gui.plg

STM32+Grlib

JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled May 20 2010 17:07:46
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VE
VTarget = 3.222V
State of Pins: 
TCK: 1, TDI: 0, TDO: 0, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Full Chip Erase Done.
Programming Done.
Verify OK.
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...
Build target 'Target 1'
compiling system_stm32f10x.c...
compiling main.c...
User\main.c(239): warning:  #177-D: variable "RectFillStructure" was declared but never referenced
User\main.c:    tRectangle RectFillStructure;
User\main.c:               ^
User\main.c: User\main.c: 1 warning, 0 errors
linking...
GUI.axf: Error: L6218E: Undefined symbol g_sHello (referred from main.o).
GUI.axf: Error: L6218E: Undefined symbol g_sPushBtn (referred from main.o).
GUI.axf: Not enough information to list image symbols.
GUI.axf: Finished: 1 information, 0 warning and 2 error messages.
Target not created
Build target 'Target 1'
compiling system_stm32f10x.c...
compiling main.c...
User\main.c(239): warning:  #177-D: variable "RectFillStructure" was declared but never referenced
User\main.c:    tRectangle RectFillStructure;
User\main.c:               ^
User\main.c: User\main.c: 1 warning, 0 errors
linking...
GUI.axf: Error: L6218E: Undefined symbol g_sHello (referred from main.o).
GUI.axf: Error: L6218E: Undefined symbol g_sPushBtn (referred from main.o).
GUI.axf: Not enough information to list image symbols.
GUI.axf: Finished: 1 information, 0 warning and 2 error messages.
Target not created
Build target 'Target 1'
compiling system_stm32f10x.c...
compiling main.c...
User\main.c(141): error:  #20: identifier "g_sPushBtn" is undefined
User\main.c:           WidgetAdd((tWidget *)&g_sPushBtn, (tWidget *)&g_sHello);
User\main.c:                                 ^
User\main.c(141): error:  #20: identifier "g_sHello" is undefined
User\main.c:           WidgetAdd((tWidget *)&g_sPushBtn, (tWidget *)&g_sHello);
User\main.c:                                                         ^
User\main.c(147): error:  #20: identifier "g_sHello" is undefined
User\main.c:           WidgetRemove((tWidget *)&g_sHello);
User\main.c:                                    ^
User\main.c(148): error:  #20: identifier "g_sPushBtn" is undefined
User\main.c:           PushButtonTextSet(&g_sPushBtn, "Show Welcome");
User\main.c:           ^
User\main.c(235): warning:  #177-D: variable "RectFillStructure" was declared but never referenced
User\main.c:    tRectangle RectFillStructure;
User\main.c:               ^
User\main.c: User\main.c: 1 warning, 4 errors
Target not created
Build target 'Target 1'
compiling system_stm32f10x.c...
compiling main.c...
User\main.c(216): warning:  #177-D: variable "RectFillStructure" was declared but never referenced
User\main.c:    tRectangle RectFillStructure;
User\main.c:               ^
User\main.c: User\main.c: 1 warning, 0 errors
linking...
Program Size: Code=15440 RO-data=5544 RW-data=728 ZI-data=1448  
"GUI.axf" - 0 Error(s), 1 Warning(s).
Load "F:\\STM32gui\\STM GUI mdkPJT\\GUI.AXF" 
Set JLink Project File to "F:\STM32gui\STM GUI mdkPJT\JLinkSettings.ini"
 
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled May 20 2010 17:07:46
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VE
VTarget = 3.215V
State of Pins: 
TCK: 1, TDI: 0, TDO: 0, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Full Chip Erase Done.
Programming Done.
Verify OK.
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...
Clean started: Project: 'GUI'
   deleting intermediate output files for target 'Target 1'
Build target 'Target 1'
compiling core_cm3.c...
compiling system_stm32f10x.c...
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h(23): error:  #256: invalid redeclaration of type name "s32" (declared at line 487 of "..\STMGUI\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h")
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:   typedef signed long  s32;
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:                        ^
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h(27): error:  #256: invalid redeclaration of type name "sc32" (declared at line 491 of "..\STMGUI\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h")
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:   typedef signed long  const sc32;  /* Read Only */
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:                              ^
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h(31): error:  #256: invalid redeclaration of type name "vs32" (declared at line 495 of "..\STMGUI\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h")
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:   typedef volatile signed long  vs32;
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:                                 ^
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h(35): error:  #256: invalid redeclaration of type name "vsc32" (declared at line 499 of "..\STMGUI\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h")
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:   typedef volatile signed long  const vsc32;  /* Read Only */
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:                                       ^
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h(39): error:  #256: invalid redeclaration of type name "u32" (declared at line 503 of "..\STMGUI\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h")
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:   typedef unsigned long  u32;
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:                          ^
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h(43): error:  #256: invalid redeclaration of type name "uc32" (declared at line 507 of "..\STMGUI\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h")
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:   typedef unsigned long  const uc32;  /* Read Only */
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:                                ^
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h(47): error:  #256: invalid redeclaration of type name "vu32" (declared at line 511 of "..\STMGUI\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h")
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:   typedef volatile unsigned long  vu32;
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:                                   ^
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h(51): error:  #256: invalid redeclaration of type name "vuc32" (declared at line 515 of "..\STMGUI\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h")
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:   typedef volatile unsigned long  const vuc32;  /* Read Only */
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:                                         ^
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h(57): error:  #101: "RESET" has already been declared in the current scope
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:   typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus;
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h:                 ^
d:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h(57): error:  #101: "SET" has already been declared in the current scope