hxengin.h

来自「symbian 下的helix player源代码」· C头文件 代码 · 共 2,476 行 · 第 1/5 页

H
2,476
字号
/* ***** BEGIN LICENSE BLOCK *****
 * Source last modified: $Id: hxengin.h,v 1.4.2.3 2004/07/09 01:45:08 hubbe Exp $
 * 
 * Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved.
 * 
 * The contents of this file, and the files included with this file,
 * are subject to the current version of the RealNetworks Public
 * Source License (the "RPSL") available at
 * http://www.helixcommunity.org/content/rpsl unless you have licensed
 * the file under the current version of the RealNetworks Community
 * Source License (the "RCSL") available at
 * http://www.helixcommunity.org/content/rcsl, in which case the RCSL
 * will apply. You may also obtain the license terms directly from
 * RealNetworks.  You may not use this file except in compliance with
 * the RPSL or, if you have a valid RCSL with RealNetworks applicable
 * to this file, the RCSL.  Please see the applicable RPSL or RCSL for
 * the rights, obligations and limitations governing use of the
 * contents of the file.
 * 
 * Alternatively, the contents of this file may be used under the
 * terms of the GNU General Public License Version 2 or later (the
 * "GPL") in which case the provisions of the GPL are applicable
 * instead of those above. If you wish to allow use of your version of
 * this file only under the terms of the GPL, and not to allow others
 * to use your version of this file under the terms of either the RPSL
 * or RCSL, indicate your decision by deleting the provisions above
 * and replace them with the notice and other provisions required by
 * the GPL. If you do not delete the provisions above, a recipient may
 * use your version of this file under the terms of any one of the
 * RPSL, the RCSL or the GPL.
 * 
 * This file is part of the Helix DNA Technology. RealNetworks is the
 * developer of the Original Code and owns the copyrights in the
 * portions it created.
 * 
 * This file, and the files included with this file, is distributed
 * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY
 * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS
 * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES
 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET
 * ENJOYMENT OR NON-INFRINGEMENT.
 * 
 * Technology Compatibility Kit Test Suite(s) Location:
 *    http://www.helixcommunity.org/content/tck
 * 
 * Contributor(s):
 * 
 * ***** END LICENSE BLOCK ***** */

#ifndef _HXENGIN_H_
#define _HXENGIN_H_

#include "hxcom.h"

/*
 * Forward declarations of some interfaces used here-in.
 */

typedef _INTERFACE	IHXBuffer			IHXBuffer;
typedef _INTERFACE	IHXCallback			IHXCallback;
typedef _INTERFACE	IHXScheduler			IHXScheduler;
typedef _INTERFACE	IHXTCPResponse			IHXTCPResponse;
typedef _INTERFACE	IHXLBoundTCPSocket		IHXLBoundTCPSocket;
typedef _INTERFACE	IHXTCPSocket			IHXTCPSocket;
typedef _INTERFACE	IHXListenResponse		IHXListenResponse;
typedef _INTERFACE	IHXListenSocket		IHXListenSocket;
typedef _INTERFACE	IHXNetworkServices		IHXNetworkServices;
typedef _INTERFACE	IHXNetworkServices2		IHXNetworkServices2;
typedef _INTERFACE	IHXUDPResponse		    	IHXUDPResponse;
typedef _INTERFACE	IHXUDPSocket			IHXUDPSocket;
typedef _INTERFACE	IHXResolver			IHXResolver;
typedef _INTERFACE	IHXResolverResponse		IHXResolverResponse;
typedef _INTERFACE	IHXInterruptSafe		IHXInterruptSafe;
typedef _INTERFACE	IHXAsyncIOSelection		IHXAsyncIOSelection;
typedef _INTERFACE	IHXUDPMulticastInit		IHXUDPMulticastInit;
typedef _INTERFACE	IHXInterruptState		IHXInterruptState;
typedef _INTERFACE	IHXOptimizedScheduler		IHXOptimizedScheduler;
// $Private:
typedef _INTERFACE	IHXThreadSafeScheduler		IHXThreadSafeScheduler;
typedef _INTERFACE	IHXBufferedSocket		IHXBufferedSocket;
typedef _INTERFACE	IHXNetInterfaces		IHXNetInterfaces;
typedef _INTERFACE	IHXNetInterfacesAdviseSink	IHXNetInterfacesAdviseSink;
// $EndPrivate.
typedef _INTERFACE	IHXNetworkInterfaceEnumerator	IHXNetworkInterfaceEnumerator;
typedef _INTERFACE	IHXUDPConnectedSocket           IHXUDPConnectedSocket;


/*
 * Address flags starting with PNR are depricated.
 */
#define HXR_INADDR_ANY	(UINT32)0x00000000  //THIS FLAG IS DEPRICATED
#define HX_INADDR_ANY	(UINT32)0x00000000

/*
 * 255.255.255.254
 *
 * Bind to all ports in IPBindings list from
 * server config.
 */
#define HXR_INADDR_IPBINDINGS (UINT32)0xfffffffe    //THIS FLAG IS DEPRICATED
#define HX_INADDR_IPBINDINGS (UINT32)0xfffffffe


/* Async IO Selection Type (Unix Only) */

#define PNAIO_READ 1
#define PNAIO_WRITE 2
#define PNAIO_EXCEPTION 4

/****************************************************************************
 * 
 *  Interface:
 * 
 *	IHXCallback
 * 
 *  Purpose:
 * 
 *	This interface defines a simple callback which will be used in
 *	various interfaces such as IHXScheduler.
 * 
 *  IID_IHXCallback:
 * 
 *	{00000100-0901-11d1-8B06-00A024406D59}
 * 
 */
DEFINE_GUID(IID_IHXCallback, 0x00000100, 0x901, 0x11d1, 0x8b, 0x6, 0x0, 
			0xa0, 0x24, 0x40, 0x6d, 0x59);

#undef  INTERFACE
#define INTERFACE   IHXCallback

DECLARE_INTERFACE_(IHXCallback, IUnknown)
{
    /*
     *  IUnknown methods
     */
    STDMETHOD(QueryInterface)	(THIS_
				REFIID riid,
				void** ppvObj) PURE;

    STDMETHOD_(ULONG32,AddRef)	(THIS) PURE;

    STDMETHOD_(ULONG32,Release)	(THIS) PURE;

    /*
     *  IHXCallback methods
     */

    /************************************************************************
     *	Method:
     *	    IHXCallback::Func
     *	Purpose:
     *	    This is the function that will be called when a callback is
     *	    to be executed.
     */
    STDMETHOD(Func)		(THIS) PURE;
};


/****************************************************************************
 * 
 *  Interface:
 * 
 *	IHXScheduler
 * 
 *  Purpose:
 * 
 *	This interface provides the user with a way of scheduling callbacks
 *	that will be executed at some time in the future.
 * 
 *  IID_IHXScheduler:
 * 
 *	{00000101-0901-11d1-8B06-00A024406D59}
 * 
 */
DEFINE_GUID(IID_IHXScheduler, 0x00000101, 0x901, 0x11d1, 0x8b, 0x6, 0x0, 
			0xa0, 0x24, 0x40, 0x6d, 0x59);

#undef  INTERFACE
#define INTERFACE   IHXScheduler

typedef ULONG32 CallbackHandle;

typedef struct _HXTimeval
{
    UINT32 tv_sec;
    UINT32 tv_usec;
} HXTimeval;

DECLARE_INTERFACE_(IHXScheduler, IUnknown)
{
    /*
     *  IUnknown methods
     */
    STDMETHOD(QueryInterface)		(THIS_
					REFIID riid,
					void** ppvObj) PURE;

    STDMETHOD_(ULONG32,AddRef)		(THIS) PURE;

    STDMETHOD_(ULONG32,Release)		(THIS) PURE;

    /*
     *	IHXScheduler methods
     */

    /************************************************************************
     *	Method:
     *	    IHXScheduler::RelativeEnter
     *	Purpose:
     *	    Schedule a callback to be executed "ms" milliseconds from now
     *	    This function is less percise then AbsoluteEnter and should only
     *	    be used when accurate timing is not critical.
     */
    STDMETHOD_(CallbackHandle,RelativeEnter)	(THIS_
						IHXCallback* pCallback,
						UINT32 ms) PURE;

    /************************************************************************
     *	Method:
     *	    IHXScheduler::AbsoluteEnter
     *	Purpose:
     *	    Schedule a callback to be executed at time "tVal".
     */
    STDMETHOD_(CallbackHandle,AbsoluteEnter)	(THIS_
						IHXCallback* pCallback,
						HXTimeval tVal) PURE;

    /************************************************************************
     *	Method:
     *	    IHXScheduler::Remove
     *	Purpose:
     *	    Remove a callback from the scheduler.
     */
    STDMETHOD(Remove)		(THIS_
			    	CallbackHandle Handle) PURE;

    /************************************************************************
     *	Method:
     *	    IHXScheduler::GetCurrentSchedulerTime
     *	Purpose:
     *	    Gives the current time (in the timeline of the scheduler).
     */
    STDMETHOD_(HXTimeval,GetCurrentSchedulerTime)	(THIS) PURE;
};


/****************************************************************************
 * 
 *  Interface:
 * 
 *	IHXTCPResponse
 * 
 *  Purpose:
 * 
 *	This is the response interface for the asynchronous TCP networking 
 *	interface.
 * 
 *  IID_IHXTCPResponse:
 * 
 *	{00000102-0901-11d1-8B06-00A024406D59}
 * 
 */
DEFINE_GUID(IID_IHXTCPResponse, 0x00000102, 0x901, 0x11d1, 0x8b, 0x6, 0x0, 
			0xa0, 0x24, 0x40, 0x6d, 0x59);

#undef  INTERFACE
#define INTERFACE   IHXTCPResponse

DECLARE_INTERFACE_(IHXTCPResponse, IUnknown)
{
    /*
     *  IUnknown methods
     */
    STDMETHOD(QueryInterface)		(THIS_
					REFIID riid,
					void** ppvObj) PURE;

    STDMETHOD_(ULONG32,AddRef)		(THIS) PURE;

    STDMETHOD_(ULONG32,Release)		(THIS) PURE;

    /*
     *	IHXTCPResponse methods
     */

    /************************************************************************
     *	Method:
     *	    IHXTCPResponse::ConnectDone
     *	Purpose:
     *	    A Connect operation has been completed or an error has occurred.
     */
    STDMETHOD(ConnectDone)	(THIS_
				HX_RESULT		status) PURE;

    /************************************************************************
     *	Method:
     *	    IHXTCPResponse::ReadDone
     *	Purpose:
     *	    A Read operation has been completed or an error has occurred.
     *	    The data is returned in the IHXBuffer.
     */
    STDMETHOD(ReadDone)		(THIS_
				HX_RESULT		status,
				IHXBuffer*		pBuffer) PURE;

    /************************************************************************
     *	Method:
     *	    IHXTCPResponse::WriteReady
     *	Purpose:
     *	    This is the response method for WantWrite.
     *	    If HX_RESULT is ok, then the TCP channel is ok to Write to.
     */
    STDMETHOD(WriteReady)	(THIS_
    				HX_RESULT		status) PURE;

    /************************************************************************
     *	Method:
     *	    IHXTCPResponse::Closed
     *	Purpose:
     *	    This method is called to inform you that the TCP channel has
     *	    been closed by the peer or closed due to error.
     */
    STDMETHOD(Closed)		(THIS_
				HX_RESULT		status) PURE;
};


/****************************************************************************
 * 
 *  Interface:
 * 
 *	IHXTCPSocket
 * 
 *  Purpose:
 * 
 *	Provides the user with an asynchronous TCP networking interface.
 * 
 *  IID_IHXTCPSocket:
 * 
 *	{00000103-0901-11d1-8B06-00A024406D59}
 * 
 */
DEFINE_GUID(IID_IHXTCPSocket, 0x00000103, 0x901, 0x11d1, 0x8b, 0x6, 0x0, 
			0xa0, 0x24, 0x40, 0x6d, 0x59);

#undef  INTERFACE
#define INTERFACE   IHXTCPSocket

DECLARE_INTERFACE_(IHXTCPSocket, IUnknown)
{
    /*
     *  IUnknown methods
     */
    STDMETHOD(QueryInterface)		(THIS_
					REFIID riid,
					void** ppvObj) PURE;

    STDMETHOD_(ULONG32,AddRef)		(THIS) PURE;

    STDMETHOD_(ULONG32,Release)		(THIS) PURE;

    /*
     *	IHXTCPSocket methods
     *
     *  Network addresses and ports are in native byte order
     *  
     */

    STDMETHOD(Init)		(THIS_
				IHXTCPResponse*    /*IN*/  pTCPResponse) PURE;

    STDMETHOD(SetResponse)	(THIS_
    				IHXTCPResponse*	    pTCPResponse) PURE;

    STDMETHOD(Bind)		(THIS_
				UINT32			    ulLocalAddr,
				UINT16 			    nPort) PURE;

    /*
     * pDestination is a string containing host name or dotted-ip notation
     */
    STDMETHOD(Connect)		(THIS_
				const char*		    pDestination,
				UINT16 			    nPort) PURE;

    STDMETHOD(Read)		(THIS_
				UINT16			    Size) PURE;

    STDMETHOD(Write)		(THIS_
				IHXBuffer*		    pBuffer) PURE;

    /************************************************************************
     *	Method:
     *	    IHXTCPSocket::WantWrite
     *	Purpose:
     *	    This method is called when you wish to write a large amount of
     *	    data.  If you are only writing small amounts of data, you can
     *	    just call Write (all data not ready to be transmitted will be
     *	    buffered on your behalf).  When the TCP channel is ready to be
     *	    written to, the response interfaces WriteReady method will be 
     *	    called.
     */
    STDMETHOD(WantWrite)	(THIS) PURE;

    /************************************************************************
     *	Method:
     *	    IHXTCPSocket::GetForeignAddress
     *	Purpose:
     *	    Returns the address of the other end of the TCP socket as a
     *	    ULONG32 in local host order
     */
    STDMETHOD(GetForeignAddress)	(THIS_
    					REF(ULONG32) lAddress) PURE;

    STDMETHOD(GetLocalAddress)		(THIS_
    					REF(ULONG32) lAddress) PURE;

    /************************************************************************
     *	Method:
     *	    IHXTCPSocket::GetForeignPort
     *	Purpose:
     *	    Returns the port of the other end of the TCP socket in local
     *      host order.
     */
    STDMETHOD(GetForeignPort)		(THIS_
    					REF(UINT16) port) PURE;

    STDMETHOD(GetLocalPort)		(THIS_
    					REF(UINT16) port) PURE;
};

// $Private:
/****************************************************************************
 * 
 *  Interface:
 * 
 *	IHXTCPSecureSocket
 * 
 *  Purpose:
 * 
 *	When an IHXTCPSocket also supports this interface,
 *	it allows you to say it's secure so it tries to use
 *	SSL.
 * 
 */
DEFINE_GUID(IID_IHXTCPSecureSocket, 0x00000203, 0x911, 0x21d1, 0x8c, 0x4, 0x0, 
			0xa0, 0x24, 0x40, 0x6d, 0x54);

#undef  INTERFACE
#define INTERFACE   IHXTCPSecureSocket

DECLARE_INTERFACE_(IHXTCPSecureSocket, IUnknown)
{
    /*
     *  IUnknown methods
     */
    STDMETHOD(QueryInterface)		(THIS_
					REFIID riid,
					void** ppvObj) PURE;

    STDMETHOD_(ULONG32,AddRef)		(THIS) PURE;

    STDMETHOD_(ULONG32,Release)		(THIS) PURE;

    /*
     *  IHXTCPSecureSocket method
     */
    STDMETHOD(SetSecure)		(THIS_
    					BOOL bSecure) PURE;
};
// $EndPrivate.



// $Private:
/****************************************************************************
 * 
 *  Interface:
 * 
 *	IHXSSL
 * 
 *  Purpose:
 * 
 *	This is the interface to an SSL library.
 * 
 */
DEFINE_GUID(IID_IHXSSL, 0x34e171d4, 0xa8f0,
           0x4832, 0xbc, 0x7d, 0x06, 0xdf, 0xe3, 0xae, 0x58, 0xfd);

DECLARE_INTERFACE_(IHXSSL, IUnknown)
{
	/*
	 * IUnknown methods
	 */
	

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?