📄 stm3210c_eval_lcd.h
字号:
/**
******************************************************************************
* @file stm3210c_eval_lcd.h
* @author MCD Application Team
* @version V4.2.0
* @date 04/16/2010
* @brief This file contains all the functions prototypes for the lcd firmware driver.
* @updata www.armjishu.com Team
*****************************************************************************/
#ifndef __STM3210C_EVAL_LCD_H
#define __STM3210C_EVAL_LCD_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32f10x.h"
#include "fonts.h"
#define Lcd_Light_ON
#define Lcd_Light_OFF
#define SetCs GPIO_SetBits(LCD_PORT_CS, LCD_Pin_CS);
#define ClrCs GPIO_ResetBits(LCD_PORT_CS, LCD_Pin_CS);
#define SetWr GPIO_SetBits(LCD_PORT_WR, LCD_Pin_WR);
#define ClrWr GPIO_ResetBits(LCD_PORT_WR, LCD_Pin_WR);
#define SetRs GPIO_SetBits(LCD_PORT_RS, LCD_Pin_RS);
#define ClrRs GPIO_ResetBits(LCD_PORT_RS, LCD_Pin_RS);
#define SetRd GPIO_SetBits(LCD_PORT_RD, LCD_Pin_RD);
#define ClrRd GPIO_ResetBits(LCD_PORT_RD, LCD_Pin_RD);
#define LCD_Write(LCD_DATA) GPIO_Write(GPIOE, LCD_DATA)
#define LCD_Read() GPIO_ReadInputData(GPIOE)
//LCD Control pins ( 神舟IV号 )
#define LCD_Pin_WR GPIO_Pin_14
#define LCD_PORT_WR GPIOB
#define LCD_CLK_WR RCC_APB2Periph_GPIOB
#define LCD_Pin_CS GPIO_Pin_8
#define LCD_PORT_CS GPIOC
#define LCD_CLK_CS RCC_APB2Periph_GPIOC
#define LCD_Pin_RS GPIO_Pin_13
#define LCD_PORT_RS GPIOD
#define LCD_CLK_RS RCC_APB2Periph_GPIOD
#define LCD_Pin_RD GPIO_Pin_15
#define LCD_PORT_RD GPIOD
#define LCD_CLK_RD RCC_APB2Periph_GPIOD
//TM3210C_EVAL_LCD_Exported_Types
typedef struct
{
int16_t X;
int16_t Y;
} Point, * pPoint;
/**
* @brief Uncomment the line below if you want to use LCD_DrawBMP function to
* display a bitmap picture on the LCD. This function assumes that the bitmap
* file is loaded in the SPI Flash (mounted on STM3210C-EVAL board), however
* user can tailor it according to his application hardware requirement.
*/
/*#define USE_LCD_DrawBMP*/
/**
* @brief Uncomment the line below if you want to use user defined Delay function
* (for precise timing), otherwise default _delay_ function defined within
* this driver is used (less precise timing).
*/
/* #define USE_Delay */
#ifdef USE_Delay
#include "main.h"
#define _delay_ Delay /* !< User can provide more timing precise _delay_ function
(with 10ms time base), using SysTick for example */
#else
#define _delay_ delay /* !< Default _delay_ function with less precise timing */
#endif
#if 0
//LCD Control pins
#define LCD_NCS_PIN GPIO_Pin_2
#define LCD_NCS_GPIO_PORT GPIOB
#define LCD_NCS_GPIO_CLK RCC_APB2Periph_GPIOB
//LCD SPI Interface pins
#define LCD_SPI SPI3
#define LCD_SPI_CLK RCC_APB1Periph_SPI3
#define LCD_SPI_SCK_PIN GPIO_Pin_10
#define LCD_SPI_SCK_GPIO_PORT GPIOC
#define LCD_SPI_SCK_GPIO_CLK RCC_APB2Periph_GPIOC
#define LCD_SPI_MISO_PIN GPIO_Pin_11
#define LCD_SPI_MISO_GPIO_PORT GPIOC
#define LCD_SPI_MISO_GPIO_CLK RCC_APB2Periph_GPIOC
#define LCD_SPI_MOSI_PIN GPIO_Pin_12
#define LCD_SPI_MOSI_GPIO_PORT GPIOC
#define LCD_SPI_MOSI_GPIO_CLK RCC_APB2Periph_GPIOC
#endif
//LCD Registers
#define LCD_REG_0 0x00
#define LCD_REG_1 0x01
#define LCD_REG_2 0x02
#define LCD_REG_3 0x03
#define LCD_REG_4 0x04
#define LCD_REG_5 0x05
#define LCD_REG_6 0x06
#define LCD_REG_7 0x07
#define LCD_REG_8 0x08
#define LCD_REG_9 0x09
#define LCD_REG_10 0x0A
#define LCD_REG_12 0x0C
#define LCD_REG_13 0x0D
#define LCD_REG_14 0x0E
#define LCD_REG_15 0x0F
#define LCD_REG_16 0x10
#define LCD_REG_17 0x11
#define LCD_REG_18 0x12
#define LCD_REG_19 0x13
#define LCD_REG_20 0x14
#define LCD_REG_21 0x15
#define LCD_REG_22 0x16
#define LCD_REG_23 0x17
#define LCD_REG_24 0x18
#define LCD_REG_25 0x19
#define LCD_REG_26 0x1A
#define LCD_REG_27 0x1B
#define LCD_REG_28 0x1C
#define LCD_REG_29 0x1D
#define LCD_REG_30 0x1E
#define LCD_REG_31 0x1F
#define LCD_REG_32 0x20
#define LCD_REG_33 0x21
#define LCD_REG_34 0x22
#define LCD_REG_36 0x24
#define LCD_REG_37 0x25
#define LCD_REG_40 0x28
#define LCD_REG_41 0x29
#define LCD_REG_43 0x2B
#define LCD_REG_45 0x2D
#define LCD_REG_48 0x30
#define LCD_REG_49 0x31
#define LCD_REG_50 0x32
#define LCD_REG_51 0x33
#define LCD_REG_52 0x34
#define LCD_REG_53 0x35
#define LCD_REG_54 0x36
#define LCD_REG_55 0x37
#define LCD_REG_56 0x38
#define LCD_REG_57 0x39
#define LCD_REG_59 0x3B
#define LCD_REG_60 0x3C
#define LCD_REG_61 0x3D
#define LCD_REG_62 0x3E
#define LCD_REG_63 0x3F
#define LCD_REG_64 0x40
#define LCD_REG_65 0x41
#define LCD_REG_66 0x42
#define LCD_REG_67 0x43
#define LCD_REG_68 0x44
#define LCD_REG_69 0x45
#define LCD_REG_70 0x46
#define LCD_REG_71 0x47
#define LCD_REG_72 0x48
#define LCD_REG_73 0x49
#define LCD_REG_74 0x4A
#define LCD_REG_75 0x4B
#define LCD_REG_76 0x4C
#define LCD_REG_77 0x4D
#define LCD_REG_78 0x4E
#define LCD_REG_79 0x4F
#define LCD_REG_80 0x50
#define LCD_REG_81 0x51
#define LCD_REG_82 0x52
#define LCD_REG_83 0x53
#define LCD_REG_96 0x60
#define LCD_REG_97 0x61
#define LCD_REG_106 0x6A
#define LCD_REG_118 0x76
#define LCD_REG_128 0x80
#define LCD_REG_129 0x81
#define LCD_REG_130 0x82
#define LCD_REG_131 0x83
#define LCD_REG_132 0x84
#define LCD_REG_133 0x85
#define LCD_REG_134 0x86
#define LCD_REG_135 0x87
#define LCD_REG_136 0x88
#define LCD_REG_137 0x89
#define LCD_REG_139 0x8B
#define LCD_REG_140 0x8C
#define LCD_REG_141 0x8D
#define LCD_REG_143 0x8F
#define LCD_REG_144 0x90
#define LCD_REG_145 0x91
#define LCD_REG_146 0x92
#define LCD_REG_147 0x93
#define LCD_REG_148 0x94
#define LCD_REG_149 0x95
#define LCD_REG_150 0x96
#define LCD_REG_151 0x97
#define LCD_REG_152 0x98
#define LCD_REG_153 0x99
#define LCD_REG_154 0x9A
#define LCD_REG_157 0x9D
#define LCD_REG_192 0xC0
#define LCD_REG_193 0xC1
#define LCD_REG_229 0xE5
//LCD color
#define LCD_COLOR_WHITE 0xFFFF
#define LCD_COLOR_BLACK 0x0000
#define LCD_COLOR_GREY 0xF7DE
#define LCD_COLOR_BLUE 0x001F
#define LCD_COLOR_BLUE2 0x051F
#define LCD_COLOR_RED 0xF800
#define LCD_COLOR_MAGENTA 0xF81F
#define LCD_COLOR_GREEN 0x07E0
#define LCD_COLOR_CYAN 0x7FFF
#define LCD_COLOR_YELLOW 0xFFE0
//LCD Lines depending on the chosen fonts.
#define LCD_LINE_0 LINE(0)
#define LCD_LINE_1 LINE(1)
#define LCD_LINE_2 LINE(2)
#define LCD_LINE_3 LINE(3)
#define LCD_LINE_4 LINE(4)
#define LCD_LINE_5 LINE(5)
#define LCD_LINE_6 LINE(6)
#define LCD_LINE_7 LINE(7)
#define LCD_LINE_8 LINE(8)
#define LCD_LINE_9 LINE(9)
#define LCD_LINE_10 LINE(10)
#define LCD_LINE_11 LINE(11)
#define LCD_LINE_12 LINE(12)
#define LCD_LINE_13 LINE(13)
#define LCD_LINE_14 LINE(14)
#define LCD_LINE_15 LINE(15)
#define LCD_LINE_16 LINE(16)
#define LCD_LINE_17 LINE(17)
#define LCD_LINE_18 LINE(18)
#define LCD_LINE_19 LINE(19)
#define LCD_LINE_20 LINE(20)
#define LCD_LINE_21 LINE(21)
#define LCD_LINE_22 LINE(22)
#define LCD_LINE_23 LINE(23)
#define LCD_LINE_24 LINE(24)
#define LCD_LINE_25 LINE(25)
#define LCD_LINE_26 LINE(26)
#define LCD_LINE_27 LINE(27)
#define LCD_LINE_28 LINE(28)
#define LCD_LINE_29 LINE(29)
#define White 0xFFFF
#define Black 0x0000
#define Grey 0xF7DE
#define Blue 0x001F
#define Blue2 0x051F
#define Red 0xF800
#define Magenta 0xF81F
#define Green 0x07E0
#define Cyan 0x7FFF
#define Yellow 0xFFE0
#define Line0 LCD_LINE_0
#define Line1 LCD_LINE_1
#define Line2 LCD_LINE_2
#define Line3 LCD_LINE_3
#define Line4 LCD_LINE_4
#define Line5 LCD_LINE_5
#define Line6 LCD_LINE_6
#define Line7 LCD_LINE_7
#define Line8 LCD_LINE_8
#define Line9 LCD_LINE_9
//LCD default font
#define LCD_DEFAULT_FONT Font16x24
//#define LCD_DEFAULT_FONT Font8x12
//#define LCD_DEFAULT_FONT Font12x12
//LCD Direction
#define LCD_DIR_HORIZONTAL 0x0000
#define LCD_DIR_VERTICAL 0x0001
// LCD Size (Width and Height)
#define LCD_PIXEL_WIDTH 0x0140
#define LCD_PIXEL_HEIGHT 0x00F0
// STM3210C_EVAL_LCD_Exported_Macros
#define ASSEMBLE_RGB(R, G, B) ((((R)& 0xF8) << 8) | (((G) & 0xFC) << 3) | (((B) & 0xF8) >> 3))
// STM3210C_EVAL_LCD_Exported_Functions
//void LCD_DeInit(void);
void LCD_Setup(void);
void STM3210C_LCD_Init(void);
void LCD_DisplayWelcomeStr(uint8_t Line);
void LCD_SetColors(__IO uint16_t _TextColor, __IO uint16_t _BackColor);
void LCD_GetColors(__IO uint16_t *_TextColor, __IO uint16_t *_BackColor);
void LCD_SetTextColor(__IO uint16_t Color);
void LCD_SetBackColor(__IO uint16_t Color);
void LCD_ClearLine(uint8_t Line);
void LCD_Clear(uint16_t Color);
void LCD_SetCursor(uint8_t Xpos, uint16_t Ypos);
void LCD_DrawChar(uint8_t Xpos, uint16_t Ypos, const uint16_t *c);
void LCD_DisplayChar(uint8_t Line, uint16_t Column, uint8_t Ascii);
void LCD_SetFont(sFONT *fonts);
sFONT *LCD_GetFont(void);
void LCD_DisplayStringLine(uint8_t Line, uint8_t *ptr);
void LCD_SetDisplayWindow(uint8_t Xpos, uint16_t Ypos, uint8_t Height, uint16_t Width);
void LCD_WindowModeDisable(void);
void LCD_DrawLine(uint8_t Xpos, uint16_t Ypos, uint16_t Length, uint8_t Direction);
void LCD_DrawRect(uint8_t Xpos, uint16_t Ypos, uint8_t Height, uint16_t Width);
void LCD_DrawCircle(uint8_t Xpos, uint16_t Ypos, uint16_t Radius);
void LCD_DrawMonoPict(const uint32_t *Pict);
#ifdef USE_LCD_DrawBMP
//void LCD_DrawBMP(uint32_t BmpAddress);
void LCD_DrawBMP(const uint16_t *BmpAddress);
#endif
void LCD_DrawUniLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2);
void LCD_DrawFullRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height);
void LCD_DrawFullCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius);
void LCD_PolyLine(pPoint Points, uint16_t PointCount);
void LCD_PolyLineRelative(pPoint Points, uint16_t PointCount);
void LCD_ClosedPolyLine(pPoint Points, uint16_t PointCount);
void LCD_ClosedPolyLineRelative(pPoint Points, uint16_t PointCount);
void LCD_FillPolyLine(pPoint Points, uint16_t PointCount);
void LCD_WriteRegIndex(uint8_t LCD_Reg);
void LCD_WriteReg(uint8_t LCD_Reg, uint16_t LCD_RegValue);
void LCD_WriteRAM_Prepare(void);
void LCD_WriteRAMWord(uint16_t RGB_Code);
uint16_t LCD_ReadReg(uint8_t LCD_Reg);
void LCD_WriteRAM(uint16_t RGB_Code);
void LCD_Pins_Config(void);
void LCD_SetPoint(uint8_t Xpos, uint16_t Ypos, uint16_t Color);
#ifdef __cplusplus
}
#endif
#endif /* __STM3210C_EVAL_LCD_H */
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -