📄 stm32+
字号:
<html>
<body>
<pre>
<h1>礦ision Build Log</h1>
<h2>Project:</h2>
D:\Documents\Desktop\复件 01流水灯\USER\TEST.uvproj
Project File Date: 04/23/2012
<h2>Output:</h2>
Build target 'Target 1'
compiling test.c...
compiling delay.c...
compiling sys.c...
compiling usart.c...
compiling led.c...
compiling virtualusart.c...
compiling exti.c...
..\HARDWARE\exti\exti.c(3): error: #5: cannot open source input file "key.h": No such file or directory
..\HARDWARE\exti\exti.c: #include "key.h"
..\HARDWARE\exti\exti.c: ^
..\HARDWARE\exti\exti.c: ..\HARDWARE\exti\exti.c: 0 warnings, 1 error
Target not created
Build target 'Target 1'
compiling exti.c...
..\HARDWARE\exti\exti.c(3): error: #5: cannot open source input file "key.h": No such file or directory
..\HARDWARE\exti\exti.c: #include "key.h"
..\HARDWARE\exti\exti.c: ^
..\HARDWARE\exti\exti.c: ..\HARDWARE\exti\exti.c: 0 warnings, 1 error
Target not created
Build target 'Target 1'
compiling exti.c...
linking...
Program Size: Code=2128 RO-data=268 RW-data=8 ZI-data=512
FromELF: creating hex file...
"TEST.axf" - 0 Error(s), 0 Warning(s).
Build target 'Target 1'
compiling test.c...
compiling virtualusart.c...
compiling exti.c...
..\HARDWARE\exti\exti.c(23): error: #140: too many arguments in function call
..\HARDWARE\exti\exti.c: VURByte(temp);
..\HARDWARE\exti\exti.c: ^
..\HARDWARE\exti\exti.c: ..\HARDWARE\exti\exti.c: 0 warnings, 1 error
Target not created
Build target 'Target 1'
compiling exti.c...
linking...
Program Size: Code=2140 RO-data=268 RW-data=8 ZI-data=512
FromELF: creating hex file...
"TEST.axf" - 0 Error(s), 0 Warning(s).
Build target 'Target 1'
compiling test.c...
test.c(13): warning: #177-D: variable "temp" was declared but never referenced
test.c: u8 temp;
test.c: ^
test.c: test.c: 1 warning, 0 errors
linking...
Program Size: Code=2120 RO-data=268 RW-data=8 ZI-data=512
FromELF: creating hex file...
"TEST.axf" - 0 Error(s), 1 Warning(s).
Build target 'Target 1'
compiling test.c...
linking...
Program Size: Code=2120 RO-data=268 RW-data=8 ZI-data=512
FromELF: creating hex file...
"TEST.axf" - 0 Error(s), 0 Warning(s).
Build target 'Target 1'
compiling test.c...
test.c(19): error: #29: expected an expression
test.c: EXTIX_Init(void);
test.c: ^
test.c(19): error: #140: too many arguments in function call
test.c: EXTIX_Init(void);
test.c: ^
test.c: test.c: 0 warnings, 2 errors
Target not created
Build target 'Target 1'
compiling test.c...
linking...
Program Size: Code=2124 RO-data=268 RW-data=8 ZI-data=512
FromELF: creating hex file...
"TEST.axf" - 0 Error(s), 0 Warning(s).
Load "D:\\Documents\\Desktop\\复件 01流水灯\\USER\\TEST.AXF"
Set JLink Project File to "D:\Documents\Desktop\复件 01流水灯\USER\JLinkSettings.ini"
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled May 20 2010 17:07:46
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
Target info:
------------
Device: STM32F103RB
VTarget = 3.345V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 4
JTAG speed: 2000 kHz
Erase Done.
Programming Done.
Verify OK.
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...
Load "D:\\Documents\\Desktop\\复件 01流水灯\\USER\\TEST.AXF"
Set JLink Project File to "D:\Documents\Desktop\复件 01流水灯\USER\JLinkSettings.ini"
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled May 20 2010 17:07:46
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: FPUnit: 15 code (BP) slots and 15 literal slots
**JLink Warning: No matching core found.
ROMTableAddr = 0x0
Target info:
------------
Device: STM32F103RB
VTarget = 3.345V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 0
JTAG speed: 2000 kHz
* JLink Info: Program size too small. Flash download skipped.
Erase Done.
Programming Done.
Verify OK.
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...
Load "D:\\Documents\\Desktop\\复件 01流水灯\\USER\\TEST.AXF"
Set JLink Project File to "D:\Documents\Desktop\复件 01流水灯\USER\JLinkSettings.ini"
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled May 20 2010 17:07:46
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: FPUnit: 15 code (BP) slots and 15 literal slots
**JLink Warning: No matching core found.
ROMTableAddr = 0x0
Target info:
------------
Device: STM32F103RB
VTarget = 3.345V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 0
JTAG speed: 2000 kHz
* JLink Info: Program size too small. Flash download skipped.
Erase Done.
Programming Done.
Verify OK.
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...
Build target 'Target 1'
linking...
Program Size: Code=2124 RO-data=268 RW-data=8 ZI-data=512
FromELF: creating hex file...
"TEST.axf" - 0 Error(s), 0 Warning(s).
Load "D:\\Documents\\Desktop\\复件 01流水灯\\USER\\TEST.AXF"
Set JLink Project File to "D:\Documents\Desktop\复件 01流水灯\USER\JLinkSettings.ini"
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled May 20 2010 17:07:46
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: FPUnit: 15 code (BP) slots and 15 literal slots
**JLink Warning: No matching core found.
ROMTableAddr = 0x0
Target info:
------------
Device: STM32F103RB
VTarget = 3.345V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 0
JTAG speed: 2000 kHz
* JLink Info: Program size too small. Flash download skipped.
Erase Done.
Programming Done.
Verify OK.
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...
Build target 'Target 1'
compiling test.c...
linking...
Program Size: Code=2124 RO-data=268 RW-data=8 ZI-data=512
FromELF: creating hex file...
"TEST.axf" - 0 Error(s), 0 Warning(s).
Load "D:\\Documents\\Desktop\\复件 01流水灯\\USER\\TEST.AXF"
Set JLink Project File to "D:\Documents\Desktop\复件 01流水灯\USER\JLinkSettings.ini"
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled May 20 2010 17:07:46
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: FPUnit: 15 code (BP) slots and 15 literal slots
**JLink Warning: No matching core found.
ROMTableAddr = 0x0
Target info:
------------
Device: STM32F103RB
VTarget = 3.345V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 0
JTAG speed: 2000 kHz
* JLink Info: Program size too small. Flash download skipped.
Erase Done.
Programming Done.
Verify OK.
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...
Build target 'Target 1'
linking...
Program Size: Code=2124 RO-data=268 RW-data=8 ZI-data=512
FromELF: creating hex file...
"TEST.axf" - 0 Error(s), 0 Warning(s).
Load "D:\\Documents\\Desktop\\复件 01流水灯\\USER\\TEST.AXF"
Set JLink Project File to "D:\Documents\Desktop\复件 01流水灯\USER\JLinkSettings.ini"
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled May 20 2010 17:07:46
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: FPUnit: 15 code (BP) slots and 15 literal slots
**JLink Warning: No matching core found.
ROMTableAddr = 0x0
Target info:
------------
Device: STM32F103RB
VTarget = 3.345V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 0
JTAG speed: 2000 kHz
* JLink Info: Program size too small. Flash download skipped.
Erase Done.
Programming Done.
Verify OK.
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...
Build target 'Target 1'
compiling exti.c...
linking...
Program Size: Code=2120 RO-data=268 RW-data=8 ZI-data=512
FromELF: creating hex file...
"TEST.axf" - 0 Error(s), 0 Warning(s).
Load "D:\\Documents\\Desktop\\复件 01流水灯\\USER\\TEST.AXF"
Set JLink Project File to "D:\Documents\Desktop\复件 01流水灯\USER\JLinkSettings.ini"
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled May 20 2010 17:07:46
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: FPUnit: 15 code (BP) slots and 15 literal slots
**JLink Warning: No matching core found.
ROMTableAddr = 0x0
Target info:
------------
Device: STM32F103RB
VTarget = 3.345V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 0
JTAG speed: 2000 kHz
* JLink Info: Program size too small. Flash download skipped.
Erase Done.
Programming Done.
Verify OK.
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...
Load "D:\\Documents\\Desktop\\复件 01流水灯\\USER\\TEST.AXF"
Set JLink Project File to "D:\Documents\Desktop\复件 01流水灯\USER\JLinkSettings.ini"
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled May 20 2010 17:07:46
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
Target info:
------------
Device: STM32F103RB
VTarget = 3.345V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 4
JTAG speed: 2000 kHz
Erase Done.
Programming Done.
Verify OK.
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...
Load "D:\\Documents\\Desktop\\复件 01流水灯\\USER\\TEST.AXF"
Set JLink Project File to "D:\Documents\Desktop\复件 01流水灯\USER\JLinkSettings.ini"
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled May 20 2010 17:07:46
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
Target info:
------------
Device: STM32F103RB
VTarget = 3.345V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 4
JTAG speed: 2000 kHz
Erase Done.
Programming Done.
Verify OK.
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...
Build target 'Target 1'
compiling exti.c...
linking...
Program Size: Code=2120 RO-data=268 RW-data=8 ZI-data=512
FromELF: creating hex file...
"TEST.axf" - 0 Error(s), 0 Warning(s).
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -