简易信号发生器源程序.txt

这是一个基于89C51单片机的简易信号发生器的源程序

#include <reg52.h>
#include <stdio.h>
#include <absacc.h>
#define DA0832 XBYTE[0Xa000]
#define uchar unsigned char
#define S1 XBYTE[0X0000]
#define S2 XBYTE[0X2000]
#define S3 XBYTE[0X4000]
uchar code tab[10]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};
uchar code tosin[256]={0x80,0x83,0x86,0x89,0x8d,0x90,0x93,0x96,0x99,0x9c,0x9f,0xa2,0xa5,0xa8,0xab,0xae,0xb1,0xb4,0xb7,0xba,0xbc,0xbf,0xc2,0xc5
,0xc7,0xca,0xcc,0xcf,0xd1,0xd4,0xd6,0xd8,0xda,0xdd,0xdf,0xe1,0xe3,0xe5,0xe7,0xe9,0xea,0xec,0xee,0xef,0xf1,0xf2,0xf4,0xf5
,0xf6,0xf7,0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd
,0xfd,0xfc,0xfb,0xfa,0xf9,0xf8,0xf7,0xf6,0xf5,0xf4,0xf2,0xf1,0xef,0xee,0xec,0xea,0xe9,0xe7,0xe5,0xe3,0xe1,0xde,0xdd,0xda
,0xd8,0xd6,0xd4,0xd1,0xcf,0xcc,0xca,0xc7,0xc5,0xc2,0xbf,0xbc,0xba,0xb7,0xb4,0xb1,0xae,0xab,0xa8,0xa5,0xa2,0x9f,0x9c,0x99
,0x96,0x93,0x90,0x8d,0x89,0x86,0x83,0x80,0x80,0x7c,0x79,0x76,0x72,0x6f,0x6c,0x69,0x66,0x63,0x60,0x5d,0x5a,0x57,0x55,0x51
,0x4e,0x4c,0x48,0x45,0x43,0x40,0x3d,0x3a,0x38,0x35,0x33,0x30,0x2e,0x2b,0x29,0x27,0x25,0x22,0x20,0x1e,0x1c,0x1a,0x18,0x16
,0x15,0x13,0x11,0x10,0x0e,0x0d,0x0b,0x0a,0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00
,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02 ,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0d,0x0e,0x10,0x11,0x13,0x15
,0x16,0x18,0x1a,0x1c,0x1e,0x20,0x22,0x25,0x27,0x29,0x2b,0x2e,0x30,0x33,0x35,0x38,0x3a,0x3d,0x40,0x43,0x45,0x48,0x4c,0x4e 
,0x51,0x55,0x57,0x5a,0x5d,0x60,0x63,0x66 ,0x69,0x6c,0x6f,0x72,0x76,0x79,0x7c,0x80 };
uchar fun=0,b=0,c=0,d=0,tl,th;

void key1(void);
void key2(void);
void key3(void);
void key4(void);
void judge(void);

void main(void)
{
 TMOD=0X01;
 TR0=1;
 th=0xff;
 tl=0xd0;
 TH0=th;
 TL0=tl;
 ET0=1;
 EA=1;
 while(1)
  {
   judge();
  }
}

void judge(void)
{
 uchar line,row,de1,de2,keym;
 P1=0x0f;
 keym=P1;
 if(keym==0x0f)return;
 for(de1=0;de1<200;de1++)
     for(de2=0;de2<125;de2++){;}
 P1=0x0f;
 keym=P1;
if(keym==0x0f)return;
 P1=0x0f;
 line=P1;
 P1=0xf0;
 row=P1;
 line=line+row;/*存放特征键值*/

   if(line==0xde)key1();
  if(line==0x7e)key2();
  if(line==0xbd)key3();
  if(line==0x7d)key4();
}

void key1(void)             //１键选择发波类型,1为正弦波,2为三角波,3为方波
{
 fun++;
 if(fun==4)fun=0x00;
 
}

void key2(void)            //２键加大频率
{
 tl++;
 if(tl==0x1f)th++;
}
void key3(void)           //３键减小频率
{
 tl--;
 if(tl==0x00)th--;
}

void key4(void)                     //４键显示频率
{
 double t;
 int f;
 TR0=0;//ＥＴ０的区别
 t=(65535-th*256-tl)*0.4;
 f=(int)(1000/t);
 S3=tab[f%10];
 f=f/10;
 S2=tab[f%10];
 f=f/10;
 if(f==0)S1=0;
 else S1=tab[f];
 TR0=1;
}

void time0_int(void) interrupt 1   //中断服务程序
{
 TR0=0;
 if(fun==1)
    {
	DA0832=tosin[b];             //正弦波
    b++;
	}
 else if(fun==2)                //三角波
      {
	   if(c<128)DA0832=c;
       else DA0832=255-c;
         c++;
		 }
 else if(fun==3)                // 方波
      {
	   d++;
	   if(d<=128)DA0832=0x00;
       else DA0832=0xff;
	   }
 TH0=th;
 TL0=tl;
 TR0=1;
}