glcd.c

ssd1289驱动源码

/****************************************Copyright (c)**************************************************                         
**
**                                 http://www.powermcu.com
**
**--------------File Info-------------------------------------------------------------------------------
** File name:			GLCD.c
** Descriptions:		已测试通过SSD1289、ILI9320、R61505U、SSD1298、ST7781、SPFD5408B、ILI9325、ILI9328
**						
**------------------------------------------------------------------------------------------------------
** Created by:			AVRman
** Created date:		2011-3-29
** Version:				2.0
** Descriptions:		The original version
**
**------------------------------------------------------------------------------------------------------
** Modified by:			
** Modified date:	
** Version:
** Descriptions:		
********************************************************************************************************/

/* Includes ------------------------------------------------------------------*/
#include "GLCD.h" 
#include "HzLib.h"
#include "AsciiLib.h"

/* Private variables ---------------------------------------------------------*/
static uint8_t LCD_Code;

/* Private define ------------------------------------------------------------*/
#define  ILI9320    0  /* 0x9320 */
#define  ILI9325    1  /* 0x9325 */
#define  ILI9328    2  /* 0x9328 */
#define  ILI9331    3  /* 0x9331 */
#define  SSD1298    4  /* 0x8999 */
#define  SSD1289    5  /* 0x8989 */
#define  ST7781     6  /* 0x7783 */
#define  LGDP4531   7  /* 0x4531 */
#define  SPFD5408B  8  /* 0x5408 */
#define  R61505U    9  /* 0x1505 0x0505 */	   
#define  HX8347D    10 /* 0x0047 */
#define  HX8347A    11 /* 0x0047 */	
#define  LGDP4535   12 /* 0x4535 */  
#define  SSD2119    13 /* 3.5 LCD 0x9919 */


/*******************************************************************************
* Function Name  : Lcd_Configuration
* Description    : Configures LCD Control lines
* Input          : None
* Output         : None
* Return         : None
* Attention		 : None
*******************************************************************************/
static void LCD_Configuration(void)
{
	GPIO_InitTypeDef GPIO_InitStructure;
	
	/* Enable GPIOD and GPIOE clocks */
	RCC_APB2PeriphClockCmd( RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOE, ENABLE);  
	                    
	/* PE.00(D0), PE.01(D1), PE.02(D2), PE.03(D3), PE.04(D4), PE.05(D5), PE.06(D6), PE.07(D7), PE.08(D8)
	 PE.09(D9), PE.10(D10), PE.11(D11), PE.12(D12), PE.13(D13), PE.14(D14), PE.15(D15)   */
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_All;
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
	GPIO_Init(GPIOE, &GPIO_InitStructure);
	
	/* PD.13(RS), PD.14(WR), PD.15(RD) */
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13|GPIO_Pin_14|GPIO_Pin_15;
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
	GPIO_Init(GPIOD, &GPIO_InitStructure);
	
	/* PD.12(CS)*/
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12;
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
	GPIO_Init(GPIOD, &GPIO_InitStructure);
}

/*******************************************************************************
* Function Name  : LCD_WriteReg
* Description    : LCD控制器寄存器地址
* Input          : - index: 寄存器地址
* Output         : None
* Return         : None
* Attention		 : None
*******************************************************************************/
__inline void LCD_WriteIndex(uint16_t index)
{
	Clr_Rs;
	Set_nRd;
	
	GPIOE->ODR = index;	 /* GPIO_Write(GPIOE,index); */
	
	Clr_nWr;
	Set_nWr;
}

/*******************************************************************************
* Function Name  : LCD_WriteReg
* Description    : LCD寄存器数据
* Input          : - index: 寄存器数据
* Output         : None
* Return         : None
* Attention		 : None
*******************************************************************************/
__inline void LCD_WriteData(uint16_t data)
{
	Set_Rs;
	
	GPIOE->ODR = data;	 /* GPIO_Write(GPIOE,data); */
	
	Clr_nWr;
	Set_nWr;
}

/*******************************************************************************
* Function Name  : LCD_ReadData
* Description    : 读取控制器数据
* Input          : None
* Output         : None
* Return         : 返回读取到的数据
* Attention		 : None
*******************************************************************************/
__inline uint16_t LCD_ReadData(void)
{ 
	uint16_t value;

	Set_Rs;
	Set_nWr;
	Clr_nRd;

/* 
    PE.00(D0), PE.01(D1), PE.02(D2), PE.03(D3), PE.04(D4), PE.05(D5), PE.06(D6), PE.07(D7), PE.08(D8)
    PE.09(D9), PE.10(D10), PE.11(D11), PE.12(D12), PE.13(D13), PE.14(D14), PE.15(D15)   */
/* 
    GPIO_InitTypeDef GPIO_InitStructure; 
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_All;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
    GPIO_Init(GPIOE, &GPIO_InitStructure);
*/
	GPIOE->CRH = 0x44444444;
	GPIOE->CRL = 0x44444444;
/*
    value = GPIO_ReadInputData(GPIOE);
    value = GPIO_ReadInputData(GPIOE);
*/
    value = GPIOE->IDR;
    value = GPIOE->IDR;

/*  
    PE.00(D0), PE.01(D1), PE.02(D2), PE.03(D3), PE.04(D4), PE.05(D5), PE.06(D6), PE.07(D7), PE.08(D8)
    PE.09(D9), PE.10(D10), PE.11(D11), PE.12(D12), PE.13(D13), PE.14(D14), PE.15(D15)   */
/*
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_All;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
    GPIO_Init(GPIOE, &GPIO_InitStructure);
*/
    GPIOE->CRH = 0x33333333;
    GPIOE->CRL = 0x33333333;

    Set_nRd;

    return value;
}


/*******************************************************************************
* Function Name  : LCD_WriteReg
* Description    : Writes to the selected LCD register.
* Input          : - LCD_Reg: address of the selected register.
*                  - LCD_RegValue: value to write to the selected register.
* Output         : None
* Return         : None
* Attention		 : None
*******************************************************************************/
__inline void LCD_WriteReg(uint16_t LCD_Reg,uint16_t LCD_RegValue)
{ 
	/* Write 16-bit Index, then Write Reg */  
	Clr_Cs;
	LCD_WriteIndex(LCD_Reg);         
	/* Write 16-bit Reg */
	LCD_WriteData(LCD_RegValue);  
	Set_Cs; 
}

/*******************************************************************************
* Function Name  : LCD_WriteReg
* Description    : Reads the selected LCD Register.
* Input          : None
* Output         : None
* Return         : LCD Register Value.
* Attention		 : None
*******************************************************************************/
__inline uint16_t LCD_ReadReg(uint16_t LCD_Reg)
{
	uint16_t LCD_RAM;
	
	/* Write 16-bit Index (then Read Reg) */
	Clr_Cs;
	LCD_WriteIndex(LCD_Reg);
	/* Read 16-bit Reg */
	LCD_RAM = LCD_ReadData();      	
	Set_Cs;
	return LCD_RAM;
}

/*******************************************************************************
* Function Name  : LCD_SetCursor
* Description    : Sets the cursor position.
* Input          : - Xpos: specifies the X position.
*                  - Ypos: specifies the Y position. 
* Output         : None
* Return         : None
* Attention		 : None
*******************************************************************************/
static void LCD_SetCursor( uint16_t Xpos, uint16_t Ypos )
{
    #if  ( DISP_ORIENTATION == 90 ) || ( DISP_ORIENTATION == 270 )
	
 	uint16_t temp = Xpos;

			 Xpos = Ypos;
			 Ypos = ( MAX_X - 1 ) - temp;  

	#elif  ( DISP_ORIENTATION == 0 ) || ( DISP_ORIENTATION == 180 )
		
	#endif

  switch( LCD_Code )
  {
     default:		 /* 0x9320 0x9325 0x9328 0x9331 0x5408 0x1505 0x0505 0x7783 0x4531 0x4535 */
          LCD_WriteReg(0x0020, Xpos );     
          LCD_WriteReg(0x0021, Ypos );     
	      break; 

     case SSD1298: 	 /* 0x8999 */
     case SSD1289:   /* 0x8989 */
	      LCD_WriteReg(0x004e, Xpos );      
          LCD_WriteReg(0x004f, Ypos );          
	      break;  

     case HX8347A: 	 /* 0x0047 */
     case HX8347D: 	 /* 0x0047 */
	      LCD_WriteReg(0x02, Xpos>>8 );                                                  
	      LCD_WriteReg(0x03, Xpos );  

	      LCD_WriteReg(0x06, Ypos>>8 );                           
	      LCD_WriteReg(0x07, Ypos );    
	
	      break;     
     case SSD2119:	 /* 3.5 LCD 0x9919 */
	      break; 
  }
}

/*******************************************************************************
* Function Name  : LCD_Delay
* Description    : Delay Time
* Input          : - nCount: Delay Time
* Output         : None
* Return         : None
* Return         : None
* Attention		 : None
*******************************************************************************/
static void delay_ms(uint16_t ms)    
{ 
	uint16_t i,j; 
	for( i = 0; i < ms; i++ )
	{ 
		for( j = 0; j < 1141; j++ );
	}
} 

/*******************************************************************************
* Function Name  : LCD_Initializtion
* Description    : Initialize TFT Controller.
* Input          : None
* Output         : None
* Return         : None
* Attention		 : None
*******************************************************************************/
void LCD_Initializtion(void)
{
	uint16_t DeviceCode;
	
	LCD_Configuration();
	DeviceCode = LCD_ReadReg(0x0000);		/* 读取屏ID	*/	
	/* 不同屏驱动IC 初始化不同 */
	if( DeviceCode == 0x9325 || DeviceCode == 0x9328 )	
	{
		LCD_Code = ILI9325;
		LCD_WriteReg(0x00e7,0x0010);      
		LCD_WriteReg(0x0000,0x0001);  	/* start internal osc */
		LCD_WriteReg(0x0001,0x0100);     
		LCD_WriteReg(0x0002,0x0700); 	/* power on sequence */
		LCD_WriteReg(0x0003,(1<<12)|(1<<5)|(1<<4)|(0<<3) ); 	/* importance */
		LCD_WriteReg(0x0004,0x0000);                                   
		LCD_WriteReg(0x0008,0x0207);	           
		LCD_WriteReg(0x0009,0x0000);         
		LCD_WriteReg(0x000a,0x0000); 	/* display setting */        
		LCD_WriteReg(0x000c,0x0001);	/* display setting */        
		LCD_WriteReg(0x000d,0x0000); 			        
		LCD_WriteReg(0x000f,0x0000);
		/* Power On sequence */
		LCD_WriteReg(0x0010,0x0000);   
		LCD_WriteReg(0x0011,0x0007);
		LCD_WriteReg(0x0012,0x0000);                                                                 
		LCD_WriteReg(0x0013,0x0000);                 
		delay_ms(50);  /* delay 50 ms */		
		LCD_WriteReg(0x0010,0x1590);   
		LCD_WriteReg(0x0011,0x0227);
		delay_ms(50);  /* delay 50 ms */		
		LCD_WriteReg(0x0012,0x009c);                  
		delay_ms(50);  /* delay 50 ms */		
		LCD_WriteReg(0x0013,0x1900);   
		LCD_WriteReg(0x0029,0x0023);
		LCD_WriteReg(0x002b,0x000e);
		delay_ms(50);  /* delay 50 ms */		
		LCD_WriteReg(0x0020,0x0000);                                                            
		LCD_WriteReg(0x0021,0x0000);           
		delay_ms(50);  /* delay 50 ms */		
		LCD_WriteReg(0x0030,0x0007); 
		LCD_WriteReg(0x0031,0x0707);   
		LCD_WriteReg(0x0032,0x0006);
		LCD_WriteReg(0x0035,0x0704);
		LCD_WriteReg(0x0036,0x1f04); 
		LCD_WriteReg(0x0037,0x0004);
		LCD_WriteReg(0x0038,0x0000);        
		LCD_WriteReg(0x0039,0x0706);     
		LCD_WriteReg(0x003c,0x0701);
		LCD_WriteReg(0x003d,0x000f);
		delay_ms(50);  /* delay 50 ms */		
		LCD_WriteReg(0x0050,0x0000);        
		LCD_WriteReg(0x0051,0x00ef);   
		LCD_WriteReg(0x0052,0x0000);     
		LCD_WriteReg(0x0053,0x013f);
		LCD_WriteReg(0x0060,0xa700);        
		LCD_WriteReg(0x0061,0x0001); 
		LCD_WriteReg(0x006a,0x0000);
		LCD_WriteReg(0x0080,0x0000);
		LCD_WriteReg(0x0081,0x0000);
		LCD_WriteReg(0x0082,0x0000);
		LCD_WriteReg(0x0083,0x0000);
		LCD_WriteReg(0x0084,0x0000);