📄 stm32f0xx_i2c.h
字号:
/**
******************************************************************************
* @file stm32f0xx_i2c.h
* @author MCD Application Team
* @version V1.0.0
* @date 23-March-2012
* @brief This file contains all the functions prototypes for the I2C firmware
* library
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0XX_I2C_H
#define __STM32F0XX_I2C_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"
/** @addtogroup STM32F0xx_StdPeriph_Driver
* @{
*/
/** @addtogroup I2C
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief I2C Init structure definition
*/
typedef struct
{
uint32_t I2C_Timing; /*!< Specifies the I2C_TIMINGR_register value.
This parameter must be set by referring to I2C_Timing_Config_Tool*/
uint32_t I2C_AnalogFilter; /*!< Enables or disables analog noise filter.
This parameter can be a value of @ref I2C_Analog_Filter*/
uint32_t I2C_DigitalFilter; /*!< Configures the digital noise filter.
This parameter can be a number between 0x00 and 0x0F*/
uint32_t I2C_Mode; /*!< Specifies the I2C mode.
This parameter can be a value of @ref I2C_mode*/
uint32_t I2C_OwnAddress1; /*!< Specifies the device own address 1.
This parameter can be a 7-bit or 10-bit address*/
uint32_t I2C_Ack; /*!< Enables or disables the acknowledgement.
This parameter can be a value of @ref I2C_acknowledgement*/
uint32_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged.
This parameter can be a value of @ref I2C_acknowledged_address*/
}I2C_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup I2C_Exported_Constants
* @{
*/
#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \
((PERIPH) == I2C2))
#define IS_I2C_1_PERIPH(PERIPH) ((PERIPH) == I2C1)
/** @defgroup I2C_Analog_Filter
* @{
*/
#define I2C_AnalogFilter_Enable ((uint32_t)0x00000000)
#define I2C_AnalogFilter_Disable I2C_CR1_ANFOFF
#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_AnalogFilter_Enable) || \
((FILTER) == I2C_AnalogFilter_Disable))
/**
* @}
*/
/** @defgroup I2C_Digital_Filter
* @{
*/
#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F)
/**
* @}
*/
/** @defgroup I2C_mode
* @{
*/
#define I2C_Mode_I2C ((uint32_t)0x00000000)
#define I2C_Mode_SMBusDevice I2C_CR1_SMBDEN
#define I2C_Mode_SMBusHost I2C_CR1_SMBHEN
#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \
((MODE) == I2C_Mode_SMBusDevice) || \
((MODE) == I2C_Mode_SMBusHost))
/**
* @}
*/
/** @defgroup I2C_acknowledgement
* @{
*/
#define I2C_Ack_Enable ((uint32_t)0x00000000)
#define I2C_Ack_Disable I2C_CR2_NACK
#define IS_I2C_ACK(ACK) (((ACK) == I2C_Ack_Enable) || \
((ACK) == I2C_Ack_Disable))
/**
* @}
*/
/** @defgroup I2C_acknowledged_address
* @{
*/
#define I2C_AcknowledgedAddress_7bit ((uint32_t)0x00000000)
#define I2C_AcknowledgedAddress_10bit I2C_OAR1_OA1MODE
#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \
((ADDRESS) == I2C_AcknowledgedAddress_10bit))
/**
* @}
*/
/** @defgroup I2C_own_address1
* @{
*/
#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF)
/**
* @}
*/
/** @defgroup I2C_transfer_direction
* @{
*/
#define I2C_Direction_Transmitter ((uint16_t)0x0000)
#define I2C_Direction_Receiver ((uint16_t)0x0400)
#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \
((DIRECTION) == I2C_Direction_Receiver))
/**
* @}
*/
/** @defgroup I2C_DMA_transfer_requests
* @{
*/
#define I2C_DMAReq_Tx I2C_CR1_TXDMAEN
#define I2C_DMAReq_Rx I2C_CR1_RXDMAEN
#define IS_I2C_DMA_REQ(REQ) ((((REQ) & (uint32_t)0xFFFF3FFF) == 0x00) && ((REQ) != 0x00))
/**
* @}
*/
/** @defgroup I2C_slave_address
* @{
*/
#define IS_I2C_SLAVE_ADDRESS(ADDRESS) ((ADDRESS) <= (uint16_t)0x03FF)
/**
* @}
*/
/** @defgroup I2C_own_address2
* @{
*/
#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF)
/**
* @}
*/
/** @defgroup I2C_own_address2_mask
* @{
*/
#define I2C_OA2_NoMask ((uint8_t)0x00)
#define I2C_OA2_Mask01 ((uint8_t)0x01)
#define I2C_OA2_Mask02 ((uint8_t)0x02)
#define I2C_OA2_Mask03 ((uint8_t)0x03)
#define I2C_OA2_Mask04 ((uint8_t)0x04)
#define I2C_OA2_Mask05 ((uint8_t)0x05)
#define I2C_OA2_Mask06 ((uint8_t)0x06)
#define I2C_OA2_Mask07 ((uint8_t)0x07)
#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NoMask) || \
((MASK) == I2C_OA2_Mask01) || \
((MASK) == I2C_OA2_Mask02) || \
((MASK) == I2C_OA2_Mask03) || \
((MASK) == I2C_OA2_Mask04) || \
((MASK) == I2C_OA2_Mask05) || \
((MASK) == I2C_OA2_Mask06) || \
((MASK) == I2C_OA2_Mask07))
/**
* @}
*/
/** @defgroup I2C_timeout
* @{
*/
#define IS_I2C_TIMEOUT(TIMEOUT) ((TIMEOUT) <= (uint16_t)0x0FFF)
/**
* @}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -