api_lib.c

LWIP在STM32裸机上的移植

/**
 * @file
 * Sequential API External module
 *
 */
 
/*
 * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
 * All rights reserved. 
 * 
 * Redistribution and use in source and binary forms, with or without modification, 
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission. 
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
 * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
 * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
 * OF SUCH DAMAGE.
 *
 * This file is part of the lwIP TCP/IP stack.
 * 
 * Author: Adam Dunkels <[e-mail]>
 *
 */

/* This is the part of the API that is linked with
   the application */

#include "lwip/opt.h"

#if LWIP_NETCONN /* don't build if not configured for use in lwipopts.h */

#include "lwip/api.h"
#include "lwip/tcpip.h"
#include "lwip/memp.h"

#include "lwip/ip.h"
#include "lwip/raw.h"
#include "lwip/udp.h"
#include "lwip/tcp.h"

#include <string.h>

/**
 * Create a new netconn (of a specific type) that has a callback function.
 * The corresponding pcb is also created.
 *
 * @param t the type of 'connection' to create (@see enum netconn_type)
 * @param proto the IP protocol for RAW IP pcbs
 * @param callback a function to call on status changes (RX available, TX'ed)
 * @return a newly allocated struct netconn or
 *         NULL on memory error
 */
struct netconn*
netconn_new_with_proto_and_callback(enum netconn_type t, u8_t proto, netconn_callback callback)
{
  struct netconn *conn;
  struct api_msg msg;

  conn = netconn_alloc(t, callback);
  if (conn != NULL ) {
    msg.function = do_newconn;
    msg.msg.msg.n.proto = proto;
    msg.msg.conn = conn;
    TCPIP_APIMSG(&msg);

    if (conn->err != ERR_OK) {
      LWIP_ASSERT("freeing conn without freeing pcb", conn->pcb.tcp == NULL);
      LWIP_ASSERT("conn has no op_completed", conn->op_completed != SYS_SEM_NULL);
      LWIP_ASSERT("conn has no recvmbox", conn->recvmbox != SYS_MBOX_NULL);
      LWIP_ASSERT("conn->acceptmbox shouldn't exist", conn->acceptmbox == SYS_MBOX_NULL);
      sys_sem_free(conn->op_completed);
      sys_mbox_free(conn->recvmbox);
      memp_free(MEMP_NETCONN, conn);
      return NULL;
    }
  }
  return conn;
}

/**
 * Close a netconn 'connection' and free its resources.
 * UDP and RAW connection are completely closed, TCP pcbs might still be in a waitstate
 * after this returns.
 *
 * @param conn the netconn to delete
 * @return ERR_OK if the connection was deleted
 */
err_t
netconn_delete(struct netconn *conn)
{
  struct api_msg msg;

  /* No ASSERT here because possible to get a (conn == NULL) if we got an accept error */
  if (conn == NULL) {
    return ERR_OK;
  }

  msg.function = do_delconn;
  msg.msg.conn = conn;
  tcpip_apimsg(&msg);

  conn->pcb.tcp = NULL;
  netconn_free(conn);

  return ERR_OK;
}

/**
 * Get the local or remote IP address and port of a netconn.
 * For RAW netconns, this returns the protocol instead of a port!
 *
 * @param conn the netconn to query
 * @param addr a pointer to which to save the IP address
 * @param port a pointer to which to save the port (or protocol for RAW)
 * @param local 1 to get the local IP address, 0 to get the remote one
 * @return ERR_CONN for invalid connections
 *         ERR_OK if the information was retrieved
 */
err_t
netconn_getaddr(struct netconn *conn, struct ip_addr *addr, u16_t *port, u8_t local)
{
  struct api_msg msg;

  LWIP_ERROR("netconn_getaddr: invalid conn", (conn != NULL), return ERR_ARG;);
  LWIP_ERROR("netconn_getaddr: invalid addr", (addr != NULL), return ERR_ARG;);
  LWIP_ERROR("netconn_getaddr: invalid port", (port != NULL), return ERR_ARG;);

  msg.function = do_getaddr;
  msg.msg.conn = conn;
  msg.msg.msg.ad.ipaddr = addr;
  msg.msg.msg.ad.port = port;
  msg.msg.msg.ad.local = local;
  TCPIP_APIMSG(&msg);

  return conn->err;
}

/**
 * Bind a netconn to a specific local IP address and port.
 * Binding one netconn twice might not always be checked correctly!
 *
 * @param conn the netconn to bind
 * @param addr the local IP address to bind the netconn to (use IP_ADDR_ANY
 *             to bind to all addresses)
 * @param port the local port to bind the netconn to (not used for RAW)
 * @return ERR_OK if bound, any other err_t on failure
 */
err_t
netconn_bind(struct netconn *conn, struct ip_addr *addr, u16_t port)
{
  struct api_msg msg;

  LWIP_ERROR("netconn_bind: invalid conn", (conn != NULL), return ERR_ARG;);

  msg.function = do_bind;
  msg.msg.conn = conn;
  msg.msg.msg.bc.ipaddr = addr;
  msg.msg.msg.bc.port = port;
  TCPIP_APIMSG(&msg);
  return conn->err;
}

/**
 * Connect a netconn to a specific remote IP address and port.
 *
 * @param conn the netconn to connect
 * @param addr the remote IP address to connect to
 * @param port the remote port to connect to (no used for RAW)
 * @return ERR_OK if connected, return value of tcp_/udp_/raw_connect otherwise
 */
err_t
netconn_connect(struct netconn *conn, struct ip_addr *addr, u16_t port)
{
  struct api_msg msg;

  LWIP_ERROR("netconn_connect: invalid conn", (conn != NULL), return ERR_ARG;);

  msg.function = do_connect;
  msg.msg.conn = conn;
  msg.msg.msg.bc.ipaddr = addr;
  msg.msg.msg.bc.port = port;
  /* This is the only function which need to not block tcpip_thread */
  tcpip_apimsg(&msg);
  return conn->err;
}

/**
 * Disconnect a netconn from its current peer (only valid for UDP netconns).
 *
 * @param conn the netconn to disconnect
 * @return TODO: return value is not set here...
 */
err_t
netconn_disconnect(struct netconn *conn)
{
  struct api_msg msg;

  LWIP_ERROR("netconn_disconnect: invalid conn", (conn != NULL), return ERR_ARG;);

  msg.function = do_disconnect;
  msg.msg.conn = conn;
  TCPIP_APIMSG(&msg);
  return conn->err;
}

/**
 * Set a TCP netconn into listen mode
 *
 * @param conn the tcp netconn to set to listen mode
 * @param backlog the listen backlog, only used if TCP_LISTEN_BACKLOG==1
 * @return ERR_OK if the netconn was set to listen (UDP and RAW netconns
 *         don't return any error (yet?))
 */
err_t
netconn_listen_with_backlog(struct netconn *conn, u8_t backlog)
{
  struct api_msg msg;

  /* This does no harm. If TCP_LISTEN_BACKLOG is off, backlog is unused. */
  LWIP_UNUSED_ARG(backlog);

  LWIP_ERROR("netconn_listen: invalid conn", (conn != NULL), return ERR_ARG;);

  msg.function = do_listen;
  msg.msg.conn = conn;
#if TCP_LISTEN_BACKLOG
  msg.msg.msg.lb.backlog = backlog;
#endif /* TCP_LISTEN_BACKLOG */
  TCPIP_APIMSG(&msg);
  return conn->err;
}

/**
 * Accept a new connection on a TCP listening netconn.
 *
 * @param conn the TCP listen netconn
 * @return the newly accepted netconn or NULL on timeout
 */
struct netconn *
netconn_accept(struct netconn *conn)
{
  struct netconn *newconn;

  LWIP_ERROR("netconn_accept: invalid conn",       (conn != NULL),                      return NULL;);
  LWIP_ERROR("netconn_accept: invalid acceptmbox", (conn->acceptmbox != SYS_MBOX_NULL), return NULL;);

#if LWIP_SO_RCVTIMEO
  if (sys_arch_mbox_fetch(conn->acceptmbox, (void *)&newconn, conn->recv_timeout) == SYS_ARCH_TIMEOUT) {
    newconn = NULL;
  } else
#else
  sys_arch_mbox_fetch(conn->acceptmbox, (void *)&newconn, 0);
#endif /* LWIP_SO_RCVTIMEO*/
  {
    /* Register event with callback */
    API_EVENT(conn, NETCONN_EVT_RCVMINUS, 0);

#if TCP_LISTEN_BACKLOG
    if (newconn != NULL) {
      /* Let the stack know that we have accepted the connection. */
      struct api_msg msg;
      msg.function = do_recv;
      msg.msg.conn = conn;
      TCPIP_APIMSG(&msg);
    }