cnt100.fit

多功能时钟

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 05/24/2006 22:33:04      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "cnt100"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "q0"                           : OUTPUT_PIN = 80     ;
    "q1"                           : OUTPUT_PIN = 72     ;
    "q2"                           : OUTPUT_PIN = 71     ;
    "q3"                           : OUTPUT_PIN = 78     ;
    "s0"                           : OUTPUT_PIN = 69     ;
    "s1"                           : OUTPUT_PIN = 18     ;
    "s2"                           : OUTPUT_PIN = 73     ;
    "s3"                           : OUTPUT_PIN = 70     ;
    "|CNT10:1|:4"                  : LOCATION   = LC8_A24;
    "|CNT10:1|:6"                  : LOCATION   = LC1_A24;
    "|CNT10:1|:8"                  : LOCATION   = LC8_A20;
    "|CNT10:1|:10"                 : LOCATION   = LC7_A24;
    "|CNT10:1|:12"                 : LOCATION   = LC6_A24;
    "|CNT10:3|:4"                  : LOCATION   = LC4_A24;
    "|CNT10:3|:6"                  : LOCATION   = LC3_A24;
    "|CNT10:3|:8"                  : LOCATION   = LC2_A24;
    "|CNT10:3|:10"                 : LOCATION   = LC5_A24;

END;

INTERNAL_INFO "cnt100"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC8_A24,->LC1_A24,->LC8_A20,->LC7_A24,->LC6_A24|";
    LC8_A24 : LORAX = "1:MSW4R0C22,HHR44R0->OH4R0P70|2:PA5R0C19->LC8_A20||";
    LC1_A24 : LORAX = "1:MSW0R0C23,HHR20R0->OH0R0P73|";
    LC8_A20 : LORAX = "1:MSW4R0C18|2:G48R0->OH12R0P18|,2:HHR41R0,PA8R0C23->LC8_A24,->LC1_A24,->LC7_A24,->LC6_A24||";
    LC7_A24 : LORAX = "1:MSW7R0C22|2:HHR25R0,PA3R0C19->LC8_A20|,2:G80R0->OH7R0P69||";
    LC4_A24 : LORAX = "1:MSW3R0C23,V9C23->OV0C23P78|";
    LC3_A24 : LORAX = "1:MSW3R0C22,G31R0->OH3R0P71|";
    LC2_A24 : LORAX = "1:MSW2R0C22,HHR0R0->OH2R0P72|";
    LC5_A24 : LORAX = "1:MSW5R0C22,V15C22->OV0C22P80|";
	LC8_A24 : LORAX2 = "LC8_A20, LC1_A24, LC8_A24, LC7_A24";
	LC1_A24 : LORAX2 = "LC8_A20, LC1_A24, LC8_A24, LC7_A24";
	LC8_A20 : LORAX2 = "X, LC8_A20, LC8_A24, LC7_A24";
	LC7_A24 : LORAX2 = "LC8_A24, LC1_A24, LC8_A20, LC7_A24";
	LC6_A24 : LORAX2 = "LC8_A24, LC1_A24, LC8_A20, LC7_A24";
	LC4_A24 : LORAX2 = "LC4_A24, LC2_A24, LC3_A24, LC5_A24";
	LC3_A24 : LORAX2 = "LC4_A24, LC2_A24, LC3_A24, LC5_A24";
	LC2_A24 : LORAX2 = "X, LC4_A24, LC2_A24, LC5_A24";
	LC5_A24 : LORAX2 = "LC4_A24, LC2_A24, LC3_A24, LC5_A24";
END;