wb_dma_de.v

DMA的控制器的IP核,和ATA控制器配合,可以实现DMA方式高速传输数据.

/////////////////////////////////////////////////////////////////////
////                                                             ////
////  WISHBONE DMA DMA Engine Core                               ////
////                                                             ////
////                                                             ////
////  Author: Rudolf Usselmann                                   ////
////          [e-mail]                                      ////
////                                                             ////
////                                                             ////
////  Downloaded from: http://www.opencores.org/cores/wb_dma/    ////
////                                                             ////
/////////////////////////////////////////////////////////////////////
////                                                             ////
//// Copyright (C) 2000-2002 Rudolf Usselmann                    ////
////                         www.asics.ws                        ////
////                         [e-mail]                       ////
////                                                             ////
//// This source file may be used and distributed without        ////
//// restriction provided that this copyright statement is not   ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer.////
////                                                             ////
////     THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY     ////
//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED   ////
//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS   ////
//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR      ////
//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,         ////
//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES    ////
//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE   ////
//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR        ////
//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  ////
//// LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT  ////
//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  ////
//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE         ////
//// POSSIBILITY OF SUCH DAMAGE.                                 ////
////                                                             ////
/////////////////////////////////////////////////////////////////////

//  CVS Log
//
//  $Id: wb_dma_de.v,v 1.3 2002/02/01 01:54:45 rudi Exp $
//
//  $Date: 2002/02/01 01:54:45 $
//  $Revision: 1.3 $
//  $Author: rudi $
//  $Locker:  $
//  $State: Exp $
//
// Change History:
//               $Log: wb_dma_de.v,v $
//               Revision 1.3  2002/02/01 01:54:45  rudi
//
//               - Minor cleanup
//
//               Revision 1.2  2001/08/15 05:40:30  rudi
//
//               - Changed IO names to be more clear.
//               - Uniquifyed define names to be core specific.
//               - Added Section 3.10, describing DMA restart.
//
//               Revision 1.1  2001/07/29 08:57:02  rudi
//
//
//               1) Changed Directory Structure
//               2) Added restart signal (REST)
//
//               Revision 1.3  2001/06/13 02:26:48  rudi
//
//
//               Small changes after running lint.
//
//               Revision 1.2  2001/06/05 10:22:36  rudi
//
//
//               - Added Support of up to 31 channels
//               - Added support for 2,4 and 8 priority levels
//               - Now can have up to 31 channels
//               - Added many configuration items
//               - Changed reset to async
//
//               Revision 1.1.1.1  2001/03/19 13:10:44  rudi
//               Initial Release
//
//
//

`include "wb_dma_defines.v"

module wb_dma_de(clk, rst,

	// WISHBONE MASTER INTERFACE 0
	mast0_go, mast0_we, mast0_adr, mast0_din,
	mast0_dout, mast0_err, mast0_drdy, mast0_wait, 

	// WISHBONE MASTER INTERFACE 1
	mast1_go, mast1_we, mast1_adr, mast1_din,
	mast1_dout, mast1_err, mast1_drdy, mast1_wait,

	// DMA Engine Init & Setup
	de_start, nd, csr, pointer, pointer_s, txsz,
	adr0, adr1, am0, am1,

	// DMA Engine Register File Update Outputs
	de_csr_we, de_txsz_we, de_adr0_we, de_adr1_we, ptr_set,
	de_csr, de_txsz, de_adr0, de_adr1, de_fetch_descr,

	// DMA Engine Control Outputs
	next_ch, de_ack,

	// DMA Engine Status
	pause_req, paused,
	dma_abort, dma_busy, dma_err, dma_done, dma_done_all
	);

input		clk, rst;

// --------------------------------------
// WISHBONE MASTER INTERFACE 0

output		mast0_go;	// Perform a Master Cycle
output		mast0_we;	// Read/Write
output	[31:0]	mast0_adr;	// Address for the transfer
input	[31:0]	mast0_din;	// Internal Input Data
output	[31:0]	mast0_dout;	// Internal Output Data
input		mast0_err;	// Indicates an error has occurred
input		mast0_drdy;	// Indicated that either data is available
				// during a read, or that the master can accept
				// the next data during a write
output		mast0_wait;	// Tells the master to insert wait cycles
				// because data can not be accepted/provided

// --------------------------------------
// WISHBONE MASTER INTERFACE 1

output		mast1_go;	// Perform a Master Cycle
output		mast1_we;	// Read/Write
output	[31:0]	mast1_adr;	// Address for the transfer
input	[31:0]	mast1_din;	// Internal Input Data
output	[31:0]	mast1_dout;	// Internal Output Data
input		mast1_err;	// Indicates an error has occurred
input		mast1_drdy;	// Indicated that either data is available
				// during a read, or that the master can accept
				// the next data during a write
output		mast1_wait;	// Tells the master to insert wait cycles
				// because data can not be accepted/provided

// --------------------------------------
// DMA Engine Signals

// DMA Engine Init & Setup
input		de_start;	// Start DMA Engine Indicator
input		nd;		// Next Descriptor Indicator
input	[31:0]	csr;		// Selected Channel CSR
input	[31:0]	pointer;	// Linked List Descriptor pointer
input	[31:0]	pointer_s;	// Previous Pointer
input	[31:0]	txsz;		// Selected Channel Transfer Size
input	[31:0]	adr0, adr1;	// Selected Channel Addresses
input	[31:0]	am0, am1;	// Selected Channel Address Masks

// DMA Engine Register File Update Outputs
output		de_csr_we;	// Write enable for csr register
output		de_txsz_we;	// Write enable for txsz register
output		de_adr0_we;	// Write enable for adr0 register
output		de_adr1_we;	// Write enable for adr1 register
output		ptr_set;	// Set Pointer as Valid
output	[31:0]	de_csr;		// Write Data for CSR when loading External Desc.
output	[11:0]	de_txsz;	// Write back data for txsz register
output	[31:0]	de_adr0;	// Write back data for adr0 register
output	[31:0]	de_adr1;	// Write back data for adr1 register
output		de_fetch_descr;	// Indicates that we are fetching a descriptor

// DMA Engine Control Outputs
output		next_ch;	// Indicates the DMA Engine is done
output		de_ack;

// DMA Abort from RF (software forced abort)
input		dma_abort;

// DMA Engine Status
input		pause_req;
output		paused;
output		dma_busy, dma_err, dma_done, dma_done_all;

////////////////////////////////////////////////////////////////////
//
// Local Wires
//

parameter	[10:0]	// synopsys enum state
		IDLE		= 11'b000_0000_0001,
		READ		= 11'b000_0000_0010,
		WRITE		= 11'b000_0000_0100,
		UPDATE		= 11'b000_0000_1000,
		LD_DESC1	= 11'b000_0001_0000,
		LD_DESC2	= 11'b000_0010_0000,
		LD_DESC3	= 11'b000_0100_0000,
		LD_DESC4	= 11'b000_1000_0000,
		LD_DESC5	= 11'b001_0000_0000,
		WB		= 11'b010_0000_0000,
		PAUSE		= 11'b100_0000_0000;

reg	[10:0]	/* synopsys enum state */ state, next_state;
// synopsys state_vector state

reg	[31:0]	mast0_adr, mast1_adr;

reg	[29:0]	adr0_cnt, adr1_cnt;
wire	[29:0]	adr0_cnt_next, adr1_cnt_next;
wire	[29:0]	adr0_cnt_next1, adr1_cnt_next1;
reg		adr0_inc, adr1_inc;

reg	[8:0]	chunk_cnt;
reg		chunk_dec;

reg	[11:0]	tsz_cnt;
reg		tsz_dec;

reg		de_txsz_we;
reg		de_csr_we;
reg		de_adr0_we;
reg		de_adr1_we;
reg		ld_desc_sel;

wire		chunk_cnt_is_0_d;
reg		chunk_cnt_is_0_r;
wire		tsz_cnt_is_0_d;
reg		tsz_cnt_is_0_r;

reg		read, write;
reg		read_r, write_r;
wire		rd_ack, wr_ack;
reg		rd_ack_r;

reg		chunk_0;
wire		done;
reg		dma_done_d;
reg		dma_done_r;
reg		dma_abort_r;
reg		next_ch;
wire		read_hold, write_hold;
reg		write_hold_r;

reg	[1:0]	ptr_adr_low;
reg		m0_go;
reg		m0_we;
reg		ptr_set;

// Aliases
wire		a0_inc_en = csr[4];	// Source Address (Adr 0) increment enable
wire		a1_inc_en = csr[3];	// Dest. Address (Adr 1) increment enable
wire		ptr_valid = pointer[0];
wire		use_ed = csr[`WDMA_USE_ED];

reg		mast0_drdy_r;
reg		paused;

reg		de_fetch_descr;		// Indicates that we are fetching a descriptor
////////////////////////////////////////////////////////////////////
//
// Misc Logic
//

always @(posedge clk)
	dma_done_r <= #1 dma_done;

// Address Counter 0 (Source Address)
always @(posedge clk)
	if(de_start | ptr_set)		adr0_cnt <= #1 adr0[31:2];
	else
	if(adr0_inc & a0_inc_en)	adr0_cnt <= #1 adr0_cnt_next;

// 30 Bit Incrementor (registered)
wb_dma_inc30r u0(	.clk(	clk		),
			.in(	adr0_cnt	),
			.out(	adr0_cnt_next1 	)	);

assign adr0_cnt_next[1:0] = adr0_cnt_next1[1:0];
assign adr0_cnt_next[2] = am0[4] ? adr0_cnt_next1[2] : adr0_cnt[2];
assign adr0_cnt_next[3] = am0[5] ? adr0_cnt_next1[3] : adr0_cnt[3];
assign adr0_cnt_next[4] = am0[6] ? adr0_cnt_next1[4] : adr0_cnt[4];
assign adr0_cnt_next[5] = am0[7] ? adr0_cnt_next1[5] : adr0_cnt[5];
assign adr0_cnt_next[6] = am0[8] ? adr0_cnt_next1[6] : adr0_cnt[6];
assign adr0_cnt_next[7] = am0[9] ? adr0_cnt_next1[7] : adr0_cnt[7];
assign adr0_cnt_next[8] = am0[10] ? adr0_cnt_next1[8] : adr0_cnt[8];
assign adr0_cnt_next[9] = am0[11] ? adr0_cnt_next1[9] : adr0_cnt[9];
assign adr0_cnt_next[10] = am0[12] ? adr0_cnt_next1[10] : adr0_cnt[10];
assign adr0_cnt_next[11] = am0[13] ? adr0_cnt_next1[11] : adr0_cnt[11];
assign adr0_cnt_next[12] = am0[14] ? adr0_cnt_next1[12] : adr0_cnt[12];
assign adr0_cnt_next[13] = am0[15] ? adr0_cnt_next1[13] : adr0_cnt[13];
assign adr0_cnt_next[14] = am0[16] ? adr0_cnt_next1[14] : adr0_cnt[14];
assign adr0_cnt_next[15] = am0[17] ? adr0_cnt_next1[15] : adr0_cnt[15];
assign adr0_cnt_next[16] = am0[18] ? adr0_cnt_next1[16] : adr0_cnt[16];
assign adr0_cnt_next[17] = am0[19] ? adr0_cnt_next1[17] : adr0_cnt[17];
assign adr0_cnt_next[18] = am0[20] ? adr0_cnt_next1[18] : adr0_cnt[18];
assign adr0_cnt_next[19] = am0[21] ? adr0_cnt_next1[19] : adr0_cnt[19];
assign adr0_cnt_next[20] = am0[22] ? adr0_cnt_next1[20] : adr0_cnt[20];
assign adr0_cnt_next[21] = am0[23] ? adr0_cnt_next1[21] : adr0_cnt[21];
assign adr0_cnt_next[22] = am0[24] ? adr0_cnt_next1[22] : adr0_cnt[22];
assign adr0_cnt_next[23] = am0[25] ? adr0_cnt_next1[23] : adr0_cnt[23];
assign adr0_cnt_next[24] = am0[26] ? adr0_cnt_next1[24] : adr0_cnt[24];
assign adr0_cnt_next[25] = am0[27] ? adr0_cnt_next1[25] : adr0_cnt[25];
assign adr0_cnt_next[26] = am0[28] ? adr0_cnt_next1[26] : adr0_cnt[26];
assign adr0_cnt_next[27] = am0[29] ? adr0_cnt_next1[27] : adr0_cnt[27];
assign adr0_cnt_next[28] = am0[30] ? adr0_cnt_next1[28] : adr0_cnt[28];
assign adr0_cnt_next[29] = am0[31] ? adr0_cnt_next1[29] : adr0_cnt[29];


// Address Counter 1 (Destination Address)
always @(posedge clk)
	if(de_start | ptr_set)		adr1_cnt <= #1 adr1[31:2];
	else
	if(adr1_inc & a1_inc_en)	adr1_cnt <= #1 adr1_cnt_next;

// 30 Bit Incrementor (registered)
wb_dma_inc30r u1(	.clk(	clk		),
			.in(	adr1_cnt	),
			.out(	adr1_cnt_next1 	)	);