⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 sdram.c

📁 linux下的BOOT程序原码,有需要的可以来下,保证好用
💻 C
字号:
/* * (C) Copyright 2005 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2002-2004 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#include <ppc4xx.h>#include <asm/processor.h>#ifdef CONFIG_SDRAM_BANK0#define mtsdram0(reg, data)  mtdcr(memcfga,reg);mtdcr(memcfgd,data)struct sdram_conf_s {	unsigned long size;	unsigned long reg;};typedef struct sdram_conf_s sdram_conf_t;#ifndef CFG_SDRAM_TABLEsdram_conf_t mb0cf[] = {	{(128 << 20), 0x000A4001},      /* (0-128MB) Address Mode 3, 13x10(4) */	{(64 << 20),  0x00084001},      /* (0-64MB) Address Mode 3, 13x9(4)   */	{(32 << 20),  0x00062001},      /* (0-32MB) Address Mode 2, 12x9(4)   */	{(16 << 20),  0x00046001},      /* (0-16MB) Address Mode 4, 12x8(4)   */	{(4 << 20),   0x00008001},      /* (0-4MB) Address Mode 5, 11x8(2)    */};#elsesdram_conf_t mb0cf[] = CFG_SDRAM_TABLE;#endif#define	N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))#ifndef CONFIG_440/* * Autodetect onboard SDRAM on 405 platforms */void sdram_init(void){	ulong sdtr1;	ulong rtr;	int i;	/*	 * Support for 100MHz and 133MHz SDRAM	 */	if (get_bus_freq(0) > 100000000) {		/*		 * 133 MHz SDRAM		 */		sdtr1 = 0x01074015;		rtr = 0x07f00000;	} else {		/*		 * default: 100 MHz SDRAM		 */		sdtr1 = 0x0086400d;		rtr = 0x05f00000;	}	for (i=0; i<N_MB0CF; i++) {		/*		 * Disable memory controller.		 */		mtsdram0(mem_mcopt1, 0x00000000);		/*		 * Set MB0CF for bank 0.		 */		mtsdram0(mem_mb0cf, mb0cf[i].reg);		mtsdram0(mem_sdtr1, sdtr1);		mtsdram0(mem_rtr, rtr);		udelay(200);		/*		 * Set memory controller options reg, MCOPT1.		 * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst		 * read/prefetch.		 */		mtsdram0(mem_mcopt1, 0x80800000);		udelay(10000);		if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {			/*			 * OK, size detected -> all done			 */			return;		}	}}#else /* CONFIG_440 *//* * Autodetect onboard DDR SDRAM on 440 platforms * * NOTE: Some of the hardcoded values are hardware dependant, *       so this should be extended for other future boards *       using this routine! */long int initdram(int board_type){	int i;	for (i=0; i<N_MB0CF; i++) {		/*		 * Disable memory controller.		 */		mtsdram(mem_cfg0, 0x00000000);		/*		 * Setup some default		 */		mtsdram(mem_uabba, 0x00000000);	/* ubba=0 (default)             */		mtsdram(mem_slio, 0x00000000);	/* rdre=0 wrre=0 rarw=0         */		mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal)		*/		mtsdram(mem_wddctr, 0x00000000); /* wrcp=0 dcd=0		*/		mtsdram(mem_clktr, 0x40000000);	/* clkp=1 (90 deg wr) dcdt=0    */		/*		 * Following for CAS Latency = 2.5 @ 133 MHz PLB		 */		mtsdram(mem_b0cr, mb0cf[i].reg);		mtsdram(mem_tr0, 0x41094012);		mtsdram(mem_tr1, 0x80800800);	/* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/		mtsdram(mem_rtr, 0x7e000000);	/* Interval 15.20祍 @ 133MHz PLB*/		mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM*/		udelay(400);			/* Delay 200 usecs (min)	*/		/*		 * Enable the controller, then wait for DCEN to complete		 */		mtsdram(mem_cfg0, 0x86000000);	/* DCEN=1, PMUD=1, 64-bit       */		udelay(10000);		if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {			/*			 * OK, size detected -> all done			 */			return mb0cf[i].size;		}	}	return 0;				/* nothing found !		*/}#endif /* CONFIG_440 */#endif /* CONFIG_SDRAM_BANK0 */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -