zixiangguang.c.bak

dsp5509得基因检测程序 基因检测

//*****语音基音检测程序*****//
//采用自相关法进行基音检测程序
//输入：sample[]  语音采样点
//       length  最大样点数
//输出：Pitch[]   基音周期
//参数解释：FRAME--480  帧长度 ； BETWEEN---160  帧与帧间隔；Fs--12000  采样频率
//准备对20个帧进行处理，设置Pitch长度为20，20*480=9600=0x2580,换成采样处理时间为10.88ms
//**************************************************//
//*FUNCTION:对基音检测的(整合成语音回放的一个子程序）封装，加入采集回放主程序中*//

#define FRAME    480
#define BETWEEN  160
#define Fs       12000
//#define length   9600
  
//**Declaration all functions**//
int   PitchDetect(float sample[]);
float Maxfloat(float Buffer[], int length, int *Maxindx);
void  AutoCorrelate(float Buffer[],int length, float Max, float R[]);
float MiddelShap(float Buffer[], int length, int V[],float X[],float Max);
int   MaxIntAbs(int Buffer[],int length);
float MaxFloatAbs( float sample[],int length);
float minor(float x1,float x2);
void  Filter(int x[],float y[],int length);

int * PitchesDetect(int sample[],int length)
{
	float y[FRAME];
 	int i,k=0;
 	int Pitch[20];
 	int *p;
 	p=Pitch;
 	 
 	for (i=0;i<length-FRAME;i+=BETWEEN)
 	{
    	Filter(sample,y,FRAME);      
  	    Pitch[k]=PitchDetect(y);      
  	    k++;
  	    
 	}
    return(p);	
}
 
//*FUNCTION:基音检测*//
int PitchDetect(float sample[])
{
  float Maxhead,Maxtail;
  int N;
  float Max,R[FRAME];

  setmem(R,sizeof(float)*FRAME,0);
	
	//确定门限
  Maxhead = MaxFloatAbs(sample,100);
  Maxtail = MaxFloatAbs(&sample[FRAME-100],100);
  Max     = (0.68*minor(Maxhead,Maxtail));
    //作自相关
  AutoCorrelate(sample,FRAME,Max,R);
  Max     = Maxfloat(&R[20],FRAME-20,&N);
  N      += 20;
  
  if (Max < (0.55 * R[0]))	N=0;
       
  return  N;  
}
   
    
float Maxfloat(float Buffer[], int length, int *Maxindx)
{
  int i;
  float Max;
  
  Max = Buffer[0];
  for( i=1; i<length; i++ )
  {
   	if (Max< Buffer[i])
    {
    	Max    = Buffer[i];
      *Maxindx = i;         
  	}
  }
               
	return Max;
}
       
       
//*FUNCTION:自相关*//
void AutoCorrelate( float Buffer[],int length, float Max, float R[])
{
 	int i, j, V[FRAME];
 	float X[FRAME];
 	
 	R[0]=Middleshap(Buffer,length,V,X,Max);
 	
 	for (j=20; j<160; j++) 
    {
  	   for ( i=j; i<length; i++ )
  	   {
  		 if  ((i+j)<length )
  		 {
      	if  ( V[j]<0 )
      		R[j] = R[j]-X[i+j];
      	else if  ( V[j]>0 ) 
        	R[j] = R[j]+X[i+j];
      }
   	}
  }
}
  
//*FUNCTION:中心削波*//
float MiddelShap( float Buffer[], int length, int V[],float X[],float Max)
{
 	int i, RO = 0;
 
 	for(i = 0;i < length;i++)
    {
  	  if (abs(Buffer[i]) < Max)
      {
   		  V[i] = 0;
        X[i] = 0;
      }
      else if(Buffer[i] > 0)
      {
    	  V[i] = 1;
     	  X[i] = Buffer[i]-Max;
        RO  += X[i];
      }
      else
      {
        V[i]=-1;
        X[i]=Buffer[i]+Max;
        RO-=X[i];
      }//if (abs(Buffer[i]) < Max)
    }//for(i = 0;i < length,i++)

  return RO;
}
   
   
int MaxIntAbs(int Buffer[],int length)
{
  int i,Max;
  
  Max=abs(Buffer[0]);
  
  for(i=1; i<length; i++)
  {
  	if(Max<abs(Buffer[i])) Max = abs(Buffer[i]);
  }
  
	return Max;
}
     
     
float MaxFloatAbs(float sample[],int length)
{
  int i;
  float max;
 	
  max=sample[0];
  for(i=0;i<length;i++)
  {
		if(max < sample[i])	max = sample[i];
  }
	
	return(max);
}
      
      
      
float minor(float x1,float x2)
{
  float x;
  
  x=x1;
  if(x1>x2)	x=x2;
  
  return(x);
}


//*20阶，900Hz的低通滤波器，用来分帧以及滤去高频谐波分量，帧间隔13ms（160个样点）*//
//*语音信号的基音频率大约在80Hz--500Hz左右，一般在100HZ--200Hz之间*//
void Filter(int x[],float y[],int length)
{
	int i,j;
	float H[20]={
					       0.0035270585,-0.0075853243,-0.022130724,-0.037701912,-0.040792551,
		            -0.017618544,  0.037134223,  0.1139423,   0.18955371,  0.23657782,
		             0.23657782,   0.18955371,   0.1139423,   0.037134223,-0.01768544,
		            -0.040792551, -0.037701912, -0.022130724,-0.0075853243,0.0035270585
		          };//*滤波器参数，用matlab的fir1函数求出，默认采用汉明窗窗函数法设计的滤波器，返回参数为其冲击响应*//


	setmem(y,sizeof(float)*length,0);

	for(i=0;i<length-11;i++)//*卷积滤波*//
	{  
		for(j=0;j<20;j++)
	  y[i]+=x[i-j+10]*H[j];//**实现反折，平移，相加功能。即：离散卷积和的功能**//
	}
	
}