main.c

stm32f0固件库

/**
  ******************************************************************************
  * @file    DMA_RAM_DAC/main.c  
  * @author  MCD Application Team
  * @version V1.0.0
  * @date    23-March-2012
  * @brief   Main program body
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
  *
  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *        http://www.st.com/software_license_agreement_liberty_v2
  *
  * Unless required by applicable law or agreed to in writing, software 
  * distributed under the License is distributed on an "AS IS" BASIS, 
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"

/** @addtogroup STM32F0_Discovery_Peripheral_Examples
  * @{
  */

/** @addtogroup DMA_RAM_DAC
  * @{
  */

/* Private typedef -----------------------------------------------------------*/
DAC_InitTypeDef   DAC_InitStructure;
DMA_InitTypeDef   DMA_InitStructure;
GPIO_InitTypeDef  GPIO_InitStructure;

/* Private define ------------------------------------------------------------*/
#define DAC_DHR12R_Address      0x40007408

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
uint16_t Sine12bit[32] = {
                      2047, 2447, 2831, 3185, 3498, 3750, 3939, 4056, 4095, 4056,
                      3939, 3750, 3495, 3185, 2831, 2447, 2047, 1647, 1263, 909, 
                      599, 344, 155, 38, 0, 38, 155, 344, 599, 909, 1263, 1647};


/* Private function prototypes -----------------------------------------------*/
void TIM_Config(void);
void DAC_Config(void);
void DMA_Config(void);

/* Private functions ---------------------------------------------------------*/

/**
  * @brief  Main program.
  * @param  None
  * @retval None
  */
int main(void)
{
  /*!< At this stage the microcontroller clock setting is already configured, 
       this is done through SystemInit() function which is called from startup
       file (startup_stm32f0xx.s) before to branch to application main.
       To reconfigure the default setting of SystemInit() function, refer to
       system_stm32f0xx.c file
     */ 

  /* DMA1 channel3 configuration: Sine12bit is used as memory base address */
  DMA_Config();

  /* DAC configuration ------------------------------------------------------*/
  DAC_Config();

  /* TIM2 configuration ------------------------------------------------------*/
  TIM_Config();

  while (1)
  {
  }
}

/**
  * @brief  Configures the TIM2
  * @param  None
  * @retval None
  */
void TIM_Config(void)
{
  TIM_TimeBaseInitTypeDef    TIM_TimeBaseStructure;

  /* TIM2 Periph clock enable */
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);

  /* Time base configuration */
  TIM_TimeBaseStructInit(&TIM_TimeBaseStructure); 
  TIM_TimeBaseStructure.TIM_Period = 48;         
  TIM_TimeBaseStructure.TIM_Prescaler = 0x0;       
  TIM_TimeBaseStructure.TIM_ClockDivision = 0x0;    
  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;  
  TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);

  /* TIM2 TRGO selection: update event is selected as trigger for DAC */
  TIM_SelectOutputTrigger(TIM2, TIM_TRGOSource_Update);

  /* TIM2 enable counter */
  TIM_Cmd(TIM2, ENABLE);
}

/**
  * @brief  Configures DAC channel 1
  * @param  None
  * @retval None
  */
void DAC_Config(void)
{
  /* Enable GPIOA Periph clock --------------------------------------*/
  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
  
  /* Configure PA.04 DAC_OUT as analog */
  GPIO_InitStructure.GPIO_Pin =  GPIO_Pin_4 ;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN;
  GPIO_Init(GPIOA, &GPIO_InitStructure);

  /* DAC Periph clock enable */
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);

  /* Fill DAC InitStructure */
  DAC_InitStructure.DAC_Trigger = DAC_Trigger_T2_TRGO;
  DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Disable;

  /* DAC channel1 Configuration */
  DAC_Init(DAC_Channel_1, &DAC_InitStructure);

  /* Enable DAC Channel1: Once the DAC channel1 is enabled, PA.04 is 
     automatically connected to the DAC converter. */
  DAC_Cmd(DAC_Channel_1, ENABLE);

  /* Enable DMA for DAC Channel2 */
  DAC_DMACmd(DAC_Channel_1, ENABLE);
}

/**
  * @brief  Configures DMA1 channel3
  * @param  None
  * @retval None
  */
void DMA_Config(void)
{
  /* Enable DMA1 clock -------------------------------------------------------*/
  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);

  DMA_DeInit(DMA1_Channel3);
  DMA_InitStructure.DMA_PeripheralBaseAddr = DAC_DHR12R_Address;
  DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)&Sine12bit;
  DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
  DMA_InitStructure.DMA_BufferSize = 32;
  DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
  DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
  DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
  DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
  DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
  DMA_InitStructure.DMA_Priority = DMA_Priority_High;
  DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
  DMA_Init(DMA1_Channel3, &DMA_InitStructure);

  /* Enable DMA1 Channel3 */
  DMA_Cmd(DMA1_Channel3, ENABLE);
}

#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}
#endif

/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/