📄 stm32f0xx_rtc.h
字号:
with a frequency = RTCCLK / 256 */
#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div32768) || \
((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div16384) || \
((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div8192) || \
((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div4096) || \
((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div2048) || \
((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div1024) || \
((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div512) || \
((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div256))
/**
* @}
*/
/** @defgroup RTC_Tamper_Pin_Precharge_Duration_Definitions
* @{
*/
#define RTC_TamperPrechargeDuration_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
sampling during 1 RTCCLK cycle */
#define RTC_TamperPrechargeDuration_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before
sampling during 2 RTCCLK cycles */
#define RTC_TamperPrechargeDuration_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before
sampling during 4 RTCCLK cycles */
#define RTC_TamperPrechargeDuration_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before
sampling during 8 RTCCLK cycles */
#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TamperPrechargeDuration_1RTCCLK) || \
((DURATION) == RTC_TamperPrechargeDuration_2RTCCLK) || \
((DURATION) == RTC_TamperPrechargeDuration_4RTCCLK) || \
((DURATION) == RTC_TamperPrechargeDuration_8RTCCLK))
/**
* @}
*/
/** @defgroup RTC_Tamper_Pins_Definitions
* @{
*/
#define RTC_Tamper_1 RTC_TAFCR_TAMP1E /*!< Tamper detection enable for
input tamper 1 */
#define RTC_Tamper_2 RTC_TAFCR_TAMP2E /*!< Tamper detection enable for
input tamper 2 */
#define RTC_Tamper_3 RTC_TAFCR_TAMP3E /*!< Tamper detection enable for
input tamper 3 */
#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFD6) == 0x00) && ((TAMPER) != (uint32_t)RESET))
/**
* @}
*/
/** @defgroup RTC_Output_Type_ALARM_OUT
* @{
*/
#define RTC_OutputType_OpenDrain ((uint32_t)0x00000000)
#define RTC_OutputType_PushPull ((uint32_t)0x00040000)
#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OutputType_OpenDrain) || \
((TYPE) == RTC_OutputType_PushPull))
/**
* @}
*/
/** @defgroup RTC_Add_1_Second_Parameter_Definitions
* @{
*/
#define RTC_ShiftAdd1S_Reset ((uint32_t)0x00000000)
#define RTC_ShiftAdd1S_Set ((uint32_t)0x80000000)
#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_ShiftAdd1S_Reset) || \
((SEL) == RTC_ShiftAdd1S_Set))
/**
* @}
*/
/** @defgroup RTC_Substract_Fraction_Of_Second_Value
* @{
*/
#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
/**
* @}
*/
/** @defgroup RTC_Backup_Registers_Definitions
* @{
*/
#define RTC_BKP_DR0 ((uint32_t)0x00000000)
#define RTC_BKP_DR1 ((uint32_t)0x00000001)
#define RTC_BKP_DR2 ((uint32_t)0x00000002)
#define RTC_BKP_DR3 ((uint32_t)0x00000003)
#define RTC_BKP_DR4 ((uint32_t)0x00000004)
#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \
((BKP) == RTC_BKP_DR1) || \
((BKP) == RTC_BKP_DR2) || \
((BKP) == RTC_BKP_DR3) || \
((BKP) == RTC_BKP_DR4))
/**
* @}
*/
/** @defgroup RTC_Input_parameter_format_definitions
* @{
*/
#define RTC_Format_BIN ((uint32_t)0x000000000)
#define RTC_Format_BCD ((uint32_t)0x000000001)
#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_Format_BIN) || ((FORMAT) == RTC_Format_BCD))
/**
* @}
*/
/** @defgroup RTC_Flags_Definitions
* @{
*/
#define RTC_FLAG_RECALPF ((uint32_t)0x00010000)
#define RTC_FLAG_TAMP3F ((uint32_t)0x00008000)
#define RTC_FLAG_TAMP2F ((uint32_t)0x00004000)
#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000)
#define RTC_FLAG_TSOVF ((uint32_t)0x00001000)
#define RTC_FLAG_TSF ((uint32_t)0x00000800)
#define RTC_FLAG_ALRAF ((uint32_t)0x00000100)
#define RTC_FLAG_INITF ((uint32_t)0x00000040)
#define RTC_FLAG_RSF ((uint32_t)0x00000020)
#define RTC_FLAG_INITS ((uint32_t)0x00000010)
#define RTC_FLAG_SHPF ((uint32_t)0x00000008)
#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_RECALPF) || ((FLAG) == RTC_FLAG_TAMP3F) || \
((FLAG) == RTC_FLAG_TAMP2F) || ((FLAG) == RTC_FLAG_TAMP1F) || \
((FLAG) == RTC_FLAG_TSOVF) || ((FLAG) == RTC_FLAG_TSF) || \
((FLAG) == RTC_FLAG_ALRAF) || ((FLAG) == RTC_FLAG_INITF) || \
((FLAG) == RTC_FLAG_RSF) || ((FLAG) == RTC_FLAG_INITS) || \
((FLAG) == RTC_FLAG_SHPF))
#define IS_RTC_CLEAR_FLAG(FLAG) (((FLAG) != (uint32_t)RESET) && (((FLAG) & 0xFFFF06DF) == (uint32_t)RESET))
/**
* @}
*/
/** @defgroup RTC_Interrupts_Definitions
* @{
*/
#define RTC_IT_TS ((uint32_t)0x00008000)
#define RTC_IT_ALRA ((uint32_t)0x00001000)
#define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */
#define RTC_IT_TAMP1 ((uint32_t)0x00020000)
#define RTC_IT_TAMP2 ((uint32_t)0x00040000)
#define RTC_IT_TAMP3 ((uint32_t)0x00080000)
#define IS_RTC_CONFIG_IT(IT) (((IT) != (uint32_t)RESET) && (((IT) & 0xFFFF6FFB) == (uint32_t)RESET))
#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_TS) || ((IT) == RTC_IT_ALRA) || \
((IT) == RTC_IT_TAMP1) || ((IT) == RTC_IT_TAMP2) || \
((IT) == RTC_IT_TAMP3))
#define IS_RTC_CLEAR_IT(IT) (((IT) != (uint32_t)RESET) && (((IT) & 0xFFF16FFF) == (uint32_t)RESET))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* Function used to set the RTC configuration to the default reset state *****/
ErrorStatus RTC_DeInit(void);
/* Initialization and Configuration functions *********************************/
ErrorStatus RTC_Init(RTC_InitTypeDef* RTC_InitStruct);
void RTC_StructInit(RTC_InitTypeDef* RTC_InitStruct);
void RTC_WriteProtectionCmd(FunctionalState NewState);
ErrorStatus RTC_EnterInitMode(void);
void RTC_ExitInitMode(void);
ErrorStatus RTC_WaitForSynchro(void);
ErrorStatus RTC_RefClockCmd(FunctionalState NewState);
void RTC_BypassShadowCmd(FunctionalState NewState);
/* Time and Date configuration functions **************************************/
ErrorStatus RTC_SetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct);
void RTC_TimeStructInit(RTC_TimeTypeDef* RTC_TimeStruct);
void RTC_GetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct);
uint32_t RTC_GetSubSecond(void);
ErrorStatus RTC_SetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct);
void RTC_DateStructInit(RTC_DateTypeDef* RTC_DateStruct);
void RTC_GetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct);
/* Alarms (Alarm A) configuration functions **********************************/
void RTC_SetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct);
void RTC_AlarmStructInit(RTC_AlarmTypeDef* RTC_AlarmStruct);
void RTC_GetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct);
ErrorStatus RTC_AlarmCmd(uint32_t RTC_Alarm, FunctionalState NewState);
void RTC_AlarmSubSecondConfig(uint32_t RTC_Alarm, uint32_t RTC_AlarmSubSecondValue, uint8_t RTC_AlarmSubSecondMask);
uint32_t RTC_GetAlarmSubSecond(uint32_t RTC_Alarm);
/* Daylight Saving configuration functions ************************************/
void RTC_DayLightSavingConfig(uint32_t RTC_DayLightSaving, uint32_t RTC_StoreOperation);
uint32_t RTC_GetStoreOperation(void);
/* Output pin Configuration function ******************************************/
void RTC_OutputConfig(uint32_t RTC_Output, uint32_t RTC_OutputPolarity);
/* Digital Calibration configuration functions ********************************/
void RTC_CalibOutputCmd(FunctionalState NewState);
void RTC_CalibOutputConfig(uint32_t RTC_CalibOutput);
ErrorStatus RTC_SmoothCalibConfig(uint32_t RTC_SmoothCalibPeriod,
uint32_t RTC_SmoothCalibPlusPulses,
uint32_t RTC_SmouthCalibMinusPulsesValue);
/* TimeStamp configuration functions ******************************************/
void RTC_TimeStampCmd(uint32_t RTC_TimeStampEdge, FunctionalState NewState);
void RTC_GetTimeStamp(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_StampTimeStruct, RTC_DateTypeDef* RTC_StampDateStruct);
uint32_t RTC_GetTimeStampSubSecond(void);
/* Tampers configuration functions ********************************************/
void RTC_TamperTriggerConfig(uint32_t RTC_Tamper, uint32_t RTC_TamperTrigger);
void RTC_TamperCmd(uint32_t RTC_Tamper, FunctionalState NewState);
void RTC_TamperFilterConfig(uint32_t RTC_TamperFilter);
void RTC_TamperSamplingFreqConfig(uint32_t RTC_TamperSamplingFreq);
void RTC_TamperPinsPrechargeDuration(uint32_t RTC_TamperPrechargeDuration);
void RTC_TimeStampOnTamperDetectionCmd(FunctionalState NewState);
void RTC_TamperPullUpCmd(FunctionalState NewState);
/* Backup Data Registers configuration functions ******************************/
void RTC_WriteBackupRegister(uint32_t RTC_BKP_DR, uint32_t Data);
uint32_t RTC_ReadBackupRegister(uint32_t RTC_BKP_DR);
/* Output Type Config configuration functions *********************************/
void RTC_OutputTypeConfig(uint32_t RTC_OutputType);
/* RTC_Shift_control_synchonisation_functions *********************************/
ErrorStatus RTC_SynchroShiftConfig(uint32_t RTC_ShiftAdd1S, uint32_t RTC_ShiftSubFS);
/* Interrupts and flags management functions **********************************/
void RTC_ITConfig(uint32_t RTC_IT, FunctionalState NewState);
FlagStatus RTC_GetFlagStatus(uint32_t RTC_FLAG);
void RTC_ClearFlag(uint32_t RTC_FLAG);
ITStatus RTC_GetITStatus(uint32_t RTC_IT);
void RTC_ClearITPendingBit(uint32_t RTC_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F0XX_RTC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -