFLAGS <inlining>on : -INLINE ;
flags mipspro CFLAGS <inlining>full : -INLINE ;

flags mipspro C++FLAGS <exception-handling>off : -LANG:exceptions=OFF ;

flags mipspro STDHDRS : "$(MIPSPRO_INCLUDE_DIRECTORY)" ;
flags mipspro STDC++HDRS : "$(MIPSPRO_C++INCLUDE_DIRECTORY)"
                           "$(BOOST_ROOT)/boost/compatibility/cpp_c_headers"
                         ;

flags mipspro STDLIBPATH <address-model>default/<architecture>mips3 <architecture>native :
     "$(MIPSPRO_STDLIB_ROOTS)/lib32/$(MIPSPRO_STDLIB_MIPS3_SUBDIRECTORIES)"
      ;
flags mipspro STDLIBPATH <address-model>default/<architecture>mips4 :
     "$(MIPSPRO_STDLIB_ROOTS)/lib32/$(MIPSPRO_STDLIB_MIPS4_SUBDIRECTORIES)"
      ;
flags mipspro STDLIBPATH <address-model>32/<architecture>mips3 <architecture>native :
     "$(MIPSPRO_STDLIB_ROOTS)/lib32/$(MIPSPRO_STDLIB_MIPS3_SUBDIRECTORIES)"
      ;
flags mipspro STDLIBPATH <address-model>32/<architecture>mips4 :
     "$(MIPSPRO_STDLIB_ROOTS)/lib32/$(MIPSPRO_STDLIB_MIPS4_SUBDIRECTORIES)"
      ;
flags mipspro STDLIBPATH <address-model>64/<architecture>mips3 <architecture>native :
     "$(MIPSPRO_STDLIB_ROOTS)/lib64/$(MIPSPRO_STDLIB_MIPS3_SUBDIRECTORIES)"
      ;
flags mipspro STDLIBPATH <address-model>64/<architecture>mips4 :
     "$(MIPSPRO_STDLIB_ROOTS)/lib64/$(MIPSPRO_STDLIB_MIPS4_SUBDIRECTORIES)"
      ;

flags mipspro HDRS <include> ;
flags mipspro UNDEFS <undef> ;
flags mipspro DEFINES <define> ;
flags mipspro CFLAGS <cflags> ;
flags mipspro C++FLAGS <cxxflags> ;
flags mipspro LIBPATH <library-path> ;
flags mipspro NEEDLIBS <library-file> ;
flags mipspro FINDLIBS <find-library> ;
flags mipspro SYSHDRS <sysinclude> ;
flags mipspro LINKFLAGS <linkflags> ;
flags mipspro ARFLAGS <arflags> ;

#### Link (for C++) ####

rule Link-action
{
    mipspro-Link-action "$(<)" : "$(>)" ;
}

# for mipspro, we repeat all libraries so that dependencies are always resolved
actions mipspro-Link-action bind NEEDLIBS
{
    "$(MIPSPRO_BIN_DIRECTORY)/CC" \
        -o "$(<)" \
        "$(>)" \
        "-U$(UNDEFS)" \
        "-D$(DEFINES)" \
        "$(CFLAGS)" \
        "$(C++FLAGS)" \
        "-I$(HDRS)" \
        "-I$(STDC++HDRS)" \
        "-I$(STDHDRS)" \
        "-I$(SYSHDRS)" \
        "$(LINKFLAGS)" \
        "$(NEEDLIBS)" \
        "$(NEEDLIBS)" \
        "-L$(LIBPATH)" \
        "-L$(STDLIBPATH)" \
        "-l$(FINDLIBS)"
}

#### Cc #####

rule Cc-action
{
    mipspro-Cc-action "$(<)" : "$(>)" ;
}

actions mipspro-Cc-action
{
    "$(MIPSPRO_BIN_DIRECTORY)/cc" -c \
        "-U$(UNDEFS)" \
        "-D$(DEFINES)" \
        "$(CFLAGS)" \
        "-I$(HDRS)" \
        "-I$(STDHDRS)" \
        "-I$(SYSHDRS)" \
        -o "$(<)" \
        "$(>)"
}

#### C++ ####

rule C++-action
{
    mipspro-C++-action "$(<)" : "$(>)" ;
}

actions mipspro-C++-action
{
    "$(MIPSPRO_BIN_DIRECTORY)/CC" -c \
        "-U$(UNDEFS)" \
        "-D$(DEFINES)" \
        "$(CFLAGS)" \
        "$(C++FLAGS)" \
        "-I$(HDRS)" \
        "-I$(STDC++HDRS)" \
        "-I$(STDHDRS)" \
        "-I$(SYSHDRS)" \
        -o "$(<)" \
        "$(>)"
}

#### Archive ####

rule Archive-action
{
    mipspro-Archive-action "$(<)" : "$(>)" ;
}

# For MIPSpro, we don't use update piecemeal together because we're
# not using the command `ar' directly. We use `CC -ar' so that the
# prelinker gets run, however when we do this, we loose the ability
# to update individual compilation units in an archive.

actions mipspro-Archive-action
{
    "$(MIPSPRO_BIN_DIRECTORY)/CC" -ar \
        "-U$(UNDEFS)" \
        "-D$(DEFINES)" \
        "$(CFLAGS)" \
        "$(C++FLAGS)" \
        "-I$(HDRS)" \
        "-I$(STDC++HDRS)" \
        "-I$(STDHDRS)" \
        "-I$(SYSHDRS)" \
        "-WR,$(ARFLAGS)" \
        -o "$(<)" \
        "$(>)"
}