main.c

STM32所有外设例子程序（需自己修改）

/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
* File Name          : main.c
* Author             : MCD Application Team
* Version            : V2.0.1
* Date               : 06/13/2008
* Description        : Main program body.
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_lib.h"
#include "platform_config.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
ErrorStatus HSEStartUpStatus;

/* Private function prototypes -----------------------------------------------*/
void RCC_Configuration(void);
void NVIC_Configuration(void);
void GPIO_Configuration(void);
void EXTI_Configuration(void);
void SysTick_Configuration(void);
void Delay(vu32 nCount);

/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name  : main
* Description    : Main program.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
int main(void)
{
#ifdef DEBUG
  debug();
#endif

  /* System Clocks Configuration */
  RCC_Configuration();

  /* GPIO configuration */
  GPIO_Configuration();

  /* Check if the system has resumed from IWDG reset */
  if (RCC_GetFlagStatus(RCC_FLAG_IWDGRST) != RESET)
  {/* IWDGRST flag set */
    /* Set GPIO_LED pin 6 */
    GPIO_SetBits(GPIO_LED, GPIO_Pin_6);

    /* Clear reset flags */
    RCC_ClearFlag();
  }
  else
  {/* IWDGRST flag is not set */
    /* Reset GPIO_LED pin 6 */
    GPIO_ResetBits(GPIO_LED, GPIO_Pin_6);
  }

  /* Configure Key Button EXTI Line to generate an interrupt on falling edge */
  EXTI_Configuration();

  /* NVIC configuration */
  NVIC_Configuration();

  /* Configure SysTick to generate an interrupt each 250ms */
  SysTick_Configuration();

  /* IWDG timeout equal to 280 ms (the timeout may varies due to LSI frequency
     dispersion) */
  /* Enable write access to IWDG_PR and IWDG_RLR registers */
  IWDG_WriteAccessCmd(IWDG_WriteAccess_Enable);

  /* IWDG counter clock: 40KHz(LSI) / 32 = 1.25 KHz */
  IWDG_SetPrescaler(IWDG_Prescaler_32);

  /* Set counter reload value to 349 */
  IWDG_SetReload(349);

  /* Reload IWDG counter */
  IWDG_ReloadCounter();

  /* Enable IWDG (the LSI oscillator will be enabled by hardware) */
  IWDG_Enable();

  while (1)
  {}
}

/*******************************************************************************
* Function Name  : RCC_Configuration
* Description    : Configures the different system clocks.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_Configuration(void)
{
  /* RCC system reset(for debug purpose) */
  RCC_DeInit();

  /* Enable HSE */
  RCC_HSEConfig(RCC_HSE_ON);

  /* Wait till HSE is ready */
  HSEStartUpStatus = RCC_WaitForHSEStartUp();

  if (HSEStartUpStatus == SUCCESS)
  {
    /* Enable Prefetch Buffer */
    FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);

    /* Flash 0 wait state */
    FLASH_SetLatency(FLASH_Latency_0);

    /* HCLK = SYSCLK */
    RCC_HCLKConfig(RCC_SYSCLK_Div1);

    /* PCLK2 = HCLK */
    RCC_PCLK2Config(RCC_HCLK_Div1);

    /* PCLK1 = HCLK */
    RCC_PCLK1Config(RCC_HCLK_Div1);

    /* Select HSE as system clock source */
    RCC_SYSCLKConfig(RCC_SYSCLKSource_HSE);

    /* Wait till HSE is used as system clock source */
    while (RCC_GetSYSCLKSource() != 0x04)
    {}
  }

  /* Enable Key Button GPIO Port, GPIO_LED and AFIO clock */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIO_KEY_BUTTON | RCC_APB2Periph_GPIO_LED
                         | RCC_APB2Periph_AFIO, ENABLE);
}

/*******************************************************************************
* Function Name  : GPIO_Configuration
* Description    : Configures the different GPIO ports.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void GPIO_Configuration(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;

  /* Configure GPIO_LED pin 6 and pin 7 as Output push-pull */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_Init(GPIO_LED, &GPIO_InitStructure);

  /* Configure Key Button GPIO Pin as input floating (Key Button EXTI Line) */
  GPIO_InitStructure.GPIO_Pin = GPIO_PIN_KEY_BUTTON;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
  GPIO_Init(GPIO_KEY_BUTTON, &GPIO_InitStructure);
}

/*******************************************************************************
* Function Name  : EXTI_Configuration
* Description    : Configures EXTI Line9.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void EXTI_Configuration(void)
{
  EXTI_InitTypeDef EXTI_InitStructure;

  /* Connect Key Button EXTI Line to Key Button GPIO Pin */
  GPIO_EXTILineConfig(GPIO_PORT_SOURCE_KEY_BUTTON, GPIO_PIN_SOURCE_KEY_BUTTON);

  /* Configure Key Button EXTI Line to generate an interrupt on falling edge */
  EXTI_ClearITPendingBit(EXTI_LINE_KEY_BUTTON);
  EXTI_InitStructure.EXTI_Line = EXTI_LINE_KEY_BUTTON;
  EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
  EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;
  EXTI_InitStructure.EXTI_LineCmd = ENABLE;
  EXTI_Init(&EXTI_InitStructure);
}

/*******************************************************************************
* Function Name  : NVIC_Configuration
* Description    : Configure the nested vectored interrupt controller.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void NVIC_Configuration(void)
{
  NVIC_InitTypeDef NVIC_InitStructure;

#ifdef  VECT_TAB_RAM
  /* Set the Vector Table base location at 0x20000000 */
  NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0);
#else  /* VECT_TAB_FLASH  */
  /* Set the Vector Table base location at 0x08000000 */
  NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0);
#endif

  /* Configure one bit for preemption priority */
  NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);

  /* Enable the EXTI9_5 Interrupt */
  NVIC_InitStructure.NVIC_IRQChannel = EXTI9_5_IRQChannel;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);

  /* Set SysTick interrupt vector Preemption Priority to 1 */
  NVIC_SystemHandlerPriorityConfig(SystemHandler_SysTick, 1, 0);
}

/*******************************************************************************
* Function Name  : Delay
* Description    : Inserts a delay time.
* Input          : nCount: specifies the delay time length.
* Output         : None
* Return         : None
*******************************************************************************/
void Delay(vu32 nCount)
{
  for (; nCount != 0; nCount--);
}

#ifdef  DEBUG
/*******************************************************************************
* Function Name  : assert_failed
* Description    : Reports the name of the source file and the source line number
*                  where the assert_param error has occurred.
* Input          : - file: pointer to the source file name
*                  - line: assert_param error line source number
* Output         : None
* Return         : None
*******************************************************************************/
void assert_failed(u8* file, u32 line)
{
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {}
}
#endif

/*******************************************************************************
* Function Name  : SysTick_Configuration
* Description    : Configures SysTick to generate an interrupt each 250ms.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void SysTick_Configuration(void)
{
  /* Select HCLK/8 as SysTick clock source */
  SysTick_CLKSourceConfig(SysTick_CLKSource_HCLK_Div8);

  /* SysTick interrupt each 250ms with counter clock equal to 1MHz */
  SysTick_SetReload(250000);

  /* Enable the SysTick Counter */
  SysTick_CounterCmd(SysTick_Counter_Enable);

  /* Enable the SysTick Interrupt */
  SysTick_ITConfig(ENABLE);
}

/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/