box.tk

openPBS的开放源代码

#         OpenPBS (Portable Batch System) v2.3 Software License
# 
# Copyright (c) 1999-2000 Veridian Information Solutions, Inc.
# All rights reserved.
# 
# ---------------------------------------------------------------------------
# For a license to use or redistribute the OpenPBS software under conditions
# other than those described below, or to purchase support for this software,
# please contact Veridian Systems, PBS Products Department ("Licensor") at:
# 
#    www.OpenPBS.org  [phone]                  [e-mail]
#                        877 902-4PBS (US toll-free)
# ---------------------------------------------------------------------------
# 
# This license covers use of the OpenPBS v2.3 software (the "Software") at
# your site or location, and, for certain users, redistribution of the
# Software to other sites and locations.  Use and redistribution of
# OpenPBS v2.3 in source and binary forms, with or without modification,
# are permitted provided that all of the following conditions are met.
# After December 31, 2001, only conditions 3-6 must be met:
# 
# 1. Commercial and/or non-commercial use of the Software is permitted
#    provided a current software registration is on file at www.OpenPBS.org.
#    If use of this software contributes to a publication, product, or
#    service, proper attribution must be given; see www.OpenPBS.org/credit.html
# 
# 2. Redistribution in any form is only permitted for non-commercial,
#    non-profit purposes.  There can be no charge for the Software or any
#    software incorporating the Software.  Further, there can be no
#    expectation of revenue generated as a consequence of redistributing
#    the Software.
# 
# 3. Any Redistribution of source code must retain the above copyright notice
#    and the acknowledgment contained in paragraph 6, this list of conditions
#    and the disclaimer contained in paragraph 7.
# 
# 4. Any Redistribution in binary form must reproduce the above copyright
#    notice and the acknowledgment contained in paragraph 6, this list of
#    conditions and the disclaimer contained in paragraph 7 in the
#    documentation and/or other materials provided with the distribution.
# 
# 5. Redistributions in any form must be accompanied by information on how to
#    obtain complete source code for the OpenPBS software and any
#    modifications and/or additions to the OpenPBS software.  The source code
#    must either be included in the distribution or be available for no more
#    than the cost of distribution plus a nominal fee, and all modifications
#    and additions to the Software must be freely redistributable by any party
#    (including Licensor) without restriction.
# 
# 6. All advertising materials mentioning features or use of the Software must
#    display the following acknowledgment:
# 
#     "This product includes software developed by NASA Ames Research Center,
#     Lawrence Livermore National Laboratory, and Veridian Information
#     Solutions, Inc.
#     Visit www.OpenPBS.org for OpenPBS software support,
#     products, and information."
# 
# 7. DISCLAIMER OF WARRANTY
# 
# THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. ANY EXPRESS
# OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT
# ARE EXPRESSLY DISCLAIMED.
# 
# IN NO EVENT SHALL VERIDIAN CORPORATION, ITS AFFILIATED COMPANIES, OR THE
# U.S. GOVERNMENT OR ANY OF ITS AGENCIES BE LIABLE FOR ANY DIRECT OR INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
# OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# 
# This license will be governed by the laws of the Commonwealth of Virginia,
# without reference to its choice of law rules.

# NOTE: we restrict to one element keys only for efficiency!
proc box {frame_name {args}} {

  set boxName [string trim $frame_name "."]

  global $boxName canvas sysinfo
  set configure 0

  set argc [llength $args]
  for {set i 0} {$i < $argc} {incr i} {
    switch -exact -- [lindex $args $i] {
      configure  {
                set configure 1
      }
      -title {
                set [set boxName](title) [lindex $args [incr i]]
      }
      title {
		if { ![info exists [set boxName](title)]} {
			return ""
		}
                return [set [set boxName](title)]
      }
      -class {
                set [set boxName](class) [lindex $args [incr i]]
      }
      class {
		if { ![info exists [set boxName](class)]} {
			return Plain
		}
                return [set [set boxName](class)]
      }
      titlelabel {
		if { ![info exists [set boxName](titlelabel)]} {
			return ""
		}
                return [set [set boxName](titlelabel)]
      }		
      -key {
                set [set boxName](key) [lindex $args [incr i]]
      }
      key {
		if { ![info exists [set boxName](key)]} {
			return 0
		}
                return [set [set boxName](key)]
      }
      -entrylabels {
                set [set boxName](entrylabels) [lindex $args [incr i]]
      }
      entrylabels {
		if { ![info exists [set boxName](entrylabels)]} {
			return ""
		}
                return [set [set boxName](entrylabels)]
      }
      -lboxlabels {
                set [set boxName](lboxlabels) [lindex $args [incr i]]
      }
      lboxlabels {
		if { ![info exists [set boxName](lboxlabels)]} {
			return ""
		}
                return [set [set boxName](lboxlabels)]
      }
      -lboxwidths {
                set [set boxName](lboxwidths) [lindex $args [incr i]]
      }
      lboxwidths {
		if { ![info exists [set boxName](lboxwidths)]} {
			return 0
		}
                return [set [set boxName](lboxwidths)]
      }
      -lboxheights {
                set [set boxName](lboxheights) [lindex $args [incr i]]
      }
      lboxheights {
		if { ![info exists [set boxName](lboxheights)]} {
			return 0
		}
                return [set [set boxName](lboxheights)]
      }
      -orient {
                set [set boxName](orient) [lindex $args [incr i]]
      }
      orient {
		if { ![info exists [set boxName](orient)]} {
			return "x"
		}
                return [set [set boxName](orient)]
      }
      -grabBox {
                set [set boxName](grabBox) [lindex $args [incr i]]
      }
      grabBox {
		if { ![info exists [set boxName](grabBox)]} {
			return ""
		}
                return [set [set boxName](grabBox)]
      }
      -selindex {
                set [set boxName](selindex) [lindex $args [incr i]]
      }
      selindex {
		if { ![info exists [set boxName](selindex)]} {
			return -1
		}
                return [set [set boxName](selindex)]
      }
      vscroll {
		if { ![info exists [set boxName](vscroll)]} {
			return ""
		}
                return [set [set boxName](vscroll)]
      }
      ncols {
		if { ![info exists [set boxName](ncols)]} {
			return 1
		}
                return [set [set boxName](ncols)]
      }
      -nrows {
		set lbox [box $frame_name lbox 0]
		if { [string compare $lbox ""] != 0 } {
			set [set boxName](nrows) [$lbox size]
		}

		incr [set boxName](nrows) [lindex $args [incr i]]
                return [set [set boxName](nrows)]
      }
      nrows {
		set lbox [box $frame_name lbox 0]
		if { [string compare $lbox ""] == 0 } {
			return 0
		}
		set [set boxName](nrows) [$lbox size]

                return [set [set boxName](nrows)]
      }
      lbox {
		set index [lindex $args [incr i]]
		if {![info exists [set boxName](lbox,$index)]} {
			return ""
		}
                return [set [set boxName](lbox,$index)]
      }
      entry {
		set index [lindex $args [incr i]]
		if {![info exists [set boxName](entry,$index)]} {
			return ""
		}
                return [set [set boxName](entry,$index)]
      }
      -entryval {
		set index [lindex $args [incr i]]
		set eval [lindex $args [incr i]]
                set [set boxName](entryval,$index) $eval
                return [set [set boxName](entryval,$index)]
      }
      entryval {
		set index [lindex $args [incr i]]
		if {![info exists [set boxName](entryval,$index)]} {
			return ""
		}
                return [set [set boxName](entryval,$index)]
      }
      -entryvalDeleted {
                set [set boxName](entryvalDeleted) [lindex $args [incr i]]
		return
      }
      entryvalDeleted {
		if { ![info exists [set boxName](entryvalDeleted)]} {
			return ""
		}
                return [set [set boxName](entryvalDeleted)]
      }
      -noUpdateButton {
                set [set boxName](noUpdateButton) [lindex $args [incr i]]
      }
      noUpdateButton {
		if { ![info exists [set boxName](noUpdateButton)]} {
			return 0
		}
                return [set [set boxName](noUpdateButton)]
      }
      -addCmd {
                set [set boxName](addCmd) [lindex $args [incr i]]
      }
      addCmd {
		if { ![info exists [set boxName](addCmd)]} {
			return ""
		}
                return [set [set boxName](addCmd)]
      }
      -remCmd {
                set [set boxName](remCmd) [lindex $args [incr i]]
      }
      remCmd {
		if { ![info exists [set boxName](remCmd)]} {
			return ""
		}
                return [set [set boxName](remCmd)]
      }
      updateButton {
		if { ![info exists [set boxName](updateButton)]} {
			return ""
		}
                return [set [set boxName](updateButton)]
      }
      create     {
                catch {unset $boxName}
      }
      unset {
                catch {unset $boxName}
		return
      }
      getBoxArray {
                return "[set boxName]"
      }
    }
  }

  # create one frame to hold everything
  set f [frame $frame_name -class [box $frame_name class]]
  if { ![info exists sysinfo(boxes)] || \
	[lsearch -exact $sysinfo(boxes) $f] == -1 } {
  		lappend sysinfo(boxes) $f
  }

  $f configure -relief ridge -borderwidth 2
  frame $f.t -class CmdFrame -relief raised -borderwidth 2
  frame $f.b -relief flat
  frame $f.b.e -relief flat
  frame $f.b.l -relief ridge -bd 4
  frame $f.b.b -relief flat
  
  label  $f.t.label -text [box $f title] -justify center
  pack $f.t.label -anchor nw -side left -expand 1 -fill both
  set [set boxName](titlelabel) $f.t.label

## build the entry widget 

## build the add button
  button $f.b.e.add -text add -height 2 \
	-command "boxAdd $f \"[box $f addCmd]\""

  if {[string compare [box $f orient] x] == 0} {
  	pack $f.b.e.add -side right -anchor c -pady 1m
  } else {
  	pack $f.b.e.add -side bottom -anchor c -pady 1m
  }
  set k 0
  set packlist ""
  set entrylabels [box $f entrylabels]