⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 u-boot.h

📁 linux下的BOOT程序原码,有需要的可以来下,保证好用
💻 H
字号:
/* * (C) Copyright 2000 - 2002 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * ******************************************************************** * NOTE: This header file defines an interface to U-Boot. Including * this (unmodified) header file in another file is considered normal * use of U-Boot, and does *not* fall under the heading of "derived * work". ******************************************************************** */#ifndef __U_BOOT_H__#define __U_BOOT_H__/* * Board information passed to Linux kernel from U-Boot * * include/asm-ppc/u-boot.h */#ifndef __ASSEMBLY__typedef struct bd_info {	unsigned long	bi_memstart;	/* start of DRAM memory */	unsigned long	bi_memsize;	/* size	 of DRAM memory in bytes */	unsigned long	bi_flashstart;	/* start of FLASH memory */	unsigned long	bi_flashsize;	/* size	 of FLASH memory */	unsigned long	bi_flashoffset; /* reserved area for startup monitor */	unsigned long	bi_sramstart;	/* start of SRAM memory */	unsigned long	bi_sramsize;	/* size	 of SRAM memory */#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \	|| defined(CONFIG_E500)	unsigned long	bi_immr_base;	/* base of IMMR register */#endif#if defined(CONFIG_MPC5xxx)	unsigned long	bi_mbar_base;	/* base of internal registers */#endif#if defined(CONFIG_MPC83XX)	unsigned long	bi_immrbar;#endif#if defined(CONFIG_MPC8220)	unsigned long	bi_mbar_base;	/* base of internal registers */	unsigned long   bi_inpfreq;     /* Input Freq, In MHz */	unsigned long   bi_pcifreq;     /* PCI Freq, in MHz */	unsigned long   bi_pevfreq;     /* PEV Freq, in MHz */	unsigned long   bi_flbfreq;     /* Flexbus Freq, in MHz */	unsigned long   bi_vcofreq;     /* VCO Freq, in MHz */#endif	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */	unsigned long	bi_ip_addr;	/* IP Address */	unsigned char	bi_enetaddr[6];	/* Ethernet adress */	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */#if defined(CONFIG_CPM2)	unsigned long	bi_cpmfreq;	/* CPM_CLK Freq, in MHz */	unsigned long	bi_brgfreq;	/* BRG_CLK Freq, in MHz */	unsigned long	bi_sccfreq;	/* SCC_CLK Freq, in MHz */	unsigned long	bi_vco;		/* VCO Out from PLL, in MHz */#endif#if defined(CONFIG_MPC5xxx)	unsigned long	bi_ipbfreq;	/* IPB Bus Freq, in MHz */	unsigned long	bi_pcifreq;	/* PCI Bus Freq, in MHz */#endif	unsigned long	bi_baudrate;	/* Console Baudrate */#if defined(CONFIG_405)   || \    defined(CONFIG_405GP) || \    defined(CONFIG_405CR) || \    defined(CONFIG_405EP) || \    defined(CONFIG_440)	unsigned char	bi_s_version[4];	/* Version of this structure */	unsigned char	bi_r_version[32];	/* Version of the ROM (AMCC) */	unsigned int	bi_procfreq;	/* CPU (Internal) Freq, in Hz */	unsigned int	bi_plb_busfreq;	/* PLB Bus speed, in Hz */	unsigned int	bi_pci_busfreq;	/* PCI Bus speed, in Hz */	unsigned char	bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */#endif#if defined(CONFIG_HYMOD)	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */#endif#ifdef CONFIG_HAS_ETH1	/* second onboard ethernet port */	unsigned char   bi_enet1addr[6];#endif#ifdef CONFIG_HAS_ETH2	/* third onboard ethernet port */	unsigned char	bi_enet2addr[6];#endif#ifdef CONFIG_HAS_ETH3	unsigned char   bi_enet3addr[6];#endif#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \    defined(CONFIG_440EP) || defined(CONFIG_440GR)	unsigned int	bi_opbfreq;		/* OPB clock in Hz */	int		bi_iic_fast[2];		/* Use fast i2c mode */#endif#if defined(CONFIG_NX823)	unsigned char	bi_sernum[8];#endif#if defined(CONFIG_4xx)#if defined(CONFIG_440GX)	int 		bi_phynum[4];           /* Determines phy mapping */	int 		bi_phymode[4];          /* Determines phy mode */#elif defined(CONFIG_405EP) || defined(CONFIG_440)	int 		bi_phynum[2];           /* Determines phy mapping */	int 		bi_phymode[2];          /* Determines phy mode */#else	int 		bi_phynum[1];           /* Determines phy mapping */	int 		bi_phymode[1];          /* Determines phy mode */#endif#endif /* defined(CONFIG_4xx) */} bd_t;#endif /* __ASSEMBLY__ */#endif	/* __U_BOOT_H__ */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -