stm32f0xx_it.c

来自「stm32f0固件库」· C语言 代码 · 共 181 行

/**
  ******************************************************************************
  * @file    RCC/stm32f0xx_it.c 
  * @author  MCD Application Team
  * @version V1.0.0
  * @date    23-March-2012
  * @brief   Main Interrupt Service Routines.
  *          This file provides template for all exceptions handler and 
  *          peripherals interrupt service routine.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
  *
  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *        http://www.st.com/software_license_agreement_liberty_v2
  *
  * Unless required by applicable law or agreed to in writing, software 
  * distributed under the License is distributed on an "AS IS" BASIS, 
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
  ******************************************************************************
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_it.h"
#include "main.h"

/** @addtogroup STM32F0_Discovery_Peripheral_Examples
  * @{
  */

/** @addtogroup RCC_Example
  * @{
  */ 

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/

/******************************************************************************/
/*            Cortex-M0 Processor Exceptions Handlers                         */
/******************************************************************************/

/**
  * @brief  This function handles NMI exception.
  * @param  None
  * @retval None
  */
void NMI_Handler(void)
{
  /* This interrupt is generated when HSE clock fails */

  if (RCC_GetITStatus(RCC_IT_CSS) != RESET)
  {
    /* At this stage: HSE, PLL are disabled (but no change on PLL config) and HSI
       is selected as system clock source */

    /* Enable HSE */
    RCC_HSEConfig(RCC_HSE_ON);

    /* Enable HSE Ready and PLL Ready interrupts */
    RCC_ITConfig(RCC_IT_HSERDY | RCC_IT_PLLRDY, ENABLE);

    /* Clear Clock Security System interrupt pending bit */
    RCC_ClearITPendingBit(RCC_IT_CSS);

    /* Once HSE clock recover, the HSERDY interrupt is generated and in the RCC ISR
       routine the system clock will be reconfigured to its previous state (before
       HSE clock failure) */
  }
}

/**
  * @brief  This function handles Hard Fault exception.
  * @param  None
  * @retval None
  */
void HardFault_Handler(void)
{
  /* Go to infinite loop when Hard Fault exception occurs */
  while (1)
  {
  }
}

/**
  * @brief  This function handles SVCall exception.
  * @param  None
  * @retval None
  */
void SVC_Handler(void)
{
}

/**
  * @brief  This function handles PendSVC exception.
  * @param  None
  * @retval None
  */
void PendSV_Handler(void)
{
}

/**
  * @brief  This function handles SysTick Handler.
  * @param  None
  * @retval None
  */
void SysTick_Handler(void)
{
}

/******************************************************************************/
/*                 STM32F0xx Peripherals Interrupt Handlers                   */
/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
/*  available peripheral interrupt handler's name please refer to the startup */
/*  file (startup_stm32f0xx.s).                                            */
/******************************************************************************/

/**
  * @brief  This function handles PPP interrupt request.
  * @param  None
  * @retval None
  */
/*void PPP_IRQHandler(void)
{
}*/

/**
  * @brief  This function handles RCC interrupt request. 
  * @param  None
  * @retval None
  */
void RCC_IRQHandler(void)
{
  if(RCC_GetITStatus(RCC_IT_HSERDY) != RESET)
  { 
    /* Clear HSERDY interrupt pending bit */
    RCC_ClearITPendingBit(RCC_IT_HSERDY);

    /* Check if the HSE clock is still available */
    if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET)
    { 
      /* Enable PLL: once the PLL is ready the PLLRDY interrupt is generated */ 
      RCC_PLLCmd(ENABLE);     
    }
  }

  if(RCC_GetITStatus(RCC_IT_PLLRDY) != RESET)
  { 
    /* Clear PLLRDY interrupt pending bit */
    RCC_ClearITPendingBit(RCC_IT_PLLRDY);

    /* Check if the PLL is still locked */
    if (RCC_GetFlagStatus(RCC_FLAG_PLLRDY) != RESET)
    { 
      /* Select PLL as system clock source */
      RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
    }
  }
}

/**
  * @}
  */ 

/**
  * @}
  */ 

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/