stm8s_it.c

STM8s

  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void TIM5_UPD_OVF_BRK_TRG_IRQHandler(void)
#else /* _RAISONANCE_ */
void TIM5_UPD_OVF_BRK_TRG_IRQHandler(void) interrupt 13
#endif /* _COSMIC_ */
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
}
/**
  * @brief Timer5 Capture/Compare Interruption routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void TIM5_CAP_COM_IRQHandler(void)
#else /* _RAISONANCE_ */
void TIM5_CAP_COM_IRQHandler(void) interrupt 14
#endif /* _COSMIC_ */
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
}

#else /*STM8S208, STM8S207, STM8S105 or STM8S103*/
/**
  * @brief Timer2 Update/Overflow/Break Interruption routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void TIM2_UPD_OVF_BRK_IRQHandler(void)
#else /* _RAISONANCE_ */
void TIM2_UPD_OVF_BRK_IRQHandler(void) interrupt 13
#endif /* _COSMIC_ */
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
}

/**
  * @brief Timer2 Capture/Compare Interruption routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void TIM2_CAP_COM_IRQHandler(void)
#else /* _RAISONANCE_ */
void TIM2_CAP_COM_IRQHandler(void) interrupt 14
#endif /* _COSMIC_ */
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
	//TIM2->SR1 &=~(0X01);
}
#endif /*STM8S903*/

#if defined (STM8S208) || defined(STM8S207) || defined(STM8S105)
/**
  * @brief Timer3 Update/Overflow/Break Interruption routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void TIM3_UPD_OVF_BRK_IRQHandler(void)
#else /* _RAISONANCE_ */
void TIM3_UPD_OVF_BRK_IRQHandler(void) interrupt 15
#endif /* _COSMIC_ */
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
}

/**
  * @brief Timer3 Capture/Compare Interruption routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void TIM3_CAP_COM_IRQHandler(void)
#else /* _RAISONANCE_ */
void TIM3_CAP_COM_IRQHandler(void) interrupt 16
#endif /* _COSMIC_ */
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
}
#endif /*STM8S208, STM8S207 or STM8S105*/

#ifndef STM8S105
/**
  * @brief UART1 TX Interruption routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void UART1_TX_IRQHandler(void)
#else /* _RAISONANCE_ */
void UART1_TX_IRQHandler(void) interrupt 17
#endif /* _COSMIC_ */
{
    /* In order to detect unexpected events during development,
       it is recommended to set a breakpoint on the following instruction.
    */
}

/**
  * @brief UART1 RX Interruption routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void UART1_RX_IRQHandler(void)
#else /* _RAISONANCE_ */
void UART1_RX_IRQHandler(void) interrupt 18
#endif /* _COSMIC_ */
{
    /* In order to detect unexpected events during development,
       it is recommended to set a breakpoint on the following instruction.
    */
}
#endif /*STM8S105*/

/**
  * @brief I2C Interruption routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void I2C_IRQHandler(void)
#else /* _RAISONANCE_ */
void I2C_IRQHandler(void) interrupt 19
#endif /* _COSMIC_ */
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
}

#ifdef STM8S105
/**
  * @brief UART2 TX interrupt routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void UART2_TX_IRQHandler(void)
#else /* _RAISONANCE_ */
void UART2_TX_IRQHandler(void) interrupt 20
#endif /* _COSMIC_ */
{
    /* In order to detect unexpected events during development,
       it is recommended to set a breakpoint on the following instruction.
    */
}

/**
  * @brief UART2 RX interrupt routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void UART2_RX_IRQHandler(void)
#else /* _RAISONANCE_ */
void UART2_RX_IRQHandler(void) interrupt 21
#endif /* _COSMIC_ */
{
    /* In order to detect unexpected events during development,
       it is recommended to set a breakpoint on the following instruction.
    */
}
#endif /* STM8S105*/

#if defined(STM8S207) || defined(STM8S208)
/**
  * @brief UART3 TX interrupt routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void UART3_TX_IRQHandler(void)
#else /* _RAISONANCE_ */
void UART3_TX_IRQHandler(void) interrupt 20
#endif /* _COSMIC_ */
{
    /* In order to detect unexpected events during development,
       it is recommended to set a breakpoint on the following instruction.
    */
}

/**
  * @brief UART3 RX interrupt routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void UART3_RX_IRQHandler(void)
#else /* _RAISONANCE_ */
void UART3_RX_IRQHandler(void) interrupt 21
#endif /* _COSMIC_ */
{
    /* In order to detect unexpected events during development,
       it is recommended to set a breakpoint on the following instruction.
    */
}
#endif /*STM8S208 or STM8S207*/

#if defined(STM8S207) || defined(STM8S208)
/**
  * @brief ADC2 interrupt routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void ADC2_IRQHandler(void)
#else /* _RAISONANCE_ */
void ADC2_IRQHandler(void) interrupt 22
#endif /* _COSMIC_ */
{
    /* In order to detect unexpected events during development,
       it is recommended to set a breakpoint on the following instruction.
    */
}
#else /*STM8S105, STM8S103 or STM8S903*/
/**
  * @brief ADC1 interrupt routine.
  * @par Parameters:
  * None
  * @retval 
  * None
  */
#ifdef _COSMIC_
@far @interrupt void ADC1_IRQHandler(void)
#else /* _RAISONANCE_ */
void ADC1_IRQHandler(void) interrupt 22
#endif /* _COSMIC_ */
{
    /* In order to detect unexpected events during development,
       it is recommended to set a breakpoint on the following instruction.
    */
}
#endif /*STM8S208 or STM8S207*/

#ifdef STM8S903
/**
  * @brief Timer6 Update/Overflow/Trigger Interruption routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void TIM6_UPD_OVF_TRG_IRQHandler(void)
#else /* _RAISONANCE_ */
void TIM6_UPD_OVF_TRG_IRQHandler(void) interrupt 23
#endif /* _COSMIC_ */
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
}
#else /*STM8S208, STM8S207, STM8S105 or STM8S103*/
/**
  * @brief Timer4 Update/Overflow Interruption routine.
  * @par Parameters:
  * None
  * @retval
  * None
  */
#ifdef _COSMIC_
@far @interrupt void TIM4_UPD_OVF_IRQHandler(void)
#else /* _RAISONANCE_ */
void TIM4_UPD_OVF_IRQHandler(void) interrupt 23
#endif /* _COSMIC_ */
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
}
#endif /*STM8S903*/

/**
  * @brief Eeprom EEC Interruption routine.
  * @par Parameters:
  * None
  * @retval
	* None
  */
#ifdef _COSMIC_
@far @interrupt void EEPROM_EEC_IRQHandler(void)
#else /* _RAISONANCE_ */
void EEPROM_EEC_IRQHandler(void) interrupt 24
#endif /* _COSMIC_ */
{
  /* In order to detect unexpected events during development,
     it is recommended to set a breakpoint on the following instruction.
  */
}

/**
  * @}
  */

/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/