📄 cn_r2_i.cdp
字号:
COUNTRY DEPENDANT PARAMETER FILE
China R2 inbound protocol
File format:
- Lines not starting with a $, @, or % are ignored
- (@ and % symbols are reserved)
- The number following the $ sign is the parameter number
- All unspecified parameters are assumed to be 0
-
@0 : "CN_R2_I.LOD"
$6 timeout for incoming calls (seconds) : 6
$7 local number size, excluding repeated P or R digit (inbound): 4
Possible values for various sequence:
1XY: 3, ABCD: 4, (Kc)QABCD: 5, (Kc)PQABCD: 6, [Kc|P]PQABCD: 6,
(Kc)RPQABCD: 7, [Kc|R]RPQABCD: 7
$8 maximum calling party size, should be larger than 7 (inbound) : 10
$9 Number of rings before speech (inbound) : 1
$10 wait for idle (seconds) : 10
$16 ANI supported (inbound) (1=YES, 0=NO) : 1
$17 if set then when receiving a forward disconnect first : 20
send a backward clear DTI DISCONNECT pattern for length
of time this value is set for (55 msec)
$32 number of DDI digits to collect before collecting ANI (inbound) : 0
0=after all DDI digits, 1=after 1 DDI digit, -1=after all DDI but one.
$45 RXTXIDLE setting for the waitcall function only used : "0x0D0D"
if icapi.cfg parameter 14 is set for using waitcall. The upper byte
represents the receive signaling pattern and the lower byte
represents the transmit signaling pattern. Used set the receive
and transmit idle patterns that must be present prior to waiting
for a seizure. See CDP parameter 48 for the seizure and seizure response
patterns.
$46 area code size excluding leading '0' (0=no area code)(inbound) : 0
$47 Chinese protocol bit mask (inbound) : 0
Set the following bits to 1 to enable their functions:
Bit 0: A3 must always be sent in pulse form (200ms)
Bit 1: detect service calls ("1XY" instead of "(R)PQABCD")
Bit 2: accept KC as first local phone number digit "(KC)(R)PQABCD"
Bit 3: accept KE as first local phone number digit "(KE)(R)PQABCD"
Bit 4: first local phone number digit is repeated "[KC|P]PQABCD" or
"[KC|R]RPQABCD" (not compatible with Bit 2 & 3
Bit 5: skip initial 0 before area code if any "(0)X1X2..."
$48 SEIZESIG setting for the waitcall function only used : "0x0C0F"
if icapi.cfg parameter 14 is set for using waitcall. The upper byte
represents the receive signaling pattern and the lower byte
represents the transmit signaling pattern. Used set the receive
seizure pattern and transmit seizure acknowledge pattern used
by waitcall. See CDP parameter 45 for the idle patterns.
$50 bits set and cleared for NT BLOCKING : "-1--"
ABCD ('-'=don't care)
$51 bits set and cleared for NT IDLE : "10--"
ABCD ('-'=don't care)
$52 bits set and cleared for NT SEIZURE : "00--"
ABCD ('-'=don't care)
$53 bits set and cleared for NT DISCONNECT : "11--"
ABCD ('-'=don't care)
$54 bits set and cleared for NT ACKNOWLEDGE: "11--"
ABCD ('-'=don't care)
$55 bits set and cleared for NT ANSWER : "01--"
ABCD ('-'=don't care)
$56 bits set and cleared for NT BAD CODE : "-0--"
ABCD ('-'=don't care)
$57 bits set and cleared for NT FORCED RELEASE:"00--""
ABCD ('-'=don't care)
@50 bits set and cleared for DTI BLOCKING : "1111"
ABCD ('-'=don't modify)
@51 bits set and cleared for DTI IDLE : "10--"
ABCD ('-'=don't modify)
@52 bits set and cleared for DTI SEIZURE : "0---"
ABCD ('-'=don't modify)
@53 bits set and cleared for DTI DISCONNECT : "1---"
ABCD ('-'=don't modify)
@54 bits set and cleared for DTI ACKNOWLEDGE: "-1--"
ABCD ('-'=don't modify)
@55 bits set and cleared for DTI ANSWER : "0---"
ABCD ('-'=don't modify)
@56 bits set and cleared for DTI START : "1111"
ABCD ('-'=don't modify)
CENTRAL OFFICE TONE INFORMATION
*****************************************
Tone description:
freq.1 (Hz) deviation freq.2 deviation
(if any)
Cadence description:
on-time deviation off-time deviation
(0 if continous)
******************************
* TNG # 103 BUSY *
******************************
@103 BUSY : 450 -12
%01 cadence : 50 50
******************************
* TNG # 105 RINGBACK *
******************************
@105 RINGBACK : 450 -12
%01 cadence : 100 400
;$100 set: 1
;%01 q_nfrm : 2
;%02 q_snr0 : 1
;%03 q_snr1 : 1
;%04 q_b0 : 1
;%05 q_b1 : 1
;%10 q_minfrm : 2
******************************
* TID # 497 I1 *
******************************
;$497 TN_I1 : 1380 35 1500 35
;%01 cadence (10ms unit) : 0
******************************
* TID # 498 I2 *
******************************
;$498 TN_I2 : 1380 35 1620 35
;%01 cadence : 0
******************************
* TID # 499 I3 *
******************************
;$499 TN_I3 : 1500 35 1620 35
;%01 cadence : 0
******************************
* TID # 500 I4 *
******************************
;$500 TN_I4 : 1380 35 1740 35
;%01 cadence : 0
******************************
* TID # 501 I5 *
******************************
;$501 TN_I5 : 1500 35 1740 35
;%01 cadence : 0
******************************
* TID # 502 I6 *
******************************
;$502 TN_I6 : 1620 35 1740 35
;%01 cadence : 0
******************************
* TID # 503 I7 *
******************************
;$503 TN_I7 : 1380 35 1860 35
;%01 cadence : 0
******************************
* TID # 504 I8 *
******************************
;$504 TN_I8 : 1500 35 1860 35
;%01 cadence : 0
******************************
* TID # 505 I9 *
******************************
;$505 TN_I9 : 1620 35 1860 35
;%01 cadence : 0
******************************
* TID # 506 I10 *
******************************
;$506 TN_I10 : 1740 35 1860 35
;%01 cadence : 0
******************************
* TID # 507 I11 *
******************************
;$507 TN_I11 : 1380 35 1980 35
;%01 cadence : 0
******************************
* TID # 508 I12 *
******************************
;$508 TN_I12 : 1500 35 1980 35
;%01 cadence : 0
******************************
* TID # 509 I13 *
******************************
;$509 TN_I13 : 1620 35 1980 35
;%01 cadence : 0
******************************
* TID # 510 I14 *
******************************
;$510 TN_I14 : 1740 35 1980 35
;%01 cadence : 0
******************************
* TID # 511 I15 *
******************************
;$511 TN_I15 : 1860 35 1980 35
;%01 cadence : 0
******************************
* TNG # 433 A1 *
******************************
@433 A1 : 1020 -12 1140 -12
%01 cadence : 0
******************************
* TNG # 434 A2 *
******************************
@434 A2 : 900 -12 1140 -12
%01 cadence : 0
******************************
* TNG # 435 A3 *
******************************
@435 A3 : 900 -12 1020 -12
%01 cadence : 0
******************************
* TNG # 436 A4 *
******************************
@436 A4 : 780 -12 1140 -12
%01 cadence : 0
******************************
* TNG # 437 A5 *
******************************
@437 A5 : 780 -12 1020 -12
%01 cadence : 0
******************************
* TNG # 438 A6 *
******************************
@438 A6 : 780 -12 900 -12
%01 cadence : 0
******************************
* TNG # 439 A7 *
******************************
@439 A7 : 660 -12 1140 -12
%01 cadence : 0
******************************
* TNG # 441 A9 *
******************************
@441 A9 : 660 -8 900 -8
%01 cadence : 0
******************************
* TNG # 451 A3 pulse *
******************************
@451 A3P : 900 -12 1020 -12
%01 cadence : 15
******************************
* TNG # 452 A4 pulse *
******************************
@452 A4P : 780 -12 1140 -12
%01 cadence : 15
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -