📄 grub-mkdevicemap.c
字号:
/* grub-mkdevicemap.c - make a device map file automatically *//* * GRUB -- GRand Unified Bootloader * Copyright (C) 1999,2000,2001,2002,2003,2004,2005 Free Software Foundation, Inc. * * GRUB is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with GRUB; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */#include <config.h>#include <stdio.h>#include <unistd.h>#include <string.h>#include <stdlib.h>#include <sys/types.h>#include <sys/stat.h>#include <errno.h>#include <fcntl.h>#include <limits.h>#include <grub/util/misc.h>#define _GNU_SOURCE 1#include <getopt.h>#ifdef __NetBSD__/* NetBSD uses /boot for its boot block. */# define DEFAULT_DIRECTORY "/grub"#else# define DEFAULT_DIRECTORY "/boot/grub"#endif#define DEFAULT_DEVICE_MAP DEFAULT_DIRECTORY "/device.map"#ifdef __linux__# if !defined(__GLIBC__) || \ ((__GLIBC__ < 2) || ((__GLIBC__ == 2) && (__GLIBC_MINOR__ < 1)))/* Maybe libc doesn't have large file support. */# include <linux/unistd.h> /* _llseek */# endif /* (GLIBC < 2) || ((__GLIBC__ == 2) && (__GLIBC_MINOR < 1)) */# include <sys/ioctl.h> /* ioctl */# ifndef HDIO_GETGEO# define HDIO_GETGEO 0x0301 /* get device geometry *//* If HDIO_GETGEO is not defined, it is unlikely that hd_geometry is defined. */struct hd_geometry{ unsigned char heads; unsigned char sectors; unsigned short cylinders; unsigned long start;};# endif /* ! HDIO_GETGEO */# ifndef FLOPPY_MAJOR# define FLOPPY_MAJOR 2 /* the major number for floppy */# endif /* ! FLOPPY_MAJOR */# ifndef MAJOR# define MAJOR(dev) \ ({ \ unsigned long long __dev = (dev); \ (unsigned) ((__dev >> 8) & 0xfff) \ | ((unsigned int) (__dev >> 32) & ~0xfff); \ })# endif /* ! MAJOR */# ifndef CDROM_GET_CAPABILITY# define CDROM_GET_CAPABILITY 0x5331 /* get capabilities */# endif /* ! CDROM_GET_CAPABILITY */# ifndef BLKGETSIZE# define BLKGETSIZE _IO(0x12,96) /* return device size */# endif /* ! BLKGETSIZE */#endif /* __linux__ *//* Use __FreeBSD_kernel__ instead of __FreeBSD__ for compatibility with kFreeBSD-based non-FreeBSD systems (e.g. GNU/kFreeBSD) */#if defined(__FreeBSD__) && ! defined(__FreeBSD_kernel__)# define __FreeBSD_kernel__#endif#ifdef __FreeBSD_kernel__ /* Obtain version of kFreeBSD headers */# include <osreldate.h># ifndef __FreeBSD_kernel_version# define __FreeBSD_kernel_version __FreeBSD_version# endif /* Runtime detection of kernel */# include <sys/utsname.h>intget_kfreebsd_version (){ struct utsname uts; int major; int minor; int v[2]; uname (&uts); sscanf (uts.release, "%d.%d", &major, &minor); if (major >= 9) major = 9; if (major >= 5) { v[0] = minor/10; v[1] = minor%10; } else { v[0] = minor%10; v[1] = minor/10; } return major*100000+v[0]*10000+v[1]*1000;}#endif /* __FreeBSD_kernel__ */#if defined(__FreeBSD_kernel__) || defined(__NetBSD__) || defined(__OpenBSD__)# include <sys/ioctl.h> /* ioctl */# include <sys/disklabel.h># include <sys/cdio.h> /* CDIOCCLRDEBUG */# if defined(__FreeBSD_kernel__)# include <sys/param.h># if __FreeBSD_kernel_version >= 500040# include <sys/disk.h># endif# endif /* __FreeBSD_kernel__ */#endif /* __FreeBSD_kernel__ || __NetBSD__ || __OpenBSD__ */#ifdef HAVE_OPENDISK# include <util.h>#endif /* HAVE_OPENDISK */#ifdef __linux__/* Check if we have devfs support. */static inthave_devfs (void){ struct stat st; return stat ("/dev/.devfsd", &st) == 0;}#endif /* __linux__ *//* These three functions are quite different among OSes. */static voidget_floppy_disk_name (char *name, int unit){#if defined(__linux__) /* GNU/Linux */ if (have_devfs ()) sprintf (name, "/dev/floppy/%d", unit); else sprintf (name, "/dev/fd%d", unit);#elif defined(__GNU__) /* GNU/Hurd */ sprintf (name, "/dev/fd%d", unit);#elif defined(__FreeBSD_kernel__) /* kFreeBSD */ if (get_kfreebsd_version () >= 400000) sprintf (name, "/dev/fd%d", unit); else sprintf (name, "/dev/rfd%d", unit);#elif defined(__NetBSD__) /* NetBSD */ /* opendisk() doesn't work for floppies. */ sprintf (name, "/dev/rfd%da", unit);#elif defined(__OpenBSD__) /* OpenBSD */ sprintf (name, "/dev/rfd%dc", unit);#elif defined(__QNXNTO__) /* QNX RTP */ sprintf (name, "/dev/fd%d", unit);#else# warning "BIOS floppy drives cannot be guessed in your operating system." /* Set NAME to a bogus string. */ *name = 0;#endif}static voidget_ide_disk_name (char *name, int unit){#if defined(__linux__) /* GNU/Linux */ sprintf (name, "/dev/hd%c", unit + 'a');#elif defined(__GNU__) /* GNU/Hurd */ sprintf (name, "/dev/hd%d", unit);#elif defined(__FreeBSD_kernel__) /* kFreeBSD */ if (get_kfreebsd_version () >= 400000) sprintf (name, "/dev/ad%d", unit); else sprintf (name, "/dev/rwd%d", unit);#elif defined(__NetBSD__) && defined(HAVE_OPENDISK) /* NetBSD */ char shortname[16]; int fd; sprintf (shortname, "wd%d", unit); fd = opendisk (shortname, O_RDONLY, name, 16, /* length of NAME */ 0 /* char device */ ); close (fd);#elif defined(__OpenBSD__) /* OpenBSD */ sprintf (name, "/dev/rwd%dc", unit);#elif defined(__QNXNTO__) /* QNX RTP */ /* Actually, QNX RTP doesn't distinguish IDE from SCSI, so this could contain SCSI disks. */ sprintf (name, "/dev/hd%d", unit);#else# warning "BIOS IDE drives cannot be guessed in your operating system." /* Set NAME to a bogus string. */ *name = 0;#endif}static voidget_scsi_disk_name (char *name, int unit){#if defined(__linux__) /* GNU/Linux */ sprintf (name, "/dev/sd%c", unit + 'a');#elif defined(__GNU__) /* GNU/Hurd */ sprintf (name, "/dev/sd%d", unit);#elif defined(__FreeBSD_kernel__) /* kFreeBSD */ if (get_kfreebsd_version () >= 400000) sprintf (name, "/dev/da%d", unit); else sprintf (name, "/dev/rda%d", unit);#elif defined(__NetBSD__) && defined(HAVE_OPENDISK) /* NetBSD */ char shortname[16]; int fd; sprintf (shortname, "sd%d", unit); fd = opendisk (shortname, O_RDONLY, name, 16, /* length of NAME */ 0 /* char device */ ); close (fd);#elif defined(__OpenBSD__) /* OpenBSD */ sprintf (name, "/dev/rsd%dc", unit);#elif defined(__QNXNTO__) /* QNX RTP */ /* QNX RTP doesn't distinguish SCSI from IDE, so it is better to disable the detection of SCSI disks here. */ *name = 0;#else# warning "BIOS SCSI drives cannot be guessed in your operating system." /* Set NAME to a bogus string. */ *name = 0;#endif}#ifdef __linux__static voidget_dac960_disk_name (char *name, int controller, int drive){ sprintf (name, "/dev/rd/c%dd%d", controller, drive);}static voidget_ataraid_disk_name (char *name, int unit){ sprintf (name, "/dev/ataraid/d%c", unit + '0');}#endif/* Check if DEVICE can be read. If an error occurs, return zero, otherwise return non-zero. */intcheck_device (const char *device){ char buf[512]; FILE *fp; /* If DEVICE is empty, just return 1. */ if (*device == 0) return 1; fp = fopen (device, "r"); if (! fp) { switch (errno) {#ifdef ENOMEDIUM case ENOMEDIUM:# if 0 /* At the moment, this finds only CDROMs, which can't be read anyway, so leave it out. Code should be reactivated if `removable disks' and CDROMs are supported. */ /* Accept it, it may be inserted. */ return 1;# endif break;#endif /* ENOMEDIUM */ default: /* Break case and leave. */ break; } /* Error opening the device. */ return 0; } /* Make sure CD-ROMs don't get assigned a BIOS disk number before SCSI disks! */#ifdef __linux__# ifdef CDROM_GET_CAPABILITY if (ioctl (fileno (fp), CDROM_GET_CAPABILITY, 0) >= 0) return 0;# else /* ! CDROM_GET_CAPABILITY */ /* Check if DEVICE is a CD-ROM drive by the HDIO_GETGEO ioctl. */ { struct hd_geometry hdg; struct stat st; if (fstat (fileno (fp), &st)) return 0; /* If it is a block device and isn't a floppy, check if HDIO_GETGEO succeeds. */ if (S_ISBLK (st.st_mode) && MAJOR (st.st_rdev) != FLOPPY_MAJOR && ioctl (fileno (fp), HDIO_GETGEO, &hdg)) return 0; }# endif /* ! CDROM_GET_CAPABILITY */#endif /* __linux__ */#if defined(__FreeBSD_kernel__) || defined(__NetBSD__) || defined(__OpenBSD__)# ifdef CDIOCCLRDEBUG if (ioctl (fileno (fp), CDIOCCLRDEBUG, 0) >= 0) return 0;# endif /* CDIOCCLRDEBUG */#endif /* __FreeBSD_kernel__ || __NetBSD__ || __OpenBSD__ */ /* Attempt to read the first sector. */ if (fread (buf, 1, 512, fp) != 512) { fclose (fp); return 0; } fclose (fp); return 1;}static voidmake_device_map (const char *device_map, int floppy_disks){ FILE *fp; int num_hd = 0; int i; if (strcmp (device_map, "-") == 0) fp = stdout; else fp = fopen (device_map, "w"); if (! fp) grub_util_error ("cannot open %s", device_map); /* Floppies. */ for (i = 0; i < floppy_disks; i++) { char name[16]; get_floppy_disk_name (name, i); /* In floppies, write the map, whether check_device succeeds or not, because the user just may not insert floppies. */ if (fp) fprintf (fp, "(fd%d)\t%s\n", i, name); } #ifdef __linux__ if (have_devfs ()) { while (1) { char discn[32]; char name[PATH_MAX]; struct stat st; /* Linux creates symlinks "/dev/discs/discN" for convenience. The way to number disks is the same as GRUB's. */ sprintf (discn, "/dev/discs/disc%d", num_hd); if (stat (discn, &st) < 0) break; if (realpath (discn, name)) { strcat (name, "/disc"); fprintf (fp, "(hd%d)\t%s\n", num_hd, name); } num_hd++; } goto finish; }#endif /* __linux__ */ /* IDE disks. */ for (i = 0; i < 8; i++) { char name[16]; get_ide_disk_name (name, i); if (check_device (name)) { fprintf (fp, "(hd%d)\t%s\n", num_hd, name); num_hd++; } } #ifdef __linux__ /* ATARAID disks. */ for (i = 0; i < 8; i++) { char name[20]; get_ataraid_disk_name (name, i); if (check_device (name)) { fprintf (fp, "(hd%d)\t%s\n", num_hd, name); num_hd++; } }#endif /* __linux__ */ /* The rest is SCSI disks. */ for (i = 0; i < 16; i++) { char name[16]; get_scsi_disk_name (name, i); if (check_device (name)) { fprintf (fp, "(hd%d)\t%s\n", num_hd, name); num_hd++; } } #ifdef __linux__ /* This is for DAC960 - we have /dev/rd/c<controller>d<logical drive>p<partition>. DAC960 driver currently supports up to 8 controllers, 32 logical drives, and 7 partitions. */ { int controller, drive; for (controller = 0; controller < 8; controller++) { for (drive = 0; drive < 15; drive++) { char name[24]; get_dac960_disk_name (name, controller, drive); if (check_device (name)) { fprintf (fp, "(hd%d)\t%s\n", num_hd, name); num_hd++; } } } }#endif /* __linux__ */ finish: if (fp != stdout) fclose (fp);}static struct option options[] = { {"device-map", required_argument, 0, 'm'}, {"probe-second-floppy", no_argument, 0, 's'}, {"no-floppy", no_argument, 0, 'n'}, {"help", no_argument, 0, 'h'}, {"version", no_argument, 0, 'V'}, {"verbose", no_argument, 0, 'v'}, {0, 0, 0, 0} };static voidusage (int status){ if (status) fprintf (stderr, "Try ``grub-mkdevicemap --help'' for more information.\n"); else printf ("\Usage: grub-mkdevicemap [OPTION]...\n\\n\Generate a device map file automatically.\n\\n\ -n, --no-floppy do not probe any floppy drive\n\ -s, --probe-second-floppy probe the second floppy drive\n\ -m, --device-map=FILE use FILE as the device map [default=%s]\n\ -h, --help display this message and exit\n\ -V, --version print version information and exit\n\ -v, --verbose print verbose messages\n\\n\Report bugs to <%s>.\n\", DEFAULT_DEVICE_MAP, PACKAGE_BUGREPORT); exit (status);}intmain (int argc, char *argv[]){ char *dev_map = 0; int floppy_disks = 1; progname = "grub-mkdevicemap"; /* Check for options. */ while (1) { int c = getopt_long (argc, argv, "snm:r:hVv", options, 0); if (c == -1) break; else switch (c) { case 'm': if (dev_map) free (dev_map); dev_map = xstrdup (optarg); break; case 'n': floppy_disks = 0; break; case 's': floppy_disks = 2; break; case 'h': usage (0); break; case 'V': printf ("%s (%s) %s\n", progname, PACKAGE_NAME, PACKAGE_VERSION); return 0; case 'v': verbosity++; break; default: usage (1); break; } } make_device_map (dev_map ? : DEFAULT_DEVICE_MAP, floppy_disks); free (dev_map); return 0;}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -