📄 copwavef.cpp
字号:
/* ***** BEGIN LICENSE BLOCK *****
* Source last modified: $Id: copwavef.cpp,v 1.3.28.3 2004/07/09 01:44:17 hubbe Exp $
*
* * Portions Copyright (c) 1995-2002 RealNetworks, Inc. All Rights Reserved.
*
* The contents of this file, and the files included with this file,
* are subject to the current version of the RealNetworks Public
* Source License (the "RPSL") available at
* http://www.helixcommunity.org/content/rpsl unless you have licensed
* the file under the current version of the RealNetworks Community
* Source License (the "RCSL") available at
* http://www.helixcommunity.org/content/rcsl, in which case the RCSL
* will apply. You may also obtain the license terms directly from
* RealNetworks. You may not use this file except in compliance with
* the RPSL or, if you have a valid RCSL with RealNetworks applicable
* to this file, the RCSL. Please see the applicable RPSL or RCSL for
* the rights, obligations and limitations governing use of the
* contents of the file.
*
* Alternatively, the contents of this file may be used under the
* terms of the GNU General Public License Version 2 or later (the
* "GPL") in which case the provisions of the GPL are applicable
* instead of those above. If you wish to allow use of your version of
* this file only under the terms of the GPL, and not to allow others
* to use your version of this file under the terms of either the RPSL
* or RCSL, indicate your decision by deleting the provisions above
* and replace them with the notice and other provisions required by
* the GPL. If you do not delete the provisions above, a recipient may
* use your version of this file under the terms of any one of the
* RPSL, the RCSL or the GPL.
*
* This file is part of the Helix DNA Technology. RealNetworks is the
* developer of the Original Code and owns the copyrights in the
* portions it created.
*
* This file, and the files included with this file, is distributed
* and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY
* KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS
* ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET
* ENJOYMENT OR NON-INFRINGEMENT.
*
* Technology Compatibility Kit Test Suite(s) Location:
* http://www.helixcommunity.org/content/tck
*
* Contributor(s):
*
* ***** END LICENSE BLOCK ***** */
#include "hlxclib/stdio.h"
#include "hlxclib/sys/stat.h"
#include "hlxclib/sys/types.h"
#include "hlxclib/fcntl.h"
//#include "hlxclib/errno.h"
#include "chxdataf.h"
#include "copwavef.h"
#include "hxheap.h"
#include "hxresult.h"
#define HX_FILE_NOT_OPEN -1000
/// TB correctly done
//int errno = 1;
CHXDataFile*
CHXDataFile::Construct (UINT32 ulFlags, IUnknown** ppCommonObj)
{
return new COpenwaveFile;
}
// CHXFile should set the file reference to a value
// indicating the file is not open
COpenwaveFile::COpenwaveFile (void)
{
// set FD to indicate file is not open
mFD = HX_FILE_NOT_OPEN;
mLastError = HXR_OK;
}
// ~CHXFile should close the file if it is open
COpenwaveFile::~COpenwaveFile(void)
{
// close the file if it is open
if ( mFD > 0 )
{
//close( mFD );
OpFsClose( mFD );
}
}
// Following comments and code of GetSize were directly taken from the
// windows implementation ../win/cwinfile.cpp
// Simply uses stat to get the size of the file in bytes. If the file
// is closed, it will still work.
ULONG32 COpenwaveFile::GetSize(void)
{
OpFsStatStruct filestats;
if (mFD >= 0)
{
if (OpFsStat(mFName, &filestats) == kOpFsErrOk)
{
return filestats.size;
}
}
return 0;
}
// Create a file with the specified mode
// (XXXSAB: does Openwave even have a read-only bit/file permissions for
// 'mode'?)
// Closes the previous file if it was open
// returns HXR_OK or HXR_INVALID_FILE if an error occurred
HX_RESULT COpenwaveFile::Create(const char *filename, UINT16 mode, BOOL textflag)
{
// close previous file if necessary
if ( mFD > 0 )
{
//close( mFD );
OpFsClose( mFD );
}
// create file
mLastError = HXR_OK;
// if ( ( mFD = creat( filename, mode ) ) < 0 )
mFD = OpFsOpen(filename, mode, 0);
if (mFD == kOpFsErrAny)
{
mFD = HX_FILE_NOT_OPEN;
mLastError = mFD;
return HXR_DOC_MISSING;
}
mFName = filename;
return HXR_OK;
}
// Open a file with the specified mode
// Closes the previous file if it was open
// returns HXR_OK or HXR_INVALID_FILE if an error occurred
HX_RESULT COpenwaveFile::Open(const char *filename, UINT16 mode, BOOL textflag)
{
// close previous file if necessary
if ( mFD > 0 )
{
// close( mFD );
OpFsClose( mFD );
}
// open file
mLastError = HXR_OK;
mFD = OpFsOpen(filename,
kOpFsFlagWrOnly | kOpFsFlagCreate,
0);
{
mFD = HX_FILE_NOT_OPEN;
mLastError = mFD;
return HXR_DOC_MISSING;
}
mFName = filename;
return HXR_OK;
}
// Close the previous file if it was open
// returns HXR_OK or HXR_INVALID_FILE if an error occurred
HX_RESULT COpenwaveFile::Close(void)
{
// close previous file if necessary
if ( mFD > 0 )
{
mLastError = HXR_OK;
//if ( close( mFD ) < 0 )
if (OpFsClose( mFD ) != kOpFsErrOk )
{
mLastError = HXR_INVALID_FILE;
return HXR_INVALID_FILE;
}
return HXR_OK;
}
return HXR_INVALID_FILE;
}
HX_RESULT COpenwaveFile::Delete(const char* pFilename)
{
if(mFD > 0)
{
//close(mFD);
OpFsClose( mFD );
}
mLastError = HXR_OK;
if(OpFsRemove(pFilename) == kOpFsErrAny)
{
mLastError = HXR_ACCESSDENIED;
}
return mLastError;
}
// Seek moves the current file position to the offset from the fromWhere
// specifier returns HXR_OK or HXR_INVALID_FILE if an error occurred
HX_RESULT COpenwaveFile::Seek(ULONG32 offset, UINT16 fromWhere)
{
if ( mFD > 0 )
{
mLastError = HXR_OK;
//if ( lseek( mFD, offset, fromWhere ) < 0 )'
if (OpFsSeek( mFD, (OpFsSize)offset, fromWhere) == kOpFsErrAny)
{
mLastError = HXR_INVALID_FILE;
return HXR_INVALID_FILE;
}
return HXR_OK;
}
return HXR_INVALID_FILE;
}
// Rewind sets the file position to the start of file
// returns HXR_OK or HXR_INVALID_FILE if an error occurred
HX_RESULT COpenwaveFile::Rewind(void)
{
if ( mFD > 0 )
{
mLastError = HXR_OK;
//if ( lseek( mFD, 0, SEEK_SET ) < 0 )
if (OpFsSeek( mFD, (OpFsSize)0, SEEK_SET) == kOpFsErrAny)
{
mLastError = HXR_INVALID_FILE;
return HXR_INVALID_FILE;
}
return HXR_OK;
}
return HXR_INVALID_FILE;
}
// Tell returns the current file position
// returns HXR_OK or -1 if an error occurred
ULONG32 COpenwaveFile::Tell(void)
{
long offset = -1;
if ( mFD > 0 )
{
mLastError = HXR_OK;
// the tell() function will consistently generate a warning
// and I haven't figured out how to fix that yet
/****
if ((offset = tell( mFD )) < 0 )
{
mLastError = errno;
}
****/
// so we do this instead....
//if ((offset = lseek( mFD, 0, SEEK_CUR )) < 0 )
if (OpFsSeek( mFD, (OpFsSize)0, SEEK_CUR) == kOpFsErrAny)
{
mLastError = HXR_INVALID_FILE;
}
}
return (ULONG32)offset;
}
/* Read reads up to count bytes of data into buf.
returns the number of bytes read, EOF, or -1 if the read failed */
ULONG32 COpenwaveFile::Read (char *buf, ULONG32 count)
{
//int ncnt = -1; // number of bytes read
OpFsSize ncnt = kOpFsErrAny;
if ( mFD > 0 )
{
mLastError = HXR_OK;
ULONG32 tmpCheck = Tell();
//if ( ( ncnt = read( mFD, buf, count ) ) < 0 )
if (( ncnt = OpFsRead( mFD, buf, count)) == kOpFsErrAny)
{
mLastError = HXR_INVALID_FILE;
}
}
return (ULONG32)ncnt;
}
/* Write writes up to count bytes of data from buf.
returns the number of bytes written, or -1 if the write failed */
ULONG32 COpenwaveFile::Write(const char *buf, ULONG32 count)
{
// int ncnt = -1; // number of bytes written
OpFsSize ncnt = kOpFsErrAny;
if ( mFD > 0 )
{
mLastError = HXR_OK;
//if ( ( ncnt = write( mFD, buf, count ) ) < 0 )
if (( ncnt = OpFsWrite( mFD, buf, count)) == kOpFsErrAny)
{
mLastError = HXR_INVALID_FILE;
}
}
return (ULONG32)ncnt;
}
BOOL COpenwaveFile::GetTemporaryFileName(const char *tag, char* name, UINT32 ulBufLen)
{
// TBF
#ifdef Commented_out_code_20030422_132559
if (tmpnam(name))
return TRUE;
else
#endif /* Commented_out_code_20030422_132559 */
return FALSE;
}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -