cc.timesim_vhw

EDA课程设计（带完整设计报告）

-- F:\VHDL\SHUZIZHONG\SHUZIZHONG
-- VHDL Test Bench created by
-- HDL Bencher 6.1i
-- Sun Dec 07 12:12:41 2008
-- 
-- Notes:
-- 1) This testbench has been automatically generated from
--   your Test Bench Waveform
-- 2) To use this as a user modifiable testbench do the following:
--   - Save it as a file with a .vhd extension (i.e. File->Save As...)
--   - Add it to your project as a testbench source (i.e. Project->Add Source...)
-- 

LIBRARY IEEE;
USE IEEE.STD_LOGIC_1164.ALL;
USE IEEE.STD_LOGIC_ARITH.ALL;
USE IEEE.STD_LOGIC_UNSIGNED.ALL;
USE IEEE.STD_LOGIC_TEXTIO.ALL;
USE STD.TEXTIO.ALL;

ENTITY cc IS
END cc;

ARCHITECTURE testbench_arch OF cc IS
-- If you get a compiler error on the following line,
-- from the menu do Options->Configuration select VHDL 87
FILE RESULTS: TEXT OPEN WRITE_MODE IS "results.txt";
	COMPONENT hour1
		PORT (
			clkh : In  std_logic;
			reset : In  std_logic;
			Hour1 : Buffer  std_logic_vector (3 DOWNTO 0);
			hour2 : Buffer  std_logic_vector (3 DOWNTO 0)
		);
	END COMPONENT;

	SIGNAL clkh : std_logic;
	SIGNAL reset : std_logic;
	SIGNAL Hour1 : std_logic_vector (3 DOWNTO 0);
	SIGNAL hour2 : std_logic_vector (3 DOWNTO 0);

BEGIN
	UUT : hour1
	PORT MAP (
		clkh => clkh,
		reset => reset,
		Hour1 => Hour1,
		hour2 => hour2
	);

	PROCESS -- clock process for clkh,
	BEGIN
		CLOCK_LOOP : LOOP
		clkh <= transport '0';
		WAIT FOR 10 ns;
		clkh <= transport '1';
		WAIT FOR 10 ns;
		WAIT FOR 40 ns;
		clkh <= transport '0';
		WAIT FOR 40 ns;
		END LOOP CLOCK_LOOP;
	END PROCESS;

	PROCESS   -- Process for clkh
		VARIABLE TX_OUT : LINE;
		VARIABLE TX_ERROR : INTEGER := 0;

		PROCEDURE CHECK_Hour1(
			next_Hour1 : std_logic_vector (3 DOWNTO 0);
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			-- If compiler error ("/=" is ambiguous) occurs in the next line of code
			-- change compiler settings to use explicit declarations only
			IF (Hour1 /= next_Hour1) THEN 
				STD.TEXTIO.write(TX_LOC,string'("Error at time="));
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns Hour1="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, Hour1);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_Hour1);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
			END IF;
		END;

		PROCEDURE CHECK_hour2(
			next_hour2 : std_logic_vector (3 DOWNTO 0);
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			-- If compiler error ("/=" is ambiguous) occurs in the next line of code
			-- change compiler settings to use explicit declarations only
			IF (hour2 /= next_hour2) THEN 
				STD.TEXTIO.write(TX_LOC,string'("Error at time="));
				STD.TEXTIO.write(TX_LOC, TX_TIME);
				STD.TEXTIO.write(TX_LOC,string'("ns hour2="));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, hour2);
				STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
				IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_hour2);
				STD.TEXTIO.write(TX_LOC, string'(" "));
				TX_STR(TX_LOC.all'range) := TX_LOC.all;
				STD.TEXTIO.writeline(results, TX_LOC);
				STD.TEXTIO.Deallocate(TX_LOC);
				ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
				TX_ERROR := TX_ERROR + 1;
			END IF;
		END;

		BEGIN
		-- --------------------
		reset <= transport '0';
		-- --------------------
		WAIT FOR 200 ns; -- Time=200 ns
		reset <= transport '1';
		-- --------------------
		WAIT FOR 8060 ns; -- Time=8260 ns
		-- --------------------

		IF (TX_ERROR = 0) THEN 
			STD.TEXTIO.write(TX_OUT,string'("No errors or warnings"));
			STD.TEXTIO.writeline(results, TX_OUT);
			ASSERT (FALSE) REPORT
				"Simulation successful (not a failure).  No problems detected. "
				SEVERITY FAILURE;
		ELSE
			STD.TEXTIO.write(TX_OUT, TX_ERROR);
			STD.TEXTIO.write(TX_OUT, string'(
				" errors found in simulation"));
			STD.TEXTIO.writeline(results, TX_OUT);
			ASSERT (FALSE) REPORT
				"Errors found during simulation"
				SEVERITY FAILURE;
		END IF;
	END PROCESS;
END testbench_arch;

CONFIGURATION hour1_cfg OF cc IS
	FOR testbench_arch
	END FOR;
END hour1_cfg;