📄 template.plg
字号:
<html>
<body>
<pre>
<h1>礦ision Build Log</h1>
<h2>Project:</h2>
E:\MDK\ID_Secure\ID_Secure.uvproj
Project File Date: 07/27/2011
<h2>Output:</h2>
Build target 'ID_Secure'
compiling main.c...
compiling Board_Configure.c...
compiling stm32f10x_it.c...
compiling system_stm32f10x.c...
compiling core_cm3.c...
compiling misc.c...
compiling stm32f10x_flash.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_usart.c...
assembling startup_stm32f10x_hd.s...
linking...
Program Size: Code=5528 RO-data=336 RW-data=44 ZI-data=1028
FromELF: creating hex file...
".\obj\ID_Secure.axf" - 0 Error(s), 0 Warning(s).
Load "E:\\MDK\\ID_Secure\\obj\\ID_Secure.AXF"
JLink info:-----------
DLL: V4.08b, compiled Jun 30 2009 19:10:31
Firmware: J-Link ARM V8 compiled Dec 16 2010 20:21:29
Hardware: V8.00
Feature(s) : RDI, FlashBP, FlashDL, JFlash, GDBFull
---
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Target info:------------
Device: STM32F103ZE
VTarget = 3.351V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 4
JTAG speed: 2000 kHz
---
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Erase Done.
Programming Done.
Verify OK.
Build target 'ID_Secure'
compiling main.c...
user\src\main.c(29): warning: #550-D: variable "CPUID" was set but never used
linking...
Program Size: Code=5572 RO-data=336 RW-data=44 ZI-data=1036
FromELF: creating hex file...
".\obj\ID_Secure.axf" - 0 Error(s), 1 Warning(s).
Build target 'ID_Secure'
compiling main.c...
user\src\main.c(29): warning: #550-D: variable "CPUID" was set but never used
linking...
Program Size: Code=5568 RO-data=336 RW-data=44 ZI-data=1036
FromELF: creating hex file...
".\obj\ID_Secure.axf" - 0 Error(s), 1 Warning(s).
Load "E:\\MDK\\ID_Secure\\obj\\ID_Secure.AXF"
JLink info:-----------
DLL: V4.08b, compiled Jun 30 2009 19:10:31
Firmware: J-Link ARM V8 compiled Dec 16 2010 20:21:29
Hardware: V8.00
Feature(s) : RDI, FlashBP, FlashDL, JFlash, GDBFull
---
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Target info:------------
Device: STM32F103ZE
VTarget = 3.345V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 4
JTAG speed: 2000 kHz
---
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Erase Done.
Programming Done.
Verify OK.
Build target 'ID_Secure'
linking...
Program Size: Code=5568 RO-data=336 RW-data=44 ZI-data=1036
FromELF: creating hex file...
".\obj\ID_Secure.axf" - 0 Error(s), 0 Warning(s).
Build target 'ID_Secure'
compiling main.c...
user\src\main.c(29): warning: #550-D: variable "code" was set but never used
linking...
.\obj\ID_Secure.axf: Error: L6218E: Undefined symbol CRC_CalcBlockCRC (referred from main.o).
.\obj\ID_Secure.axf: Error: L6218E: Undefined symbol CRC_ResetDR (referred from main.o).
Target not created
Build target 'ID_Secure'
linking...
.\obj\ID_Secure.axf: Error: L6218E: Undefined symbol CRC_CalcBlockCRC (referred from main.o).
.\obj\ID_Secure.axf: Error: L6218E: Undefined symbol CRC_ResetDR (referred from main.o).
Target not created
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -