xmlesc.h
来自「symbian 下的helix player源代码」· C头文件 代码 · 共 372 行
H
372 行
/* ***** BEGIN LICENSE BLOCK *****
* Source last modified: $Id: xmlesc.h,v 1.5.2.1 2004/07/19 21:04:07 hubbe Exp $
*
* Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved.
*
* The contents of this file, and the files included with this file,
* are subject to the current version of the RealNetworks Public
* Source License (the "RPSL") available at
* http://www.helixcommunity.org/content/rpsl unless you have licensed
* the file under the current version of the RealNetworks Community
* Source License (the "RCSL") available at
* http://www.helixcommunity.org/content/rcsl, in which case the RCSL
* will apply. You may also obtain the license terms directly from
* RealNetworks. You may not use this file except in compliance with
* the RPSL or, if you have a valid RCSL with RealNetworks applicable
* to this file, the RCSL. Please see the applicable RPSL or RCSL for
* the rights, obligations and limitations governing use of the
* contents of the file.
*
* Alternatively, the contents of this file may be used under the
* terms of the GNU General Public License Version 2 or later (the
* "GPL") in which case the provisions of the GPL are applicable
* instead of those above. If you wish to allow use of your version of
* this file only under the terms of the GPL, and not to allow others
* to use your version of this file under the terms of either the RPSL
* or RCSL, indicate your decision by deleting the provisions above
* and replace them with the notice and other provisions required by
* the GPL. If you do not delete the provisions above, a recipient may
* use your version of this file under the terms of any one of the
* RPSL, the RCSL or the GPL.
*
* This file is part of the Helix DNA Technology. RealNetworks is the
* developer of the Original Code and owns the copyrights in the
* portions it created.
*
* This file, and the files included with this file, is distributed
* and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY
* KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS
* ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET
* ENJOYMENT OR NON-INFRINGEMENT.
*
* Technology Compatibility Kit Test Suite(s) Location:
* http://www.helixcommunity.org/content/tck
*
* Contributor(s):
*
* ***** END LICENSE BLOCK ***** */
#ifndef _XMLCONV_H_
#define _XMLCONV_H_
#include "growingq.h"
/****************************************************************************
* $Id: xmlesc.h,v 1.5.2.1 2004/07/19 21:04:07 hubbe Exp $
*
* NAME: xmlesc.h
*
* CLASS
* CEscapeXMLtoHTML
*
* DESCRIPTION:
* The declaration for a class that escapes all the XML characters
* that are not printable in HTML. A IHXBuffer is passed into the
* class on throgh the Convert Method. This is a pure virtual
* class. The CheckTag, and OnTag functions must be implemented by
* a child class.
*
***************************************************************************/
// XXXJHUG - I can't find a max tag length in the XML specs - this works
// with everything we parse so far.
const UINT32 MAXTAGLEN = 128;
class CEscapeXMLtoHTML
{
public:
/*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* CEscapeXMLtoHTML(pServerUrl, pOurPath)
*
* PARAMETERS:
* pServerUrl Full url to the server including the template file.
* pOurPath The Relative path of the file currently being parsed
* no ending /
* bMangleLinks - to mangle or not
* bUseStyles - output in styles or regular HTML
* pHotTags - The tags that we will call OnTag For.
* pDefaultView - The default viewsource to use for remote rstp
* links ":port/viewmount/viewfile"
*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
CEscapeXMLtoHTML(IHXValues* pOptions, const char** pHotTags);
/*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* ~CEscapeXMLtoHTML()
*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
virtual ~CEscapeXMLtoHTML();
/*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Convert(pXMLsrc)
*
* PARAMETERS:
* pXMLsrc Pointer to a IHXBuffer containing the src of xml to
* be converted
* RETURNS
* A new IHXBuffer containing the parsed XML data ready to be
* displayed in an HTML browser.
*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
STDMETHOD(Convert)(THIS_ IHXBuffer* pBufIn, REF(IHXBuffer*) pOutBuffer);
/*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* StatesEnum
*
* DESCRIPTION:
* enum descibing the different stages of the Parse Function
*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
enum StatesEnum { IN_CONTENT
, IN_DOC_TYPE_DEC
, IN_DOC_TYPE_DEC_TAG
, IN_CDATA
, ABOUT_TO_BEGIN_TAG
, IN_BEGIN_TAG
, IN_TAG
, BEGIN_ATTRIBUTE_VALUE
, IN_QUOTED_ATTRIBUTE_VALUE
, IN_BROKEN_QUOTED_ATTRIBUTE_VALUE
, IN_UNQUOTED_ATTRIBUTE_VALUE
, IN_COMMENT
, IN_AMPERSAND_THINGY
};
protected:
/*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* struct DataObject
*
* DESCRIPTION:
* structure that defines the state of the Parse function
*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
class DataObject {
public:
DataObject() : state(IN_CONTENT), bInBrokenXML(FALSE),
bPushChar(FALSE), tag_index(0), bInProcessingInstructions(FALSE),
bInInternalComment(FALSE), bInDataSection(FALSE), cQuote('\0') {}
StatesEnum state;
BOOL bInBrokenXML;
BOOL bPushChar;
char tag[MAXTAGLEN]; /* Flawfinder: ignore */
UINT32 tag_index;
BOOL bInProcessingInstructions;
BOOL bInInternalComment;
BOOL bInDataSection;
char cQuote;
};
/*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* PURE VIRTUAL FUNCTION
* OnTag(cp, pObj, queue)
*
* PARAMETERS:
*
* cp Pointer to a character string. It points to the first
* letter of the tag name that we want to do special stuff to
* ulLen Length to end of cp so we don't overrun the buffer
* pObj The current state of the Parse Function, this can be used
* to continue parsing.
* queue The queue to push the output to.
*
* DESCRIPTION:
* This method is implemented by a specialized class to take care of
* a tag that returned true from the CheckTag call. It returns how
* many characters it ate off the cp.
* This function can recursivly call the parse function to keep the
* formatting consistant.
*
* RETURNS
* UINT32
* number of characters used off cp, thus the position can be
* adjusted after the function returns
*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
virtual UINT32 OnTag(const UCHAR* cp, UINT32 ulLen, DataObject* pObj,
CBigByteGrowingQueue* queue) = 0;
/*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* PURE VIRTUAL FUNCTION
* PushHeader(queue)
*
* PARAMETERS:
* queue The queue to push the output to.
*
* DESCRIPTION:
* This method is implemented by classes that are derived from us.
* It allows the class to output type specific information before the
* Actual XML source is presented.
*
* RETURNS
* void
*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
virtual void PushHeader(CBigByteGrowingQueue* queue) = 0;
/*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* PushCommonHeader(queue)
*
* PARAMETERS:
* queue The queue to push the output to.
*
* DESCRIPTION:
* This method outputs the common information for files. It usually
* should be called from PushHeader after the file specific information
* has been queued.
*
* RETURNS
* void
*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
void PushCommonHeader(CBigByteGrowingQueue* queue);
/*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Parse(pIn, ulLen, pQueue, pObj)
*
* PARAMETERS:
*
* pIn The string to be parsed.
* ulLen How far to parse through pIn
* pQueue The output Queue to push onto
* pObj The state object. This is used to start the queue from a
* given state.
*
* DESCRIPTION:
*
* This function walks through the string one character at a time.
* Every tag is checked with the CheckTag(...) function to see if it
* needs special attention. If so the OnTag(...) function is
* called. This function will be implemented in a child class that
* will replace the tag with parsed imput returning how far along
* pIn it made it.
*
* This function is designed such that Inherited classes can
* recusivly call it to parse thier stream from the given state.
*
* RETURNS
* void
*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
void Parse(const UCHAR* pIn, UINT32 ulLen, CBigByteGrowingQueue* pQueue,
DataObject* pObj);
/*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* WrapAttributeWithHREF (cp, pObj, pQueue, pAttribute)
*
* PARAMETERS:
*
* cp Pointer to a character string. It points to the first
* letter of the tag name that we want to do special stuff to
* ulLen Length to end of cp so we don't overrun the buffer
* pObj The current state of the Parse Function, this can be used
* to continue parsing.
* queue The queue to push the output to.
* pAttribute The attribute we want to wrap.
*
* DESCRIPTION:
* This method will take the given cp and wrap the given attribute
* with an HREF. It will be used by Inherited classes in their OnTag
* Function
*
* RETURNS
* UINT32
* number of characters used off cp, thus the position can be
* adjusted after the function returns
*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
UINT32 WrapAttributeWithHREF(const UCHAR* cp,
UINT32 ulLen, DataObject* pObj, CBigByteGrowingQueue* pQueue,
const char* pAttribute);
#ifdef HYPER_LINKING_HREFS_XML
UINT32 LinkHREF(const UCHAR* cp,
UINT32 ulLen, DataObject* pObj, CBigByteGrowingQueue* pQueue);
#endif
/*___________________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Helper Methods: These methods are used to help witht the implentation of
* OnTag function
*___________________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
BOOL m_bMangleLinks;
char* m_pOurPath;
char* m_pFileName;
char* m_pRamGen;
ULONG32 m_ulModDate;
ULONG32 m_ulFileSize;
private:
/*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* CheckTag(pObj)
*
* PARAMETERS:
* pObj The State object. It contains the tag name.
*
* DESCRIPTION:
* This method checks cp to see if it is the start of a tag we are
* looking
* RETURNS
* BOOL
* TRUE if we want OnTag called, or FALSE if we will ignor this
* tag
*_______________________________________________________________________
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
BOOL CheckTag(DataObject* pObj);
BOOL PushOpenningHREF(const UCHAR* cp, CBigByteGrowingQueue* pQueue, char cEndQuote);
void PushEndingHREF(CBigByteGrowingQueue* pQueue);
UINT32 PushMangledDisplayedPath(const UCHAR* cp,
CBigByteGrowingQueue* pQueue, char cEndQuote);
char* EncryptParameter(char* pPath);
UCHAR* GetParameter(const UCHAR* cp, UINT32 ulNameLen, BOOL bFullPath = FALSE);
void BeginColorTag (CBigByteGrowingQueue* qu, DataObject *pObj);
void EndColorTag (CBigByteGrowingQueue* qu, DataObject *pObj);
const char** m_pEscapeStrings;
const char** m_pHotTags;
char* m_pDefaultView;
char* m_pServerUrl;
enum m_enumTags
{
BeginTagMarkup,
EndTagMarkup,
BeginTagNameMarkup,
EndTagNameMarkup,
BeginAttributeValueMarkup,
EndAttributeValueMarkup,
BeginBrokenAttributeMarkup,
EndBrokenAttributeMarkup,
BeginCommentMarkup,
EndCommentMarkup,
BeginAmpersandThingyMarkup,
EndAmpersandThingyMarkup,
BeginHREF,
EndHREF,
BeginProcessingInstructions,
EndProcessingInstructions,
BeginCDATA,
EndCDATA,
BeginDTD,
EndDTD
};
static const char* const m_pDefaultTags[20];
static const char* const m_pStyleTags[20];
};
#endif // _XMLCONV_H_
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?