copyfile.cpp
来自「symbian 下的helix player源代码」· C++ 代码 · 共 253 行
CPP
253 行
/* ***** BEGIN LICENSE BLOCK *****
* Source last modified: $Id: copyfile.cpp,v 1.2.42.3 2004/07/09 01:44:13 hubbe Exp $
*
* Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved.
*
* The contents of this file, and the files included with this file,
* are subject to the current version of the RealNetworks Public
* Source License (the "RPSL") available at
* http://www.helixcommunity.org/content/rpsl unless you have licensed
* the file under the current version of the RealNetworks Community
* Source License (the "RCSL") available at
* http://www.helixcommunity.org/content/rcsl, in which case the RCSL
* will apply. You may also obtain the license terms directly from
* RealNetworks. You may not use this file except in compliance with
* the RPSL or, if you have a valid RCSL with RealNetworks applicable
* to this file, the RCSL. Please see the applicable RPSL or RCSL for
* the rights, obligations and limitations governing use of the
* contents of the file.
*
* Alternatively, the contents of this file may be used under the
* terms of the GNU General Public License Version 2 or later (the
* "GPL") in which case the provisions of the GPL are applicable
* instead of those above. If you wish to allow use of your version of
* this file only under the terms of the GPL, and not to allow others
* to use your version of this file under the terms of either the RPSL
* or RCSL, indicate your decision by deleting the provisions above
* and replace them with the notice and other provisions required by
* the GPL. If you do not delete the provisions above, a recipient may
* use your version of this file under the terms of any one of the
* RPSL, the RCSL or the GPL.
*
* This file is part of the Helix DNA Technology. RealNetworks is the
* developer of the Original Code and owns the copyrights in the
* portions it created.
*
* This file, and the files included with this file, is distributed
* and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY
* KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS
* ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET
* ENJOYMENT OR NON-INFRINGEMENT.
*
* Technology Compatibility Kit Test Suite(s) Location:
* http://www.helixcommunity.org/content/tck
*
* Contributor(s):
*
* ***** END LICENSE BLOCK ***** */
#include <string.h>
#include "hxtypes.h"
#include "copyfile.h"
OSErr DoCopyFile(FSSpec &srcSpec, FSSpec &dstSpec, Boolean moveflag)
{
FInfo dstinfo,srcinfo;
OSErr err = noErr;
short srcRefNum, dstRefNum;
Ptr filePtr = nil;
UINT32 dataleft,fsize,vleft;
long numBytes, blockSize;
if (EqualFSSpec(dstSpec, srcSpec)) return noErr;
err = FSpDelete(&dstSpec);
if (err && err != fnfErr) return err;
if ((dstSpec.vRefNum == srcSpec.vRefNum) && moveflag) { // if on same volume, do it the easy way.
FSSpec dstFolder;
err = FSpRename(&srcSpec,dstSpec.name);
if (err) return err;
memcpy(&dstSpec.name[1],&srcSpec.name[1],srcSpec.name[0]); /* Flawfinder: ignore */
dstSpec.name[0] = srcSpec.name[0];
err = FSMakeFSSpec(dstSpec.vRefNum, dstSpec.parID,NULL, &dstFolder);
if(err) return err;
// if (err = FSSpecFromDirID(dstSpec.vRefNum, dstSpec.parID, dstFolder)) return err;
err = FSpCatMove(&srcSpec,&dstFolder);
if (err) return err;
return noErr;
}
err = GetFileSize(srcSpec,&fsize);
if (err) return err;
vleft = GetVolumeFreeSpace(dstSpec.vRefNum);
if (fsize > vleft) return dskFulErr;
// Get all Finder information for the existing file
err = FSpGetFInfo(&srcSpec,&srcinfo);
if (err) goto here;
// Create the data fork of the new file
FSpCreateResFile(&dstSpec, srcinfo.fdCreator, srcinfo.fdType,smCurrentScript);
err = ResError();
if (err) goto here;
err = FSpGetFInfo(&dstSpec, &dstinfo);
if (err) goto here;
vleft = 0;
// Open up the data fork of the existing file. Copy the entire data fork of the
// source file into the destination file.
blockSize = 0;
err = FSpOpenDF(&srcSpec, fsRdPerm, &srcRefNum);
if (!err) GetEOF(srcRefNum,&blockSize);
dataleft = blockSize;
if (blockSize && !err) {
do {
filePtr = NewPtr(blockSize);
if (!filePtr) blockSize = blockSize * 3L / 4L;
} while (!filePtr);
err = FSpOpenDF(&dstSpec, fsWrPerm, &dstRefNum);
if (!err) {
err = SetFPos(srcRefNum, fsFromStart, 0L);
err = SetFPos(dstRefNum, fsFromStart, 0L);
do {
numBytes = min(blockSize,dataleft);
err = FSRead(srcRefNum, &numBytes, filePtr);
err = FSWrite(dstRefNum, &numBytes, filePtr);
vleft += numBytes;
dataleft -= numBytes;
} while (dataleft);
err = FSClose(dstRefNum);
}
DisposePtr(filePtr);
}
err = FSClose(srcRefNum);
// Open up the resource fork of the existing file. Only if there is a resource fork on the
// existing file do we create a resource fork for the new file. Copy the entire resource fork
// of the source file into the destination file.
blockSize = 0;
err = FSpOpenRF(&srcSpec, fsRdPerm, &srcRefNum);
if (!err) GetEOF(srcRefNum,&blockSize);
dataleft = blockSize;
if (blockSize && !err) {
do {
filePtr = NewPtr(blockSize);
if (!filePtr) blockSize = blockSize * 3L / 4L;
} while (!filePtr);
err = FSpOpenRF(&dstSpec, fsWrPerm, &dstRefNum);
if (!err) {
err = SetEOF(dstRefNum, 0L); // set to zip
err = SetFPos(srcRefNum, fsFromStart, 0L);
err = SetFPos(dstRefNum, fsFromStart, 0L);
do {
numBytes = min(blockSize,dataleft);
err = FSRead(srcRefNum, &numBytes, filePtr);
err = FSWrite(dstRefNum, &numBytes, filePtr);
vleft += numBytes;
dataleft -= numBytes;
} while (dataleft);
err = FSClose(dstRefNum);
}
DisposePtr(filePtr);
}
err = FSClose(srcRefNum);
// Restore the (almost) exact finder information as the original source file
srcinfo.fdLocation.h =
srcinfo.fdLocation.v = -1;
err = FSpSetFInfo(&dstSpec, &srcinfo);
here:
if (moveflag) return FSpDelete(&srcSpec);
return noErr;
}
long GetVolumeFreeSpace(short vRefNum)
{
#ifdef _CARBON
// xxxbobclark PBXGetVolInfoSync exists in OS 8.5 and later, but still
// I'll leave the old code there for all non-Carbon. By only using it
// in Carbon code we'll never even risk calling it accidentally.
XVolumeParam xpb;
xpb.ioCompletion = NULL;
xpb.ioNamePtr = NULL;
xpb.ioVRefNum = vRefNum;
OSErr err = PBXGetVolInfoSync(&xpb);
if (err) return 0;
if (xpb.ioVFreeBytes > 0x000000007fffffff)
{
return 0x7fffffff;
}
return (long)xpb.ioVFreeBytes;
#else
HVolumeParam block;
OSErr err;
long freeSpace = 0L;
Str255 volname = {0};
memset(&block,0,sizeof(HVolumeParam));
block.ioVRefNum = vRefNum;
err = PBHGetVInfoSync((HParmBlkPtr)&block);
if (!err) {
err = GetVInfo(block.ioVDrvInfo,volname,&vRefNum,&freeSpace);
}
return freeSpace;
#endif
}
Boolean EqualFSSpec(FSSpec &srcSpec, FSSpec &dstSpec)
{
Boolean bEqual = srcSpec.vRefNum == dstSpec.vRefNum;
if(bEqual)
{
bEqual = srcSpec.parID == dstSpec.parID;
}
if(bEqual)
{
bEqual = srcSpec.name[0] == dstSpec.name[0];
}
if(bEqual)
{
bEqual = memcmp(&srcSpec.name[1],&dstSpec.name[1],srcSpec.name[0]) == 0;
}
return bEqual;
}
OSErr GetFileSize(FSSpec &srcSpec,UINT32 *fsize)
{
short srcRefNum;
OSErr err = FSpOpenDF(&srcSpec, fsRdPerm, &srcRefNum);
if (!err)
{
err = GetEOF(srcRefNum,(long*)fsize);
FSClose(srcRefNum);
}
if(err)
{
*fsize = 0;
}
return err;
}
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?