lpc177x_8x_gpio.c

LPC1788的USBHOST的FATFS移植

/**********************************************************************
* $Id$		lpc177x_8x_gpio.c			2011-06-02
*//**
* @file		lpc177x_8x_gpio.c
* @brief	Contains all functions support for GPIO firmware library
*			on LPC177x_8x
* @version	1.0
* @date		02. June. 2011
* @author	NXP MCU SW Application Team
* 
* Copyright(C) 2011, NXP Semiconductor
* All rights reserved.
*
***********************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
**********************************************************************/

/* Peripheral group ----------------------------------------------------------- */
/** @addtogroup GPIO
 * @{
 */

/* Includes ------------------------------------------------------------------- */
#include "lpc177x_8x_gpio.h"

/* Private Functions ---------------------------------------------------------- */

static LPC_GPIO_TypeDef *GPIO_GetPointer(uint8_t portNum);
static GPIO_HalfWord_TypeDef *FIO_HalfWordGetPointer(uint8_t portNum);
static GPIO_Byte_TypeDef *FIO_ByteGetPointer(uint8_t portNum);

/*********************************************************************//**
 * @brief		Get pointer to GPIO peripheral due to GPIO port
 * @param[in]	portNum		Port Number value, should be in range from 0 to 4.
 * @return		Pointer to GPIO peripheral
 **********************************************************************/
static LPC_GPIO_TypeDef *GPIO_GetPointer(uint8_t portNum)
{
	LPC_GPIO_TypeDef *pGPIO = NULL;

	switch (portNum)
	{
		case 0:
			pGPIO = LPC_GPIO0;
			break;

		case 1:
			pGPIO = LPC_GPIO1;
			break;

		case 2:
			pGPIO = LPC_GPIO2;
			break;

		case 3:
			pGPIO = LPC_GPIO3;
			break;

		case 4:
			pGPIO = LPC_GPIO4;
			break;

		default:
			break;
	}

	return pGPIO;
}

/*********************************************************************//**
 * @brief		Get pointer to FIO peripheral in halfword accessible style
 * 				due to FIO port
 * @param[in]	portNum		Port Number value, should be in range from 0 to 4.
 * @return		Pointer to FIO peripheral
 **********************************************************************/
static GPIO_HalfWord_TypeDef *FIO_HalfWordGetPointer(uint8_t portNum)
{
	GPIO_HalfWord_TypeDef *pFIO = NULL;

	switch (portNum)
	{
		case 0:
			pFIO = GPIO0_HalfWord;
			break;

		case 1:
			pFIO = GPIO1_HalfWord;
			break;

		case 2:
			pFIO = GPIO2_HalfWord;
			break;

		case 3:
			pFIO = GPIO3_HalfWord;
			break;

		case 4:
			pFIO = GPIO4_HalfWord;
			break;

		case 5:
			pFIO = GPIO5_HalfWord;
			break;

		default:
			break;
	}

	return pFIO;
}

/*********************************************************************//**
 * @brief		Get pointer to FIO peripheral in byte accessible style
 * 				due to FIO port
 * @param[in]	portNum		Port Number value, should be in range from 0 to 4.
 * @return		Pointer to FIO peripheral
 **********************************************************************/
static GPIO_Byte_TypeDef *FIO_ByteGetPointer(uint8_t portNum)
{
	GPIO_Byte_TypeDef *pFIO = NULL;

	switch (portNum)
	{
		case 0:
			pFIO = GPIO0_Byte;
			break;

		case 1:
			pFIO = GPIO1_Byte;
			break;

		case 2:
			pFIO = GPIO2_Byte;
			break;

		case 3:
			pFIO = GPIO3_Byte;
			break;

		case 4:
			pFIO = GPIO4_Byte;
			break;

		default:
			break;
	}

	return pFIO;
}

/* End of Private Functions --------------------------------------------------- */


/* Public Functions ----------------------------------------------------------- */
/** @addtogroup GPIO_Public_Functions
 * @{
 */


/* GPIO ------------------------------------------------------------------------------ */

/*********************************************************************//**
 * @brief		Set Direction for GPIO port.
 * @param[in]	portNum		Port Number value, should be in range from 0 to 4
 * @param[in]	bitValue	Value that contains all bits to set direction,
 * 							in range from 0 to 0xFFFFFFFF.
 * 							example: value 0x5 to set direction for bit 0 and bit 1.
 * @param[in]	dir			Direction value, should be:
 * 							- 0: Input.
 * 							- 1: Output.
 * @return		None
 *
 * Note: All remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 **********************************************************************/
void GPIO_SetDir(uint8_t portNum, uint32_t bitValue, uint8_t dir)
{
	LPC_GPIO_TypeDef *pGPIO = GPIO_GetPointer(portNum);

	if (pGPIO != NULL)
	{
		// Enable Output
		if (dir)
		{
			pGPIO->DIR |= bitValue;
		}
		// Enable Input
		else
		{
			pGPIO->DIR &= ~bitValue;
		}
	}
}


/*********************************************************************//**
 * @brief		Set Value for bits that have output direction on GPIO port.
 * @param[in]	portNum		Port number value, should be in range from 0 to 4
 * @param[in]	bitValue	Value that contains all bits on GPIO to set,
 * 							in range from 0 to 0xFFFFFFFF.
 * 							example: value 0x5 to set bit 0 and bit 1.
 * @return		None
 *
 * Note:
 * - For all bits that has been set as input direction, this function will
 * not effect.
 * - For all remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 **********************************************************************/
void GPIO_SetValue(uint8_t portNum, uint32_t bitValue)
{
	LPC_GPIO_TypeDef *pGPIO = GPIO_GetPointer(portNum);

	if (pGPIO != NULL)
	{
		pGPIO->SET = bitValue;
	}
}

/*********************************************************************//**
 * @brief		Clear Value for bits that have output direction on GPIO port.
 * @param[in]	portNum		Port number value, should be in range from 0 to 4
 * @param[in]	bitValue	Value that contains all bits on GPIO to clear,
 * 							in range from 0 to 0xFFFFFFFF.
 * 							example: value 0x5 to clear bit 0 and bit 1.
 * @return		None
 *
 * Note:
 * - For all bits that has been set as input direction, this function will
 * not effect.
 * - For all remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 **********************************************************************/
void GPIO_ClearValue(uint8_t portNum, uint32_t bitValue)
{
	LPC_GPIO_TypeDef *pGPIO = GPIO_GetPointer(portNum);

	if (pGPIO != NULL)
	{
		pGPIO->CLR = bitValue;
	}
}

/*********************************************************************//**
 * @brief		Output to the GPIO pin an expected value
 * @param[in]	portNum		Port number value, should be in range from 0 to 4
 * @param[in]	bitValue	Value that contains all bits on GPIO to clear,
 * 							in range from 0 to 0xFFFFFFFF.
 * 							example: value 0x5 to clear bit 0 and bit 1.
 * @return		None
 *
 * Note:
 * - For all bits that has been set as input direction, this function will
 * not effect.
 * - For all remaining bits that are not activated in bitValue (value '0')
 * will not be effected by this function.
 **********************************************************************/
void GPIO_OutputValue(uint8_t portNum, uint32_t bitMask, uint8_t value)
{
	if (value == 0)
	{
		GPIO_ClearValue(portNum, bitMask);
	}
	else
	{
		GPIO_SetValue(portNum, bitMask);
	}

}


/*********************************************************************//**
 * @brief		Read Current state on port pin that have input direction of GPIO
 * @param[in]	portNum		Port number to read value, in range from 0 to 4
 * @return		Current value of GPIO port.
 *
 * Note: Return value contain state of each port pin (bit) on that GPIO regardless
 * its direction is input or output.
 **********************************************************************/
uint32_t GPIO_ReadValue(uint8_t portNum)
{
	LPC_GPIO_TypeDef *pGPIO = GPIO_GetPointer(portNum);

	if (pGPIO != NULL)
	{
		return pGPIO->PIN;
	}

	return (0);
}

/*********************************************************************//**
 * @brief		Enable GPIO interrupt (just used for P0.0-P0.30, P2.0-P2.13)
 * @param[in]	portNum		Port number to read value, should be: 0 or 2
 * @param[in]	bitValue	Value that contains all bits on GPIO to enable,
 * 							in range from 0 to 0xFFFFFFFF.
 * @param[in]	edgeState	state of edge, should be:
 * 							- 0: Rising edge
 * 							- 1: Falling edge
 * @return		None
 **********************************************************************/
void GPIO_IntCmd(uint8_t portNum, uint32_t bitValue, uint8_t edgeState)
{
	if((portNum == 0)&&(edgeState == 0))
		LPC_GPIOINT->IO0IntEnR = bitValue;
	else if ((portNum == 2)&&(edgeState == 0))
		LPC_GPIOINT->IO2IntEnR = bitValue;
	else if ((portNum == 0)&&(edgeState == 1))
		LPC_GPIOINT->IO0IntEnF = bitValue;
	else if ((portNum == 2)&&(edgeState == 1))
		LPC_GPIOINT->IO2IntEnF = bitValue;
	else
		//Error
		while(1);
}

/*********************************************************************//**
 * @brief		Get GPIO Interrupt Status (just used for P0.0-P0.30, P2.0-P2.13)
 * @param[in]	portNum		Port number to read value, should be: 0 or 2
 * @param[in]	pinNum		Pin number, should be: 0..30(with port 0) and 0..13
 * 							(with port 2)
 * @param[in]	edgeState	state of edge, should be:
 * 							- 0: Rising edge
 * 							- 1: Falling edge
 * @return		Bool	could be:
 * 						- ENABLE: Interrupt has been generated due to a rising
 * 								edge on P0.0
 * 						- DISABLE: A rising edge has not been detected on P0.0
 **********************************************************************/
FunctionalState GPIO_GetIntStatus(uint8_t portNum, uint32_t pinNum, uint8_t edgeState)
{
	if((portNum == 0) && (edgeState == 0))//Rising Edge
		return (((LPC_GPIOINT->IO0IntStatR)>>pinNum)& 0x1);
	else if ((portNum == 2) && (edgeState == 0))
		return (((LPC_GPIOINT->IO2IntStatR)>>pinNum)& 0x1);
	else if ((portNum == 0) && (edgeState == 1))//Falling Edge
		return (((LPC_GPIOINT->IO0IntStatF)>>pinNum)& 0x1);
	else if ((portNum == 2) && (edgeState == 1))
		return (((LPC_GPIOINT->IO2IntStatF)>>pinNum)& 0x1);
	else
		//Error
		while(1);
}
/*********************************************************************//**
 * @brief		Clear GPIO interrupt (just used for P0.0-P0.30, P2.0-P2.13)
 * @param[in]	portNum		Port number to read value, should be: 0 or 2
 * @param[in]	bitValue	Value that contains all bits on GPIO to enable,
 * 							in range from 0 to 0xFFFFFFFF.
 * @return		None
 **********************************************************************/
void GPIO_ClearInt(uint8_t portNum, uint32_t bitValue)
{
	if(portNum == 0)
		LPC_GPIOINT->IO0IntClr = bitValue;
	else if (portNum == 2)
		LPC_GPIOINT->IO2IntClr = bitValue;
	else
		//Invalid portNum
		while(1);
}

/* FIO word accessible ----------------------------------------------------------------- */
/* Stub function for FIO (word-accessible) style */

/**
 * @brief The same with GPIO_SetDir()
 */
void FIO_SetDir(uint8_t portNum, uint32_t bitValue, uint8_t dir)
{
	GPIO_SetDir(portNum, bitValue, dir);
}

/**
 * @brief The same with GPIO_SetValue()
 */
void FIO_SetValue(uint8_t portNum, uint32_t bitValue)
{
	GPIO_SetValue(portNum, bitValue);
}

/**
 * @brief The same with GPIO_ClearValue()
 */
void FIO_ClearValue(uint8_t portNum, uint32_t bitValue)
{
	GPIO_ClearValue(portNum, bitValue);
}

/**
 * @brief The same with GPIO_ReadValue()
 */
uint32_t FIO_ReadValue(uint8_t portNum)
{
	return (GPIO_ReadValue(portNum));
}

/**
 * @brief The same with GPIO_IntCmd()
 */
void FIO_IntCmd(uint8_t portNum, uint32_t bitValue, uint8_t edgeState)
{
	GPIO_IntCmd(portNum, bitValue, edgeState);
}

/**
 * @brief The same with GPIO_GetIntStatus()
 */
FunctionalState FIO_GetIntStatus(uint8_t portNum, uint32_t pinNum, uint8_t edgeState)
{
	return (GPIO_GetIntStatus(portNum, pinNum, edgeState));
}

/**
 * @brief The same with GPIO_ClearInt()
 */
void FIO_ClearInt(uint8_t portNum, uint32_t bitValue)