linux-2.6.7-quickcam.patch

在Linux下用于webeye的摄像头的驱动

--- linux-2.6.7/drivers/usb/media/Makefile	Fri Jul 23 18:23:09 2004
+++ linux-2.6.7userdev/drivers/usb/media/Makefile	Tue Jul 27 18:12:40 2004
@@ -3,6 +3,7 @@
 #
 
 pwc-objs	:= pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o
+quickcam-objs 	:= qc-driver.o qc-hdcs.o qc-pb0100.o qc-vv6410.o qc-formats.o qc-mjpeg.o qc-memory.o
 
 obj-$(CONFIG_USB_DABUSB)	+= dabusb.o
 obj-$(CONFIG_USB_DSBR)		+= dsbr100.o
@@ -10,6 +11,7 @@
 obj-$(CONFIG_USB_KONICAWC)	+= konicawc.o usbvideo.o
 obj-$(CONFIG_USB_OV511)		+= ov511.o
 obj-$(CONFIG_USB_PWC)		+= pwc.o
+obj-$(CONFIG_USB_QC)		+= quickcam.o
 obj-$(CONFIG_USB_SE401)		+= se401.o
 obj-$(CONFIG_USB_STV680)	+= stv680.o
 obj-$(CONFIG_USB_VICAM)		+= vicam.o usbvideo.o
--- linux-2.6.7/drivers/usb/media/Kconfig	Mon Jul 26 02:31:55 2004
+++ linux-2.6.7userdev/drivers/usb/media/Kconfig	Tue Jul 27 18:00:59 2004
@@ -146,6 +146,34 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called pwc.
 
+config USB_QC
+	tristate "USB Logitech QuickCam Camera support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y or M here if you want to use the Logitech QuickCam Express
+	  cameras. Also some other cameras are supported, such as Dexxa
+	  and Labtec cameras, which are based on ST Microelectronics
+	  VV6410, Hewlett Packard HDCS-1000/1100, Agilent Technologies
+	  HDCS-1020, or Photobit PB-0100/0101 sensor chip.
+	  Easiest way to find out whether a camera is supported is to plug it
+	  in and use "lsusb" to display the VendorId and ProductId values.
+	  For supported cameras, VendorId should be 0x046d and ProductId
+	  one of 0x0840, 0x0850, or 0x0870.
+
+	  This driver has an user space configuration tool, which allows
+	  setting some driver parameters without reloading it (some
+	  parameters can be also set as driver options when loading it).
+	  It is available from <http://qce-ga.sourceforge.net>, along with
+	  more documentation.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" (under Character Devices) to use this driver.
+	  Information on this API and pointers to "v4l" programs may be found
+	  at <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called quickcam.
+
 config USB_SE401
 	tristate "USB SE401 Camera support"
 	depends on USB && VIDEO_DEV
--- linux-2.6.7/drivers/usb/Makefile	Mon Jul 26 02:31:54 2004
+++ linux-2.6.7userdev/drivers/usb/Makefile	Tue Jul 27 23:23:35 2004
@@ -36,6 +36,7 @@
 obj-$(CONFIG_USB_KONICAWC)	+= media/
 obj-$(CONFIG_USB_OV511)		+= media/
 obj-$(CONFIG_USB_PWC)		+= media/
+obj-$(CONFIG_USB_QC)		+= media/
 obj-$(CONFIG_USB_SE401)		+= media/
 obj-$(CONFIG_USB_STV680)	+= media/
 obj-$(CONFIG_USB_VICAM)		+= media/