📄 stm32f0xx_rtc.h
字号:
#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_AlarmDateWeekDaySel_Date) || \
((SEL) == RTC_AlarmDateWeekDaySel_WeekDay))
/**
* @}
*/
/** @defgroup RTC_AlarmMask_Definitions
* @{
*/
#define RTC_AlarmMask_None ((uint32_t)0x00000000)
#define RTC_AlarmMask_DateWeekDay ((uint32_t)0x80000000)
#define RTC_AlarmMask_Hours ((uint32_t)0x00800000)
#define RTC_AlarmMask_Minutes ((uint32_t)0x00008000)
#define RTC_AlarmMask_Seconds ((uint32_t)0x00000080)
#define RTC_AlarmMask_All ((uint32_t)0x80808080)
#define IS_RTC_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET)
/**
* @}
*/
/** @defgroup RTC_Alarms_Definitions
* @{
*/
#define RTC_Alarm_A ((uint32_t)0x00000100)
#define IS_RTC_ALARM(ALARM) ((ALARM) == RTC_Alarm_A)
#define IS_RTC_CMD_ALARM(ALARM) (((ALARM) & (RTC_Alarm_A)) != (uint32_t)RESET)
/**
* @}
*/
/** @defgroup RTC_Alarm_Sub_Seconds_Masks Definitions.
* @{
*/
#define RTC_AlarmSubSecondMask_All ((uint8_t)0x00) /*!< All Alarm SS fields are masked.
There is no comparison on sub seconds
for Alarm */
#define RTC_AlarmSubSecondMask_SS14_1 ((uint8_t)0x01) /*!< SS[14:1] are don't care in Alarm
comparison. Only SS[0] is compared. */
#define RTC_AlarmSubSecondMask_SS14_2 ((uint8_t)0x02) /*!< SS[14:2] are don't care in Alarm
comparison. Only SS[1:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_3 ((uint8_t)0x03) /*!< SS[14:3] are don't care in Alarm
comparison. Only SS[2:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_4 ((uint8_t)0x04) /*!< SS[14:4] are don't care in Alarm
comparison. Only SS[3:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_5 ((uint8_t)0x05) /*!< SS[14:5] are don't care in Alarm
comparison. Only SS[4:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_6 ((uint8_t)0x06) /*!< SS[14:6] are don't care in Alarm
comparison. Only SS[5:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_7 ((uint8_t)0x07) /*!< SS[14:7] are don't care in Alarm
comparison. Only SS[6:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_8 ((uint8_t)0x08) /*!< SS[14:8] are don't care in Alarm
comparison. Only SS[7:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_9 ((uint8_t)0x09) /*!< SS[14:9] are don't care in Alarm
comparison. Only SS[8:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_10 ((uint8_t)0x0A) /*!< SS[14:10] are don't care in Alarm
comparison. Only SS[9:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_11 ((uint8_t)0x0B) /*!< SS[14:11] are don't care in Alarm
comparison. Only SS[10:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_12 ((uint8_t)0x0C) /*!< SS[14:12] are don't care in Alarm
comparison.Only SS[11:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_13 ((uint8_t)0x0D) /*!< SS[14:13] are don't care in Alarm
comparison. Only SS[12:0] are compared */
#define RTC_AlarmSubSecondMask_SS14 ((uint8_t)0x0E) /*!< SS[14] is don't care in Alarm
comparison.Only SS[13:0] are compared */
#define RTC_AlarmSubSecondMask_None ((uint8_t)0x0F) /*!< SS[14:0] are compared and must match
to activate alarm. */
#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_AlarmSubSecondMask_All) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_1) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_2) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_3) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_4) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_5) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_6) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_7) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_8) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_9) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_10) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_11) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_12) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_13) || \
((MASK) == RTC_AlarmSubSecondMask_SS14) || \
((MASK) == RTC_AlarmSubSecondMask_None))
/**
* @}
*/
/** @defgroup RTC_Alarm_Sub_Seconds_Value
* @{
*/
#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= 0x00007FFF)
/**
* @}
*/
/** @defgroup RTC_Time_Stamp_Edges_definitions
* @{
*/
#define RTC_TimeStampEdge_Rising ((uint32_t)0x00000000)
#define RTC_TimeStampEdge_Falling ((uint32_t)0x00000008)
#define IS_RTC_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TimeStampEdge_Rising) || \
((EDGE) == RTC_TimeStampEdge_Falling))
/**
* @}
*/
/** @defgroup RTC_Output_selection_Definitions
* @{
*/
#define RTC_Output_Disable ((uint32_t)0x00000000)
#define RTC_Output_AlarmA ((uint32_t)0x00200000)
#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_Output_Disable) || \
((OUTPUT) == RTC_Output_AlarmA))
/**
* @}
*/
/** @defgroup RTC_Output_Polarity_Definitions
* @{
*/
#define RTC_OutputPolarity_High ((uint32_t)0x00000000)
#define RTC_OutputPolarity_Low ((uint32_t)0x00100000)
#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OutputPolarity_High) || \
((POL) == RTC_OutputPolarity_Low))
/**
* @}
*/
/** @defgroup RTC_Calib_Output_selection_Definitions
* @{
*/
#define RTC_CalibOutput_512Hz ((uint32_t)0x00000000)
#define RTC_CalibOutput_1Hz ((uint32_t)0x00080000)
#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CalibOutput_512Hz) || \
((OUTPUT) == RTC_CalibOutput_1Hz))
/**
* @}
*/
/** @defgroup RTC_Smooth_calib_period_Definitions
* @{
*/
#define RTC_SmoothCalibPeriod_32sec ((uint32_t)0x00000000) /*!< if RTCCLK = 32768 Hz, Smooth calibation
period is 32s, else 2exp20 RTCCLK seconds */
#define RTC_SmoothCalibPeriod_16sec ((uint32_t)0x00002000) /*!< if RTCCLK = 32768 Hz, Smooth calibation
period is 16s, else 2exp19 RTCCLK seconds */
#define RTC_SmoothCalibPeriod_8sec ((uint32_t)0x00004000) /*!< if RTCCLK = 32768 Hz, Smooth calibation
period is 8s, else 2exp18 RTCCLK seconds */
#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SmoothCalibPeriod_32sec) || \
((PERIOD) == RTC_SmoothCalibPeriod_16sec) || \
((PERIOD) == RTC_SmoothCalibPeriod_8sec))
/**
* @}
*/
/** @defgroup RTC_Smooth_calib_Plus_pulses_Definitions
* @{
*/
#define RTC_SmoothCalibPlusPulses_Set ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added
during a X -second window = Y - CALM[8:0].
with Y = 512, 256, 128 when X = 32, 16, 8 */
#define RTC_SmoothCalibPlusPulses_Reset ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
during a 32-second window = CALM[8:0]. */
#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SmoothCalibPlusPulses_Set) || \
((PLUS) == RTC_SmoothCalibPlusPulses_Reset))
/**
* @}
*/
/** @defgroup RTC_Smooth_calib_Minus_pulses_Definitions
* @{
*/
#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
/**
* @}
*/
/** @defgroup RTC_DayLightSaving_Definitions
* @{
*/
#define RTC_DayLightSaving_SUB1H ((uint32_t)0x00020000)
#define RTC_DayLightSaving_ADD1H ((uint32_t)0x00010000)
#define IS_RTC_DAYLIGHT_SAVING(SAVING) (((SAVING) == RTC_DayLightSaving_SUB1H) || \
((SAVING) == RTC_DayLightSaving_ADD1H))
#define RTC_StoreOperation_Reset ((uint32_t)0x00000000)
#define RTC_StoreOperation_Set ((uint32_t)0x00040000)
#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_StoreOperation_Reset) || \
((OPERATION) == RTC_StoreOperation_Set))
/**
* @}
*/
/** @defgroup RTC_Tamper_Trigger_Definitions
* @{
*/
#define RTC_TamperTrigger_RisingEdge ((uint32_t)0x00000000)
#define RTC_TamperTrigger_FallingEdge ((uint32_t)0x00000001)
#define RTC_TamperTrigger_LowLevel ((uint32_t)0x00000000)
#define RTC_TamperTrigger_HighLevel ((uint32_t)0x00000001)
#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TamperTrigger_RisingEdge) || \
((TRIGGER) == RTC_TamperTrigger_FallingEdge) || \
((TRIGGER) == RTC_TamperTrigger_LowLevel) || \
((TRIGGER) == RTC_TamperTrigger_HighLevel))
/**
* @}
*/
/** @defgroup RTC_Tamper_Filter_Definitions
* @{
*/
#define RTC_TamperFilter_Disable ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
#define RTC_TamperFilter_2Sample ((uint32_t)0x00000800) /*!< Tamper is activated after 2
consecutive samples at the active level */
#define RTC_TamperFilter_4Sample ((uint32_t)0x00001000) /*!< Tamper is activated after 4
consecutive samples at the active level */
#define RTC_TamperFilter_8Sample ((uint32_t)0x00001800) /*!< Tamper is activated after 8
consecutive samples at the active leve. */
#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TamperFilter_Disable) || \
((FILTER) == RTC_TamperFilter_2Sample) || \
((FILTER) == RTC_TamperFilter_4Sample) || \
((FILTER) == RTC_TamperFilter_8Sample))
/**
* @}
*/
/** @defgroup RTC_Tamper_Sampling_Frequencies_Definitions
* @{
*/
#define RTC_TamperSamplingFreq_RTCCLK_Div32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 32768 */
#define RTC_TamperSamplingFreq_RTCCLK_Div16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 16384 */
#define RTC_TamperSamplingFreq_RTCCLK_Div8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 8192 */
#define RTC_TamperSamplingFreq_RTCCLK_Div4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 4096 */
#define RTC_TamperSamplingFreq_RTCCLK_Div2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 2048 */
#define RTC_TamperSamplingFreq_RTCCLK_Div1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 1024 */
#define RTC_TamperSamplingFreq_RTCCLK_Div512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 512 */
#define RTC_TamperSamplingFreq_RTCCLK_Div256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -