⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 cplay.c

📁 speech signal process tools
💻 C
字号:
/*  This material contains proprietary software of Entropic Speech, Inc.     Any reproduction, distribution, or publication without the the prior	     written permission of Entropic Speech, Inc. is strictly prohibited.  Any public distribution of copies of this work authorized in writing by  Entropic Speech, Inc. must bear the notice			 								               "Copyright 1986,1987 Entropic Speech, Inc." 				 	 									      Joseph T. Buck, Entropic Processing, Inc.				     Modified by Alan Parker to use DACP on Masscomp at WRL 2/13/86 Modified for ESPS by Alan Parker, Entropic Speech, Inc. Modified by Joe Buck to play previous file while reading next one. Modified by Dale Lancaster, Convex Computer Corp to run on Convex Machines. This program is used to play a SD file on the Masscomp D/A.  													 Syntax: mcplay [options] file		   Options:				-x debug_level		-g gain			gain is a floating value. The file is multiplied by this    		value to form the output data.	-p range							  		range is a range of points. Only those points are played 		the first point is 1						-f range								range is a range of frames (default frame size = 100)			the first frame is 1					-w width							changes the frame size			-s range					range is a range of seconds. For LISTEN compatibility, the		first second is zero					 	-r repeats									number of repetitions					-c chan								channel number				#ifdef CONVEX	-k clock		D/A clock number#endif CONVEX	-i		Clip samples	-h hist-file		Specify alternate history file.	-b		bits to shift input data to form output data		postive means right shift, negative means left shift*/#ifndef lint	static char *sccs_id = "%W% %G%	ESI";#endif/* **************** check these defaults ********************** */#ifdef  CONVEX#define DADEV "/dev/ad0"#define DA0DEV "/dev/ad0"   /* Play to DA port 0 on RTI */#define DA1DEV "/dev/ad1"   /* Play to DA port 1 on RTI */#define DATYPE "RTI-732"#else#define DADEV "/dev/dacp0/daf0"		/* default d to a device */#endif#define CLKDEV "/dev/dacp0/efclk"	/* default clock device */#define CLKDEFAULT	0		/* default clock number */#ifndef MAXDA#define MAXDA 2048		/* max value of this D/A (12 bit) */#endif/* ************************************************************ */#define NUM_BUFS 1#define DUTY 50			/* duty cycle of clock */#include <stdio.h>#ifdef CONVEX#include <sys/types.h>#include <sys/file.h>#include <sys/ioctl.h>#include </sys/dev_iop/adcommon.h>extern int errno ;#endif/* include ESPS header files */#include <esps/esps.h>			/* main header stuff */#include <esps/sd.h>			/* SD file stuff */#include <esps/unix.h>			/* Unix function declarations */#ifdef CONVEX#define SYNTAX USAGE \("play [-[spf] range] [-w fsiz] [-c chan] [-r nrpt] [-g gain] [-i] [-h hist-file] [-x debug-level] [-R sample-rate] file ...");#else#define SYNTAX USAGE \("play [-[spf] range] [-w fsiz] [-c chan] [-k clock] [-r nrpt] [-g gain] [-i] [-h hist-file] [-x debug-level] file ...");#endif/* Globals */int     debug_level = 0;/* Externals */void lrange_switch();extern  int optind;extern  char *optarg;double	atof();int     mropen(),  mrclktrig();char    *getsym_s();void    dac_error();char	*eopen();main (argc, argv)int argc;char **argv;{#ifdef CONVEX    int ioctl_data ;    int sam_rate ;#endif    int     c, i;    int     nrep = 1, channel = 0;    char    *p_switch = NULL, *s_switch = NULL, *f_switch = NULL;    FILE    *istrm, *hfile;    char    *hist = "play.his";    struct  header  *ih;    long    start_p = 1, end_p, start_s, end_s, start_f, end_f;    int     isf, np=0, fwidth = 100, gflag = 0;    int	    bflag=0, bits, left, right;    int     nptot = 0, clk = CLKDEFAULT, nofile=0;    int     max = 0, clip = 0, iflag = 0;    float   *dataf;    short   *data = NULL;    int     argind, devpn = -1, clkpn = -1, write_hfile=0;    double  retwidth, retfreq, clk_width, gain=1;    char    dadev[30], clkdev[30], *filename=NULL, *firstfile;    int     filecount=0;    int	    in_progress = 0, prev_np = 0;    (void)sprintf(dadev,DADEV); #ifndef CONVEX    (void)sprintf(clkdev,"%s%d",CLKDEV,clk);#endif    while ((c = getopt (argc, argv, "p:s:r:c:k:w:f:g:x:ih:b:C:D:R:")) != EOF) {	switch (c) {	    case 'x':		debug_level = atoi (optarg);		break;	    case 'g':	        gflag++;		gain = atof (optarg);		break;	    case 'c':     		channel = atoi (optarg);#ifdef CONVEX	        /* Use DA0 or DA1 ?  */	        if (channel == 0)		     strcpy(dadev,DA0DEV) ;	        else strcpy(dadev,DA1DEV) ;#endif		break;	    case 'r': 		nrep = atoi (optarg);		break;	    case 'p': 		p_switch = optarg;		break;	    case 'f':		f_switch = optarg;		break;	    case 'w':		fwidth = atoi (optarg);		break;	    case 's': 		s_switch = optarg;		break;#ifndef CONVEX	    case 'k':		(void)sprintf(clkdev, "%s%s", CLKDEV, optarg);		break;#endif	    case 'i':		iflag++;		break;	    case 'h':		hist = optarg;		break;	    case 'b':		bflag++;		bits = atoi(optarg);		break;	    case 'C':		(void)strncpy(clkdev,optarg,sizeof clkdev);		break;	    case 'D':		(void)strncpy(dadev,optarg,sizeof dadev);		break;#ifdef CONVEX	    case 'R':		sam_rate = atoi(optarg) ;		break ;#endif	    default: 		SYNTAX;	}    }    if (bflag && gflag) {	Fprintf(stderr,"play: can't use both -b and -g\n");	exit(1);    }    if (bflag)      if (bits < 0) left = bits*-1;	else right = bits;    if (optind >= argc)      nofile = 1;    else      filename = argv[optind];    (void)read_params(NULL,SC_CHECK_FILE,filename);    if (nofile) {      if(symtype("filename") == ST_UNDEF) {	Fprintf(stderr,"play: no input file\n");	SYNTAX;      }      filename = getsym_s("filename");    }    firstfile = filename;    if ((hfile = fopen(hist,"w")) == NULL) {	Fprintf(stderr,"play: warning can't open hist file.\n"); 	hfile = stderr;    }#ifdef CONVEX    if(debug_level) Fprintf(stderr,"play: %s, d/a: %s\n",dadev);#else    if(debug_level) Fprintf(stderr,"play: clk: %s, d/a: %s\n",clkdev,dadev);#endif    argind = optind;    while (nrep > 0) {    optind = argind;    while (optind < argc || nofile) {	filecount++;	if (!nofile) filename = argv[optind];/* open the input file */	filename = eopen("play", filename, "r", FT_SD, NONE, &ih, &istrm);/* if input is a pipe (ndrec is -1) then assume 40000 points of data */	if (ih->common.ndrec == -1)	   ih->common.ndrec = 40000;	end_p = ih -> common.ndrec;	isf = ih -> hd.sd->sf;	start_s = (start_p - 1) / isf;	end_s = (end_p + isf - 1) / isf;	start_f = (start_p - 1) / fwidth + 1;	end_f = (end_p + fwidth - 1) / fwidth;	if(symtype("start") != ST_UNDEF)	   start_p = getsym_i("start");	if(symtype("nan") != ST_UNDEF)	   end_p = start_p + getsym_i("nan") -  1;	if (p_switch)	  lrange_switch (p_switch, &start_p, &end_p, 1);	 else if (s_switch) {	   lrange_switch (s_switch, &start_s, &end_s, 1);	   start_p = start_s * isf + 1;	   end_p = end_s * isf;	   if (end_p <= start_p) end_p += isf;	 }	 else if (f_switch) {	   lrange_switch (f_switch, &start_f, &end_f, 1);	   start_p = (start_f - 1) * fwidth + 1;	   end_p = end_f * fwidth;	 }	np = end_p - start_p + 1;	if(start_p > ih->common.ndrec) {	  Fprintf (stderr, "play: start point (%ld) > number of points (%ld)\n",	  		start_p, ih -> common.ndrec);	  exit(1);	}	if (start_p > end_p) {	  Fprintf (stderr, "play: start point (%ld) > end point (%ld)\n",		   start_p, end_p);	  exit (1);	}	if (end_p > ih -> common.ndrec) {	  Fprintf (stderr, "play: end point (%ld) > number of points (%ld)",		   end_p, ih->common.ndrec);	  Fprintf (stderr, "play: end point reset to last point.\n");	  end_p = ih->common.ndrec;	}	Fprintf(stderr,"play: range (points) %ld:%ld, filename: %s\n",	 start_p,np,filename);		skiprec (istrm, start_p - 1, size_rec (ih));#ifndef CONVEX	clk_width = (double)((1.06e6/isf)*(DUTY/100.0));#endif	if(debug_level) Fprintf(stderr,"play: np: %ld\n",np);	if((dataf = (float *)malloc((unsigned)np * sizeof FLOAT)) == NULL) {	    Fprintf(stderr,"Cannot alloc %ld floats\n",np);	    exit(1);	}	if ((ih->hd.sd->max_value == 0) && iflag) {	    clip++; write_hfile=1;	    Fprintf(hfile,             "Samples greater than %d will be clipped to this value\n",	      MAXDA);	    Fprintf(hfile,"Sample\toriginal value\n");	}	if (!gflag && !bflag && (ih->hd.sd->max_value > MAXDA)) {	    gflag++;  write_hfile=1;	    gain = (float)MAXDA/ih->hd.sd->max_value;	    Fprintf(hfile,"hd.sd->max_value: %g\n",ih->hd.sd->max_value);	    Fprintf(hfile,"This D/A MAXDA is %d\n",MAXDA);	    Fprintf(hfile,"Data scaled by %g\n",gain);	    Fprintf(stderr,"play: Data scaled by %g\n",gain);	}	if ((i = get_sd_recf(dataf,np,ih,istrm)) != np) {	    if (i == 0) {		Fprintf (stderr, "play: %s is empty!\n");		exit (1);	    }	    else {		Fprintf (stderr, "play: only %d points in %s\n", i, filename);		np = i;	    }	}	(void) fclose (istrm);	if (clip) for (i=0; i<np; i++) {	    int j = abs((int)dataf[i]);	    if (j > MAXDA) {		Fprintf(hfile, "%d\t%d\n", i+2,j);		if(j > max) max = j;		if(dataf[i] < 0) dataf[i] = -MAXDA;		 else dataf[i] = MAXDA;	    }	}#ifndef CONVEX/* Wait for previous play to complete.  Then allocate old array. */	if (in_progress) {	    wait_for_end(devpn,(int)(2000.0*prev_np/isf),data);	    Fprintf(stderr,"previous transfer complete\n");	}	prev_np = np;/* Re-open D/A */	if(mropen(&devpn,dadev,0) == -1) {	    Fprintf(stderr,"Can't open D/A %s\n",dadev);	    exit(1);        }	if(mropen(&clkpn,clkdev,0) == -1) {	    Fprintf(stderr,"Can't open clock %s\n",clkdev);	    exit(1);	}	if(mrclk1(clkpn,0,(double)isf,&retfreq,0,clk_width,&retwidth,0) != 0)    	 dac_error();	if(mrclktrig(devpn,1,clkpn) != 0) dac_error();#else#ifdef CONVEX    devpn = open (dadev, O_RDWR); #endif    if (debug_level > 0) {	Fprintf (stderr,"%s opened, pathno = %d, errno = %d\n", 		 dadev, devpn,errno);    }    /* Make sure that the "software clock" is set to the proper value */    ioctl_data = DEFAULT_DELAY ;    ioctl(devpn,ADSETDELAY,&ioctl_data) ;#endif/* Allocate short buffer */	if((data = (short *)malloc((unsigned)np*sizeof SHORT)) == NULL) {	    Fprintf(stderr,"Cannot alloc %ld shorts\n",np);	    exit(1);	}/* either, 1) multiply sample by gain factor (slow), 2) shift sample   bits to right (faster), or 3) just copy sample (fastest) */	if (gflag) for (i=0; i<np; i++) data[i] = dataf[i]*gain;	 else 	  if (bflag && left) 	   for (i=0; i<np; i++) data[i] = (int)dataf[i] << left;	    else	     if (bflag && right)	      for (i=0; i<np; i++) data[i] = (int)dataf[i] >> right;	       else	    	for (i=0; i<np; i++) data[i] = dataf[i];#ifdef CONVEX    if (debug_level) {	/* Turn on level 1 debug messages inside ad driver */	ioctl_data = 1 ;	ioctl(devpn,ADDEBUG,&ioctl_data) ;    } ;	ioctl_data = gain ;    ioctl(devpn,ADSETGAIN,&ioctl_data) ;	ioctl_data = sam_rate ;    ioctl(devpn,ADSETHZ,&ioctl_data) ;    /* Adjust the data by shifting it 4 bits left */    if (strcmp(DATYPE,"RTI-732") == 0) {	int i ;	fprintf(stderr,"adjusting data...%d\n",np) ;	for (i=0; i < np; i++)	    data[i] = data[i] << 4 ;    }    write(devpn,data,np*2) ;    close(devpn) ;#else	(void)mrdaxout(devpn,clkpn,clkpn,channel,1,1,np,data,0);        Fprintf(stderr,"play: Transfer started\n");#endif        (void) free((char *)dataf);	in_progress = 1;        nptot += np;	if(nofile) break;        optind++;    }    nrep--;    }#ifndef CONVEX    wait_for_end(devpn,(np/isf)*2000,data);#endif    Fprintf (stderr, "play: final transfer complete\n");/* write common file, unless the input was from a pipe or there   was more than one input file*/    if(filecount == 1 && strcmp(filename, "<stdin>") != 0) {    	(void) putsym_i("start",(int)start_p);    	(void) putsym_i("nan",(int)np);    	(void) putsym_s("filename",firstfile);    	(void) putsym_s("prog","play");    }    if(debug_level) Fprintf(stderr,"play: Total points output: %ld\n",nptot);    if(clip && max) Fprintf(hfile,"To avoid clipping use a gain of %g.\n",	(float)MAXDA/(float)abs(max));    if(clip && max && (hfile != stderr)) 	Fprintf(stderr,"play: To avoid clipping use a gain of %g.\n",	(float)MAXDA/(float)abs(max));    (void) fclose(hfile);     if(!write_hfile && (hfile != stderr)) (void)unlink(hist);    return 0;}void dac_error(){    Fprintf(stderr,"Error on dacp call.\n");    exit(1);}wait_for_end (devpn,arg_wt,data)int devpn, arg_wt;short *data;{#ifndef CONVEX    (void) mrevwt(devpn,0,arg_wt);    if (data != NULL)	(void) free((char *)data);    if(mrclosall() != 0) {	Fprintf (stderr, "Error from mrclosall call.\n");	exit (1);    }#endif}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -