mtime.cpp
来自「symbian 下的helix player源代码」· C++ 代码 · 共 166 行
CPP
166 行
/* ***** BEGIN LICENSE BLOCK *****
* Source last modified: $Id: mtime.cpp,v 1.2.36.3 2004/07/09 01:43:21 hubbe Exp $
*
* Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved.
*
* The contents of this file, and the files included with this file,
* are subject to the current version of the RealNetworks Public
* Source License (the "RPSL") available at
* http://www.helixcommunity.org/content/rpsl unless you have licensed
* the file under the current version of the RealNetworks Community
* Source License (the "RCSL") available at
* http://www.helixcommunity.org/content/rcsl, in which case the RCSL
* will apply. You may also obtain the license terms directly from
* RealNetworks. You may not use this file except in compliance with
* the RPSL or, if you have a valid RCSL with RealNetworks applicable
* to this file, the RCSL. Please see the applicable RPSL or RCSL for
* the rights, obligations and limitations governing use of the
* contents of the file.
*
* Alternatively, the contents of this file may be used under the
* terms of the GNU General Public License Version 2 or later (the
* "GPL") in which case the provisions of the GPL are applicable
* instead of those above. If you wish to allow use of your version of
* this file only under the terms of the GPL, and not to allow others
* to use your version of this file under the terms of either the RPSL
* or RCSL, indicate your decision by deleting the provisions above
* and replace them with the notice and other provisions required by
* the GPL. If you do not delete the provisions above, a recipient may
* use your version of this file under the terms of any one of the
* RPSL, the RCSL or the GPL.
*
* This file is part of the Helix DNA Technology. RealNetworks is the
* developer of the Original Code and owns the copyrights in the
* portions it created.
*
* This file, and the files included with this file, is distributed
* and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY
* KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS
* ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET
* ENJOYMENT OR NON-INFRINGEMENT.
*
* Technology Compatibility Kit Test Suite(s) Location:
* http://www.helixcommunity.org/content/tck
*
* Contributor(s):
*
* ***** END LICENSE BLOCK ***** */
#include "hxtypes.h"
#include "hxtime.h"
#include "hxassert.h"
#include <limits.h>
#ifndef _MAC_MACHO
#include <Timer.h>
#endif
#include <time.h>
#define kMaxMicroSecondComponent ULONG_MAX
#define kLoMicroSecondsPerSecond 1000000
#define kSecondsPerHiMicroSecond ( kMaxMicroSecondComponent / kLoMicroSecondsPerSecond )
#define kLoMicroSecondsRoundOff ( kMaxMicroSecondComponent % kLoMicroSecondsPerSecond )
static BOOL gHasCalculatedReferenceTime = FALSE;
static time_t gReferenceTime;
static UnsignedWide gReferenceMicroSeconds;
int gettimeofday(HXTime* pTime, void* unused)
{
// (?) Warning: Overflow not currently checked.
if ( !gHasCalculatedReferenceTime )
{
// convert to Windows time ( secs since 1/1/70 )
struct tm the1970Time = { 0, 0, 0, 0, 0, 0, 0, 0, 0 };
the1970Time.tm_year = 70;
the1970Time.tm_mday = 1;
the1970Time.tm_mon = 0;
time_t theWinTime = mktime( &the1970Time );
time_t theMacTime;
UnsignedWide theRefMicroSecs1, theRefMicroSecs2;
Microseconds( &theRefMicroSecs1 );
time( &theMacTime ); // mac time in secs since 1/1/00
Microseconds( &theRefMicroSecs2 );
/* Calculate the average of theRefMicroSecs1 and theRefMicroSecs2
to correspond with the time calculated with time(). */
gReferenceTime = theMacTime - theWinTime;
gReferenceMicroSeconds.lo = ( theRefMicroSecs1.lo >> 1 ) + ( theRefMicroSecs2.lo >> 1 ) +
( ( ( theRefMicroSecs1.lo & 1 ) + ( theRefMicroSecs2.lo & 1 ) ) >> 1 );
gReferenceMicroSeconds.hi = ( theRefMicroSecs1.hi >> 1 ) + ( theRefMicroSecs2.hi >> 1 ) +
( ( ( theRefMicroSecs1.hi & 1 ) + ( theRefMicroSecs2.hi & 1 ) ) >> 1 );
pTime->tv_sec = gReferenceTime;
pTime->tv_usec = 0;
gHasCalculatedReferenceTime = TRUE;
}
else
{
UnsignedWide theCurrentMicroSecs, theDifferenceMicroSecs;
Microseconds( &theCurrentMicroSecs );
HX_ASSERT( ( theCurrentMicroSecs.hi > gReferenceMicroSeconds.hi ) ||
( ( theCurrentMicroSecs.hi == gReferenceMicroSeconds.hi ) &&
( theCurrentMicroSecs.lo >= gReferenceMicroSeconds.lo ) ) );
// Calculate theDifferenceMicroSecs = theCurrentMicroSecs - gReferenceMicroSeconds;
BOOL hasLoComponentRolledOver;
if ( theCurrentMicroSecs.lo >= gReferenceMicroSeconds.lo )
{
theDifferenceMicroSecs.lo = theCurrentMicroSecs.lo - gReferenceMicroSeconds.lo;
hasLoComponentRolledOver = FALSE;
}
else
{
theDifferenceMicroSecs.lo = kMaxMicroSecondComponent - gReferenceMicroSeconds.lo + theCurrentMicroSecs.lo;
hasLoComponentRolledOver = TRUE;
}
theDifferenceMicroSecs.hi = theCurrentMicroSecs.hi - gReferenceMicroSeconds.hi;
if ( hasLoComponentRolledOver )
{
theDifferenceMicroSecs.hi--;
}
// Return Seconds and Microseconds portions of theDifferenceMicroSecs added to the gReferenceTime.
pTime->tv_sec = gReferenceTime + ( theDifferenceMicroSecs.lo / kLoMicroSecondsPerSecond );
pTime->tv_usec = theDifferenceMicroSecs.lo % kLoMicroSecondsPerSecond;
if ( theDifferenceMicroSecs.hi > 0 )
{
ULONG32 theMicroSecondRoundOff = theDifferenceMicroSecs.hi * kLoMicroSecondsRoundOff;
pTime->tv_sec += theDifferenceMicroSecs.hi * kSecondsPerHiMicroSecond;
pTime->tv_sec += theMicroSecondRoundOff / kLoMicroSecondsPerSecond;
pTime->tv_usec += theMicroSecondRoundOff % kLoMicroSecondsPerSecond;
pTime->tv_sec += pTime->tv_usec / kLoMicroSecondsPerSecond;
pTime->tv_usec %= kLoMicroSecondsPerSecond;
}
}
return 0;
}
time_t WinToMacTime(time_t timeT)
{
// convert to Mac time (secs since 1/1/04)
struct tm t1970 = {0,0,0,0,0,0,0,0,0};
t1970.tm_year=70;
t1970.tm_mday=1;
t1970.tm_mon=0;
time_t macT = mktime(&t1970);
return (macT+timeT);
}
time_t MacToWinTime(time_t timeT)
{
// convert to Win time (secs since 1/1/70)
struct tm t1970 = {0,0,0,0,0,0,0,0,0};
t1970.tm_year=70;
t1970.tm_mday=1;
t1970.tm_mon=0;
time_t winT = mktime(&t1970);
return (timeT-winT);
}
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?