micro_dynamic_target_for_4_virtex.c

Xilinx Jtag Configuration source code, Support *.xsvf file

* Parameters:   pucTapState         - Current TAP state.
*               lShiftLengthBits    - number of bits to shift.
*               sShiftLengthBytes   - number of bytes to read.
*               plvTdi              - ptr to lenval for TDI data.
*               lvTdoCaptured       - ptr to lenval for storing TDO data.
*               iEndState           - state in which to end the shift.
*               lRunTestTime        - amount of time to wait after the shift.
*               ucMaxRepeat         - maximum xc9500/xl retries.
*               iHeader             - Num. of header bits to shift before data.
*               iTrailer            - Num. of trailer bits to shift after data.
* Returns:      int                 - 0 = success; otherwise TDO mismatch.
*****************************************************************************/
int xsvfBasicXSDRTDO( unsigned char*    pucTapState,
                      long              lShiftLengthBits,
                      short             sShiftLengthBytes,
                      lenVal*           plvTdi,
                      lenVal*           plvTdoCaptured,
                      lenVal*           plvTdoExpected,
                      lenVal*           plvTdoMask,
                      unsigned char     ucEndState,
                      long              lRunTestTime,
                      unsigned char     ucMaxRepeat,
                      int               iHeader,
                      int               iTrailer )
{
    readVal( plvTdi, sShiftLengthBytes );
    if ( plvTdoExpected )
    {
        readVal( plvTdoExpected, sShiftLengthBytes );
    }
    return( xsvfShift( pucTapState, XTAPSTATE_SHIFTDR, lShiftLengthBits,
                       plvTdi, plvTdoCaptured, plvTdoExpected, plvTdoMask,
                       ucEndState, lRunTestTime, ucMaxRepeat,
                       iHeader, iTrailer ) );
}

/*****************************************************************************
* Function:     xsvfDoSDRMasking
* Description:  Update the data value with the next XSDRINC data and address.
* Example:      dataVal=0x01ff, nextData=0xab, addressMask=0x0100,
*               dataMask=0x00ff, should set dataVal to 0x02ab
* Parameters:   plvTdi          - The current TDI value.
*               plvNextData     - the next data value.
*               plvAddressMask  - the address mask.
*               plvDataMask     - the data mask.
* Returns:      void.
*****************************************************************************/
#ifdef  XSVF_SUPPORT_COMPRESSION
void xsvfDoSDRMasking( lenVal*  plvTdi,
                       lenVal*  plvNextData,
                       lenVal*  plvAddressMask,
                       lenVal*  plvDataMask )
{
    int             i;
    unsigned char   ucTdi;
    unsigned char   ucTdiMask;
    unsigned char   ucDataMask;
    unsigned char   ucNextData;
    unsigned char   ucNextMask;
    short           sNextData;

    /* add the address Mask to dataVal and return as a new dataVal */
    addVal( plvTdi, plvTdi, plvAddressMask );

    ucNextData  = 0;
    ucNextMask  = 0;
    sNextData   = plvNextData->len;
    for ( i = plvDataMask->len - 1; i >= 0; --i )
    {
        /* Go through data mask in reverse order looking for mask (1) bits */
        ucDataMask  = plvDataMask->val[ i ];
        if ( ucDataMask )
        {
            /* Retrieve the corresponding TDI byte value */
            ucTdi       = plvTdi->val[ i ];

            /* For each bit in the data mask byte, look for 1's */
            ucTdiMask   = 1;
            while ( ucDataMask )
            {
                if ( ucDataMask & 1 )
                {
                    if ( !ucNextMask )
                    {
                        /* Get the next data byte */
                        ucNextData  = plvNextData->val[ --sNextData ];
                        ucNextMask  = 1;
                    }

                    /* Set or clear the data bit according to the next data */
                    if ( ucNextData & ucNextMask )
                    {
                        ucTdi   |= ucTdiMask;       /* Set bit */
                    }
                    else
                    {
                        ucTdi   &= ( ~ucTdiMask );  /* Clear bit */
                    }

                    /* Update the next data */
                    ucNextMask  <<= 1;
                }
                ucTdiMask   <<= 1;
                ucDataMask  >>= 1;
            }

            /* Update the TDI value */
            plvTdi->val[ i ]    = ucTdi;
        }
    }
}
#endif  /* XSVF_SUPPORT_COMPRESSION */

/*============================================================================
* XSVF Command Functions (type = TXsvfDoCmdFuncPtr)
* These functions update pXsvfInfo->iErrorCode only on an error.
* Otherwise, the error code is left alone.
* The function returns the error code from the function.
============================================================================*/

/*****************************************************************************
* Function:     xsvfDoIllegalCmd
* Description:  Function place holder for illegal/unsupported commands.
* Parameters:   pXsvfInfo   - XSVF information pointer.
* Returns:      int         - 0 = success;  non-zero = error.
*****************************************************************************/
int xsvfDoIllegalCmd( SXsvfInfo* pXsvfInfo )
{
    XSVFDBG_PRINTF2( 0, "ERROR:  Encountered unsupported command #%d (%s)\n",
                     ((unsigned int)(pXsvfInfo->ucCommand)),
                     ((pXsvfInfo->ucCommand < XLASTCMD)
                      ? (xsvf_pzCommandName[pXsvfInfo->ucCommand])
                      : "Unknown") );
    pXsvfInfo->iErrorCode   = XSVF_ERROR_ILLEGALCMD;
    return( pXsvfInfo->iErrorCode );
}

/*****************************************************************************
* Function:     xsvfDoXCOMPLETE
* Description:  XCOMPLETE (no parameters)
*               Update complete status for XSVF player.
* Parameters:   pXsvfInfo   - XSVF information pointer.
* Returns:      int         - 0 = success;  non-zero = error.
*****************************************************************************/
int xsvfDoXCOMPLETE( SXsvfInfo* pXsvfInfo )
{
    pXsvfInfo->ucComplete   = 1;
    return( XSVF_ERROR_NONE );
}

/*****************************************************************************
* Function:     xsvfDoXTDOMASK
* Description:  XTDOMASK <lenVal.TdoMask[XSDRSIZE]>
*               Prespecify the TDO compare mask.
* Parameters:   pXsvfInfo   - XSVF information pointer.
* Returns:      int         - 0 = success;  non-zero = error.
*****************************************************************************/
int xsvfDoXTDOMASK( SXsvfInfo* pXsvfInfo )
{
    readVal( &(pXsvfInfo->lvTdoMask), pXsvfInfo->sShiftLengthBytes );
    XSVFDBG_PRINTF( 4, "    TDO Mask     = ");
    XSVFDBG_PRINTLENVAL( 4, &(pXsvfInfo->lvTdoMask) );
    XSVFDBG_PRINTF( 4, "\n");
    return( XSVF_ERROR_NONE );
}

/*****************************************************************************
* Function:     xsvfDoXSIR
* Description:  XSIR <(byte)shiftlen> <lenVal.TDI[shiftlen]>
*               Get the instruction and shift the instruction into the TAP.
*               If prespecified XRUNTEST!=0, goto RUNTEST and wait after
*               the shift for XRUNTEST usec.
* Parameters:   pXsvfInfo   - XSVF information pointer.
* Returns:      int         - 0 = success;  non-zero = error.
*****************************************************************************/
int xsvfDoXSIR( SXsvfInfo* pXsvfInfo )
{
    unsigned char   ucShiftIrBits;
    short           sShiftIrBytes;
    int             iErrorCode;

    /* Get the shift length and store */
    readByte( &ucShiftIrBits );
    sShiftIrBytes   = xsvfGetAsNumBytes( ucShiftIrBits );
    XSVFDBG_PRINTF1( 3, "   XSIR length = %d\n",
                     ((unsigned int)ucShiftIrBits) );

    if ( sShiftIrBytes > MAX_LEN )
    {
        iErrorCode  = XSVF_ERROR_DATAOVERFLOW;
    }
    else
    {
        /* Get and store instruction to shift in */
        readVal( &(pXsvfInfo->lvTdi), xsvfGetAsNumBytes( ucShiftIrBits ) );

        /* Shift the data */
        iErrorCode  = xsvfShift( &(pXsvfInfo->ucTapState), XTAPSTATE_SHIFTIR,
                                 ucShiftIrBits, &(pXsvfInfo->lvTdi),
                                 /*plvTdoCaptured*/0, /*plvTdoExpected*/0,
                                 /*plvTdoMask*/0, pXsvfInfo->ucEndIR,
                                 pXsvfInfo->lRunTestTime, /*ucMaxRepeat*/0,
                                 pXsvfInfo->iHir, pXsvfInfo->iTir );
    }

    if ( iErrorCode != XSVF_ERROR_NONE )
    {
        pXsvfInfo->iErrorCode   = iErrorCode;
    }
    return( iErrorCode );
}

/*****************************************************************************
* Function:     xsvfDoXSIR2
* Description:  XSIR <(2-byte)shiftlen> <lenVal.TDI[shiftlen]>
*               Get the instruction and shift the instruction into the TAP.
*               If prespecified XRUNTEST!=0, goto RUNTEST and wait after
*               the shift for XRUNTEST usec.
* Parameters:   pXsvfInfo   - XSVF information pointer.
* Returns:      int         - 0 = success;  non-zero = error.
*****************************************************************************/
int xsvfDoXSIR2( SXsvfInfo* pXsvfInfo )
{
    long            lShiftIrBits;
    short           sShiftIrBytes;
    int             iErrorCode;

    /* Get the shift length and store */
    readVal( &(pXsvfInfo->lvTdi), 2 );
    lShiftIrBits    = value( &(pXsvfInfo->lvTdi) );
    sShiftIrBytes   = xsvfGetAsNumBytes( lShiftIrBits );
    XSVFDBG_PRINTF1( 3, "   XSIR2 length = %d\n", lShiftIrBits);

    if ( sShiftIrBytes > MAX_LEN )
    {
        iErrorCode  = XSVF_ERROR_DATAOVERFLOW;
    }
    else
    {
        /* Get and store instruction to shift in */
        readVal( &(pXsvfInfo->lvTdi), xsvfGetAsNumBytes( lShiftIrBits ) );

        /* Shift the data */
        iErrorCode  = xsvfShift( &(pXsvfInfo->ucTapState), XTAPSTATE_SHIFTIR,
                                 lShiftIrBits, &(pXsvfInfo->lvTdi),
                                 /*plvTdoCaptured*/0, /*plvTdoExpected*/0,
                                 /*plvTdoMask*/0, pXsvfInfo->ucEndIR,
                                 pXsvfInfo->lRunTestTime, /*ucMaxRepeat*/0,
                                 pXsvfInfo->iHir, pXsvfInfo->iTir );
    }

    if ( iErrorCode != XSVF_ERROR_NONE )
    {
        pXsvfInfo->iErrorCode   = iErrorCode;
    }
    return( iErrorCode );
}

/*****************************************************************************
* Function:     xsvfDoXSDR
* Description:  XSDR <lenVal.TDI[XSDRSIZE]>
*               Shift the given TDI data into the JTAG scan chain.
*               Compare the captured TDO with the expected TDO from the
*               previous XSDRTDO command using the previously specified
*               XTDOMASK.
* Parameters:   pXsvfInfo   - XSVF information pointer.
* Returns:      int         - 0 = success;  non-zero = error.
*****************************************************************************/
int xsvfDoXSDR( SXsvfInfo* pXsvfInfo )
{
    int iErrorCode;
    readVal( &(pXsvfInfo->lvTdi), pXsvfInfo->sShiftLengthBytes );
    /* use TDOExpected from last XSDRTDO instruction */
    iErrorCode  = xsvfShift( &(pXsvfInfo->ucTapState), XTAPSTATE_SHIFTDR,
                             pXsvfInfo->lShiftLengthBits, &(pXsvfInfo->lvTdi),
                             &(pXsvfInfo->lvTdoCaptured),
                             &(pXsvfInfo->lvTdoExpected),
                             &(pXsvfInfo->lvTdoMask), pXsvfInfo->ucEndDR,
                             pXsvfInfo->lRunTestTime, pXsvfInfo->ucMaxRepeat,
                             pXsvfInfo->iHdr, pXsvfInfo->iTdr );
    if ( iErrorCode != XSVF_ERROR_NONE )
    {
        pXsvfInfo->iErrorCode   = iErrorCode;
    }
    return( iErrorCode );
}

/*****************************************************************************
* Function:     xsvfDoXRUNTEST
* Description:  XRUNTEST <uint32>
*               Prespecify the XRUNTEST wait time for shift operations.
* Parameters:   pXsvfInfo   - XSVF information pointer.
* Returns:      int         - 0 = success;  non-zero = error.
*****************************************************************************/
int xsvfDoXRUNTEST( SXsvfInfo* pXsvfInfo )
{
    readVal( &(pXsvfInfo->lvTdi), 4 );
    pXsvfInfo->lRunTestTime = value( &(pXsvfInfo->lvTdi) );
    XSVFDBG_PRINTF1( 3, "   XRUNTEST = %ld\n", pXsvfInfo->lRunTestTime );
    return( XSVF_ERROR_NONE );
}

/*****************************************************************************
* Function:     xsvfDoXREPEAT
* Description:  XREPEAT <byte>
*               Prespecify the maximum number of XC9500/XL retries.
* Parameters:   pXsvfInfo   - XSVF information pointer.
* Returns:      int         - 0 = success;  non-zero = error.
*****************************************************************************/
int xsvfDoXREPEAT( SXsvfInfo* pXsvfInfo )
{
    readByte( &(pXsvfInfo->ucMaxRepeat) );
    XSVFDBG_PRINTF1( 3, "   XREPEAT = %d\n",
                     ((unsigned int)(pXsvfInfo->ucMaxRepeat)) );
    return( XSVF_ERROR_NONE );
}

/*****************************************************************************
* Function:     xsvfDoXSDRSIZE
* Description:  XSDRSIZE <uint32>
*               Prespecify the XRUNTEST wait time for shift operations.
* Parameters:   pXsvfInfo   - XSVF information pointer.
* Returns:      int         - 0 = success;  non-zero = error.
*****************************************************************************/
int xsvfDoXSDRSIZE( SXsvfInfo* pXsvfInfo )
{