ot_udp.cp

来自「symbian 下的helix player源代码」· CP 代码 · 共 693 行 · 第 1/2 页

CP
693
字号
/* ***** BEGIN LICENSE BLOCK *****
 * Source last modified: $Id: ot_udp.cp,v 1.2.36.1 2004/07/09 02:06:38 hubbe Exp $
 * 
 * Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved.
 * 
 * The contents of this file, and the files included with this file,
 * are subject to the current version of the RealNetworks Public
 * Source License (the "RPSL") available at
 * http://www.helixcommunity.org/content/rpsl unless you have licensed
 * the file under the current version of the RealNetworks Community
 * Source License (the "RCSL") available at
 * http://www.helixcommunity.org/content/rcsl, in which case the RCSL
 * will apply. You may also obtain the license terms directly from
 * RealNetworks.  You may not use this file except in compliance with
 * the RPSL or, if you have a valid RCSL with RealNetworks applicable
 * to this file, the RCSL.  Please see the applicable RPSL or RCSL for
 * the rights, obligations and limitations governing use of the
 * contents of the file.
 * 
 * Alternatively, the contents of this file may be used under the
 * terms of the GNU General Public License Version 2 or later (the
 * "GPL") in which case the provisions of the GPL are applicable
 * instead of those above. If you wish to allow use of your version of
 * this file only under the terms of the GPL, and not to allow others
 * to use your version of this file under the terms of either the RPSL
 * or RCSL, indicate your decision by deleting the provisions above
 * and replace them with the notice and other provisions required by
 * the GPL. If you do not delete the provisions above, a recipient may
 * use your version of this file under the terms of any one of the
 * RPSL, the RCSL or the GPL.
 * 
 * This file is part of the Helix DNA Technology. RealNetworks is the
 * developer of the Original Code and owns the copyrights in the
 * portions it created.
 * 
 * This file, and the files included with this file, is distributed
 * and made available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY
 * KIND, EITHER EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS
 * ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES
 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET
 * ENJOYMENT OR NON-INFRINGEMENT.
 * 
 * Technology Compatibility Kit Test Suite(s) Location:
 *    http://www.helixcommunity.org/content/tck
 * 
 * Contributor(s):
 * 
 * ***** END LICENSE BLOCK ***** */

#include "hxcom.h"
#include "hxbuffer.h"
#include "timebuff.h"
#include "hxtick.h"
#include "netbyte.h"
#include "OT_UDP.h"
#include "hxerrors.h"
#include "MWDebug.h"
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <ctype.h>
#include "hxmm.h"

//#define USE_DEFERRED_IMPL 1

OT_UDP::OT_UDP (void)
	
	{ /* begin OT_UDP */
		
		m_pInBuffer = new char[TCP_BUF_SIZE];
		m_bIsBroadcastEnabled = FALSE;
	} /* end OT_UDP */
	
OT_UDP::~OT_UDP (void)
	
	{ /* begin ~OT_UDP */
	
		Cleanup();
		
	} /* end ~OT_UDP */
	
HX_RESULT
OT_UDP::init(UINT32 local_addr, UINT16 port, UINT16 blocking)
{
	HX_RESULT theErr = Create();
	if(!theErr) theErr = ActiveOpen(port);
	if(theErr) Cleanup();
	
	return theErr;
}

void
OT_UDP::done(void)
{
	Cleanup();
}
	
/*----------------------------------------------------------------------------
	Create
	
	Create a UDP endpoint.
	
	Exit:	function result = error code.
----------------------------------------------------------------------------*/

OSErr OT_UDP::Create(void)
{
	OSErr theErr = HXR_OK;
	
	// clear completion flag
	mComplete = false;
	
	// open UDP endpoint
#ifdef USE_DEFERRED_IMPL	
	theErr = OTAsyncOpenEndpoint(OTCreateConfiguration(kUDPName), 0, nil, UDPTCPNotifyProc, this);
#else
#ifdef _CARBON
	theErr = OTAsyncOpenEndpointInContext(OTCreateConfiguration(kUDPName), 0, nil,
			::NewOTNotifyUPP(UDPNotifyProc), this, NULL);
#else
	theErr = OTAsyncOpenEndpoint(OTCreateConfiguration(kUDPName), 0, nil,
			UDPNotifyProc, this);
#endif
#endif
	
	// wait for completion
	if(!theErr) theErr = OTWait();

	// check for errors
	if (theErr || mCode != T_OPENCOMPLETE)
		theErr = HXR_SOCKET_CREATE;
	
	if(!theErr)
	{
		mRef = (EndpointRef) mCookie;	// save UDP provider reference
		mDataArrived = FALSE;
		mDataFlowOn = FALSE;
	}
	
#if 0
	if (!theErr)
	{
	 UINT32 uBufDepth = 0;
	 // XTI_RCVBUF : size of internal buffer
	 // XTI_RCVLOWAT : minimum accumulated size for notification
	OT_net::GetFourByteOption(mRef, XTI_GENERIC, XTI_RCVBUF, &uBufDepth);
	OT_net::GetFourByteOption(mRef, XTI_GENERIC, XTI_RCVLOWAT, &uBufDepth);
	
	OT_net::SetFourByteOption(mRef, XTI_GENERIC, XTI_RCVBUF, 64000);
	OT_net::SetFourByteOption(mRef, XTI_GENERIC, XTI_RCVLOWAT, 32000);
	OT_net::GetFourByteOption(mRef, XTI_GENERIC, XTI_RCVBUF, &uBufDepth);
	OT_net::GetFourByteOption(mRef, XTI_GENERIC, XTI_RCVLOWAT, &uBufDepth);
	OT_net::GetFourByteOption(mRef, XTI_GENERIC, XTI_RCVLOWAT, &uBufDepth);
	}
#endif	
		
	if(theErr) 	// error occured close provider
	{
		if(mRef != 0) OTCloseProvider(mRef);
		mRef = 0;
	}

	mLastError = theErr;
	
	return theErr;
}

		
/*----------------------------------------------------------------------------
	Release 
	
	Release a UDP stream.
	
	Exit:	function result = error code.
	
	Any active connection is also aborted, if necessary, before releasing 
	the stream.
	
----------------------------------------------------------------------------*/

OSErr OT_UDP::Cleanup (void)
{
	OSErr theErr = HXR_OK;
	Boolean abort;

	abort = !mOtherSideHasClosed || !mWeHaveClosed;
	
	if(mRef)
	{
		OTRemoveNotifier(mRef);
		theErr = OTCloseProvider(mRef);
		mRef = 0;
		mConnectionOpen = FALSE;
		mOtherSideHasClosed = TRUE;
		mWeHaveClosed = TRUE;
	}
	
	HX_VECTOR_DELETE(m_pInBuffer);
	
	mLastError = theErr;
	return theErr;
}

/*----------------------------------------------------------------------------
	ActiveOpen 
	
	Open an active stream.
	
			addr = IP address of server.
			port = port number of service.
	
	Exit:	function result = error code.
----------------------------------------------------------------------------*/

 OSErr OT_UDP::ActiveOpen (
 
	UINT16 port)
	
{
	OSErr theErr = HXR_OK;
	InetAddress reqAd,retAd;
	TBind req,ret;
	
	// get Inet address of port
	OTInitInetAddress(&reqAd, port, (InetHost) 0);

	// bind udp to current address and requested port
	req.addr.maxlen = sizeof(struct InetAddress);
	req.addr.len = sizeof(struct InetAddress);
	req.addr.buf = (unsigned char *) &reqAd;
	req.qlen = 1;				// don't care for udp
	ret.addr.maxlen = sizeof(struct InetAddress);
	ret.addr.len = sizeof(struct InetAddress);
	ret.addr.buf = (unsigned char *) &retAd;

	// clear completion flag
	mComplete = false;
	
	// bind provider to return structure
	theErr = OTBind(mRef, &req, &ret);
	if(theErr)
	{
		mLastError = theErr;
		theErr = HXR_BIND;
	}
	
	// wait for bind completion
	if(!theErr)
	{
		theErr = OTWait();
		if(theErr == kOTNoDataErr) theErr = HXR_OK;
		
		if(theErr || mCode != T_BINDCOMPLETE) 
		{
			theErr = theErr ? theErr : HXR_BIND;
			mLastError = theErr;
			theErr = HXR_BIND;
		}
	}

	// get local port
	if(!theErr)
	{
		mLocalPort = reqAd.fPort;
		mConnectionOpen = TRUE;
		mOtherSideHasClosed = FALSE;
		mWeHaveClosed = FALSE;
	}
	
	return theErr;
}

/*----------------------------------------------------------------------------
	write 
	
	write data on a UDP stream.
	
	Entry:	data = pointer to data to send.
			len = length of data to send.
	
	Exit:	function result = error code.
----------------------------------------------------------------------------*/

HX_RESULT
OT_UDP::writeto (
	void 	*buf,
	UINT16 	*size, 
	ULONG32 addr,
	UINT16 	port)
{

	OSStatus	result;
	TUnitData	unitdata;
	InetAddress sin;
	TOption		option;
	HX_RESULT	theErr;
	
	::OTInitInetAddress(&sin, port, addr);

	unitdata.addr.len = sizeof(struct InetAddress);
	unitdata.addr.buf = (UInt8*) &sin;
	unitdata.udata.len = *size;
	unitdata.udata.buf = (UInt8*) buf;

 	if(m_bIsBroadcastEnabled)
 	{
 		unitdata.opt.len = sizeof(option);
 		option.len = kOTFourByteOptionSize;
 		option.level = INET_IP;
#ifdef _MAC_MACHO
 		option.name = kIP_BROADCAST;
#else
 		option.name = IP_BROADCAST;
#endif
 		option.status = 0;
 		option.value[0] = 1;
 		unitdata.opt.buf = (UInt8*) &option;
 	}
 	else
 	{
 		unitdata.opt.len = 0;
 		unitdata.opt.maxlen = 0;
 		unitdata.opt.buf = 0;
 	}

	result = ::OTSndUData(mRef,&unitdata);
	
	if(result == 0)
	{
		return HXR_OK;
	}

	switch(result)
	{
		case kOTFlowErr:
			mDataFlowOn = TRUE;
			theErr = HXR_WOULD_BLOCK;
			break;
			
		case kENOMEMErr:
		case kEBUSYErr:
		case kOTOutStateErr:
		case kEWOULDBLOCKErr:
		case kOTStateChangeErr:
			theErr = HXR_WOULD_BLOCK;
			break;

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?