📄 perplex.cpp
字号:
/* ***** BEGIN LICENSE BLOCK *****
* Source last modified: $Id: perplex.cpp,v 1.5.32.3 2004/07/09 01:48:16 hubbe Exp $
*
* Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved.
*
* The contents of this file, and the files included with this file,
* are subject to the current version of the RealNetworks Public
* Source License (the "RPSL") available at
* http://www.helixcommunity.org/content/rpsl unless you have licensed
* the file under the current version of the RealNetworks Community
* Source License (the "RCSL") available at
* http://www.helixcommunity.org/content/rcsl, in which case the RCSL
* will apply. You may also obtain the license terms directly from
* RealNetworks. You may not use this file except in compliance with
* the RPSL or, if you have a valid RCSL with RealNetworks applicable
* to this file, the RCSL. Please see the applicable RPSL or RCSL for
* the rights, obligations and limitations governing use of the
* contents of the file.
*
* Alternatively, the contents of this file may be used under the
* terms of the GNU General Public License Version 2 or later (the
* "GPL") in which case the provisions of the GPL are applicable
* instead of those above. If you wish to allow use of your version of
* this file only under the terms of the GPL, and not to allow others
* to use your version of this file under the terms of either the RPSL
* or RCSL, indicate your decision by deleting the provisions above
* and replace them with the notice and other provisions required by
* the GPL. If you do not delete the provisions above, a recipient may
* use your version of this file under the terms of any one of the
* RPSL, the RCSL or the GPL.
*
* This file is part of the Helix DNA Technology. RealNetworks is the
* developer of the Original Code and owns the copyrights in the
* portions it created.
*
* This file, and the files included with this file, is distributed
* and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY
* KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS
* ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET
* ENJOYMENT OR NON-INFRINGEMENT.
*
* Technology Compatibility Kit Test Suite(s) Location:
* http://www.helixcommunity.org/content/tck
*
* Contributor(s):
*
* ***** END LICENSE BLOCK ***** */
//*******************************************************************
//*************************** INCLUDE FILES *************************
//*******************************************************************
#include "perplex.h"
#include "hxassert.h"
#include "hlxclib/string.h"
// #include "hlxclib/stdio.h"
#include "netbyte.h"
#include "hxheap.h"
#ifdef _DEBUG
#undef HX_THIS_FILE
static const char HX_THIS_FILE[] = __FILE__;
#endif
//*******************************************************************
//************************* INTERFACE LISTING ***********************
//*******************************************************************
BEGIN_INTERFACE_LIST(CHXPerplex)
INTERFACE_LIST_ENTRY(IID_IHXPerplex, IHXPerplex)
END_INTERFACE_LIST
//*******************************************************************
//*************************** CONSTRUCTOR ***************************
//*******************************************************************
CHXPerplex::CHXPerplex()
{
;
}
//*******************************************************************
//*************************** DESTRUCTOR ****************************
//*******************************************************************
CHXPerplex::~CHXPerplex()
{
;
}
//*******************************************************************
//*************************** Perplex() *****************************
//*******************************************************************
STDMETHODIMP CHXPerplex::Perplex(IHXBuffer *pInBuf, IHXBuffer *pOutBuf)
{
UINT32 FinalLen; // length of encoded data
CHXPerplexBuffer pInPBuf; // Temp buffer to keep code
// copy the IRMA Input Buffer into the CHXPerplex Input Buffer
pInPBuf.SafeMemCopy(0, (const void*) pInBuf->GetBuffer(), (UINT32)pInBuf->GetSize());
// Make sure the input buffer size is a multiple of 4bytes as
// needed by Perplex alg. Padding with '\0' otherwise.
UINT32 nAlign = (pInBuf->GetSize()) % sizeof(ULONG32);
UINT32 Offset = (UINT32)pInBuf->GetSize();
if (nAlign > 0)
{
pInPBuf.EnsureValidOffset(Offset+sizeof(ULONG32)-nAlign);
for (; nAlign < sizeof(ULONG32); nAlign++)
{
pInPBuf.SetUCHAR(Offset++,0);
}
}
FinalLen = Offset * Perplex_PER_ULONG32 / sizeof(ULONG32); // calc size of the outout (Perplexed) buffer.
// alloc mem for final perplexed buffer
// Add one to length 'cause low level perplex adds
// a '\0' to the resulting string
pOutBuf->SetSize(FinalLen+1);
if (pOutBuf->GetBuffer() == NULL) return(HXR_FAIL);
CHXPerplex::DumpToPerplex((char*)(pOutBuf->GetBuffer()), FinalLen+1, pInPBuf.GetPtr(), Offset);
return(HXR_OK);
}
//*******************************************************************
//*************************** DePerplex() ***************************
//*******************************************************************
// Parameters:
//
// const char* Perplex
// Pointer to a buffer that contains a Perplexidecimal encoding
//
// UCHAR* Bits
// Pointer to a buffer that will contain decoded bytes of information
//
// int nSize
// Input size in bytes
STDMETHODIMP CHXPerplex::DePerplex(IHXBuffer *pInBuf, IHXBuffer *pOutBuf)
{
const char* pPerplex = (const char *)pInBuf->GetBuffer();
UCHAR* Bits = NULL;
UINT32 nSize = pInBuf->GetSize();
if (!nSize)
{
pOutBuf->SetSize(0);
return HXR_OK;
}
nSize--; // -1 is for the extra character added in Perplex
UINT32 ndxBits;
UINT32 ndxPerplex = 0;
ULONG32 temp32;
UINT32 ulOutSize = 2*nSize+100;
pOutBuf->SetSize(ulOutSize); // Make it bigger since the real size isn't known yet
Bits = (UCHAR *)pOutBuf->GetBuffer();
for (ndxBits = 0; ndxPerplex < nSize; )
{
temp32 = FromPerplex(&pPerplex[ndxPerplex]);
ndxPerplex+=Perplex_PER_ULONG32;
if (ndxBits+4 <= ulOutSize) memcpy(&Bits[ndxBits],&temp32,sizeof(temp32)); /* Flawfinder: ignore */
ndxBits+=sizeof(temp32);
}
pOutBuf->SetSize(ndxBits);
return HXR_OK;
}
//*******************************************************************
//************************* MapFromPerplex **************************
//*******************************************************************
// Converts appropriate characters for Perplex encoding into a ULONG32.
// A copy of this is kept in in pnmisc\pub\win\pnmisc16.h. If you change
// this (which is very unlikely), then be sure to change it there.
static const char zPerplexChars[] =
{
'0', '1', '2', '3', '4', '5', '6', '7', '8', '9',
'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j',
'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't',
'u', 'v', 'w', 'x', 'y', 'z', 'A', 'B', 'C', 'D',
'E'
};
UCHAR CHXPerplex::MapFromPerplex(char Perplex)
{
UCHAR temp = sizeof(zPerplexChars)/sizeof(zPerplexChars[0]);
for (UCHAR n = 0; n < temp; n++)
{
if (Perplex == zPerplexChars[n]) return n;
}
return 0;
}
//*******************************************************************
//*************************** MapToPerplex **************************
//*******************************************************************
// Converts a digit ordinal to the Perplex digit...
char CHXPerplex::MapToPerplex(UCHAR cPerplex)
{
#ifdef _DEBUG
int size_zPerplexChars = sizeof(zPerplexChars);
int size_zPerplexChars0 = sizeof(zPerplexChars[0]);
HX_ASSERT(cPerplex < size_zPerplexChars/size_zPerplexChars0);
#endif
return zPerplexChars[cPerplex];
}
//*******************************************************************
//*************************** FromPerplex ***************************
//*******************************************************************
// Converts appropriate characters for Perplex encoding into a ULONG32.
ULONG32 CHXPerplex::FromPerplex(const char* Perplex)
{
ULONG32 value = 0;
ULONG32 PerplexBase = 1;
for (int n = 0; n < Perplex_PER_ULONG32; n++)
{
value += MapFromPerplex(Perplex[n]) * PerplexBase;
PerplexBase *= Perplex_BASE;
}
// Convert to local byte order!
value = DwToHost(value);
return value;
}
//*******************************************************************
//**************************** ToPerplex ****************************
//*******************************************************************
// Converts a ULONG32 into the appropriate characters for Perplex encoding.
void CHXPerplex::ToPerplex(ULONG32 Input, char* pPerplex)
{
ULONG32 value;
UCHAR charValue;
value = DwToNet(Input); // Convert to net byte order!
for (int n=0; n < Perplex_PER_ULONG32; n++)
{
charValue = (UCHAR)(value % Perplex_BASE);
pPerplex[n] = MapToPerplex(charValue);
value = value / Perplex_BASE;
}
}
//*******************************************************************
//*************************** DumpToPerplex *************************
//*******************************************************************
// Parameters:
//
// char* pPerplex
// Pointer to buffer to be filled with Perplexadecimal
void CHXPerplex::DumpToPerplex(char* pPerplex, UINT32 ulPerplexSize, UCHAR* Bits, UINT32 nSize)
{
UINT32 ndxBits;
UINT32 ndxPerplex = 0;
ULONG32 temp32;
for (ndxBits = 0; ndxBits < nSize; )
{
if (ndxBits+4 <= nSize) memcpy(&temp32,&Bits[ndxBits],sizeof(temp32)); /* Flawfinder: ignore */
ndxBits+=sizeof(temp32);
if (ndxPerplex+Perplex_PER_ULONG32 <= ulPerplexSize) ToPerplex(temp32,&pPerplex[ndxPerplex]);
ndxPerplex+=Perplex_PER_ULONG32;
}
pPerplex[ndxPerplex] = '\0';
}
//*******************************************************************
//***** ******
//***** ******
//***** ******
//***** ******
//***** ******
//***** ******
//***** CHXPerplexBuffer ******
//***** ******
//***** ******
//***** ******
//***** ******
//***** ******
//***** ******
//*******************************************************************
//*******************************************************************
//****************** CHXPerplexBuffer CONSTRUCTOR *******************
//*******************************************************************
CHXPerplexBuffer::CHXPerplexBuffer()
: m_nSize(0), m_pData(NULL), m_nGrowBy(DEFAULT_GROW_SIZE)
{
}
//*******************************************************************
//****************** CHXPerplexBuffer CONSTRUCTOR *******************
//*******************************************************************
CHXPerplexBuffer::CHXPerplexBuffer(UINT32 nSize, UINT32 nGrowBy)
: m_nSize(0), m_pData(NULL), m_nGrowBy(nGrowBy)
{
Resize(nSize);
}
//*******************************************************************
//******************* CHXPerplexBuffer DESTRUCTOR *******************
//*******************************************************************
CHXPerplexBuffer::~CHXPerplexBuffer()
{
Free();
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -