ariel.me

speech signal process tools

.lo
.ce 2
.b
README FIRST
1.1 5/25/90
.pp
The device driver kit for the Ariel AT board is provided in two forms.
The first is the standard distribution, uncompiled, on a 3.5 inch
diskette.  The other form, is the compiled version which is in the ESPS
directory on the tape.  Use the compiled one in the ESPS directory.  The
original version is supplied just in case you have difficulty getting
things going.
.pp
Read in the ESPS/waves+ tape as described in the enclosed instructions.
If you have the Ariel DSP32 board, then it should be installed into the
computer by now.    If the board is installed, then you should try
loading the device driver.   Just go into \fI/files/esps/driver\fR and
run \fBmake load\fR as super-user.   If the board is installed
correctly, then the driver should load.   There is a diagnostic program
in this directory, called \fIdrivetest\fR that you should look at.  It
is described in the enclosed driver manual.
.pp
After you determine that everything is OK, you should put the load
statement into your startup file, so that the driver gets loaded each
time you boot your machine.