en

是一个基于web的linux服务器管理系统

ca_setupok=Your certificate authority has been setup successfully. Users can now use the Webmin Users module to request certificates for themselves.
ca_stop=Shutdown certificate authority
ca_stopmsg=Click this button to stop Webmin from accepting existing certificates or issuing new ones. This will force users to use username and password authentication instead.
ca_stopok=Your certificate authority has been successfully shut down.
ca_eminiserv=SSL client certificates are only supported under miniserv.
ca_eversion=The version of the Perl Net::SSLeay module installed on your system does not support SSL client certificates.
ca_essleay=The SSL administration command $1 was not found on your system. You may need to change the path in the Webmin Users module configuration.
ca_essl=SSL certification can only be setup when the webserver is running in SSL mode.

session_title=Authentication
session_desc1=When enabled, password timeouts protect your Webmin server from brute-force password cracking attacks by adding a continuously expanding delay between each failed login attempt for the same user.
session_desc2=When session authentication is enabled, each logged in users' session will be tracked by Webmin, making it possible for idle users to be automatically logged out. Be aware that enabling or disabling session authentication may force all users to re-login.
session_header=Authentication and session options
session_pdisable=Disable password timeouts
session_penable=Enable password timeouts
session_blockhost=Block hosts with more than $1 failed logins for $2 seconds.
session_syslog2=Log blocked hosts, logins and authentication failures to <tt>syslog</tt>
session_disable=Disable session authentication
session_enable=Enable session authentication
session_localoff=Always require username and password
session_localon=Allow login without password for matching users from localhost
session_logout=Auto-logout after $1 minutes of inactivity
session_locking=Enable locking in Webmin
session_err=Failed to save authentication
session_elogouttime=Missing or invalid logout time
session_eblockhost_time=Missing or invalid blocking time
session_eblockhost_failures=Missing or invalid blocking logins
session_ecookie=Your browser does not support cookies, which are required for session authentication
session_elsof=Local authentication requires the <tt>lsof</tt> program
session_remember=Offer to remember login permanently?
session_hostname=Show hostname on login screen?
session_realname=Show real hostname instead of name from URL?
session_pamon=Use PAM for Unix authentication, if available
session_pamoff=Never use PAM for Unix authentication
session_pfile=If PAM is unavailable or disabled, read users and passwords from file $1 columns $2 and $3
session_epasswd_file=Invalid unix users file
session_epasswd_uindex=Missing or invalid unix username index
session_epasswd_pindex=Missing or invalid unix password index
session_banner1=No pre-login page
session_banner0=Show pre-login file
session_ebanner=Missing or invalid pre-login file
session_extauth=External squid-style authentication program
session_eextauth=Missing or invalid external authentication program
session_pmodedesc=When using a password file for authentication ..
session_pmode0=Always deny users with expired passwords
session_pmode1=Always allow users with expired passwords
session_pmode2=Prompt users with expired passwords to enter a new one

assignment_title=Reassign Modules
assignment_header=Module category assignments
assignment_ok=Change Categories
assignment_desc=This form allows you to configure which category each module is displayed under on the Webmin index page.

categories_title=Edit Categories
categories_header=Category ID and descriptions
categories_desc=This form allows you to rename the existing Webmin categories and create new ones to assign modules to. The top part of the table is for changing the descriptions of the built-in categories, while the bottom part is for adding new category IDs and descriptions.
categories_ok=Save Categories
categories_err=Failed to save categories
categories_edesc=Missing description for $1
categories_ecat=Category ID $1 is already taken
categories_code=ID
categories_name=Displayed description

log_access=Changed IP access control
log_bind=Changed port and address
log_log=Changed logging options
log_proxy=Changed proxy servers
log_ui=Changed user interface options
log_install=Installed module $1
log_tinstall=Installed theme $1
log_clone=Cloned module $1 to $2
log_delete=Deleted module $1
log_os=Changed operating system
log_lang=Changed global language
log_startpage=Changed index page options
log_upgrade=Upgraded Webmin to version $1
log_session=Changed authentication options
log_ssl=Changed SSL encryption mode
log_newkey=Created new SSL key
log_setupca=Set up certificate authority
log_changeca=Changed certificate authority
log_stopca=Shut down certificate authority
log_assignment=Changed module categories
log_categories=Changed category names
log_theme=Change theme to $1
log_theme_def=Changed theme to Webmin default
log_referers=Changed trusted referrers

themes_title=Webmin Themes
themes_desc=Themes control the appearance of the Webmin user interface, including icons, colours, backgrounds and possibly the layout of pages. The selection box below can be used to choose one of the themes installed on your system.
themes_sel=Current theme :
themes_default=Old Webmin theme
themes_change=Change
themes_installdesc=Use the form below to install a new Webmin theme on your system. Themes are typically distributed in <tt>.wbt</tt> files, but can also be installed from RPM files if supported by your operating system.
themes_installok=Install Theme

themes_err1=Failed to install theme from $1
themes_efile=File does not exist
themes_err2=Failed to install uploaded theme
themes_ebrowser=Your browser does not support file uploads
themes_err3=Failed to install theme from $1
themes_eurl=Invalid URL
themes_etar=Not a valid theme file : $1
themes_einfo=Theme $1 is missing a theme.info file
themes_enone=File does not appear to contain any themes
themes_eextract=Extract failed : $1
themes_done=The following themes have been successfully installed on your system :
themes_line=$1 in $2 ($3 kB)
themes_ecomp=File is compressed, but the $1 command was not found on your system
themes_ecomp2=Failed to uncompress file : $1
themes_egzip=File is gzipped, but the $1 command was not found on your system
themes_egzip2=Failed to gunzip file : $1
themes_erpm=Not a Webmin theme RPM
themes_eirpm=RPM install failed : $1
themes_ok=Theme changed successfully .. redirecting to the Webmin index page.
themes_delete=This form can be used to delete one of the themes installed on your system that is not currently in use.
themes_delok=Theme to delete :

referers_title=Trusted Referrers
referers_desc=This page allows you to configure Webmin's referrer checking support, which is used to prevent malicious links from other websites tricking your browser into doing dangerous things with Webmin. However, if you have links to Webmin from your own websites that you don't want to be warned about you should add those sites to the list below.
referers_list=Trusted websites
referers_none=Trust links from unknown referrers
referers_referer=Referrer checking enabled?

syslet_title=Syslet Auto-Download
syslet_desc=This page is for configuring the automatic download and install of missing Eazel Syslets to your Webmin server.
syslet_auto=Automatically download syslets?
syslet_base=Base URLs for syslet RPMs
syslet_err=Failed to save syslet options
syslet_ebase=Invalid base URL

update_err=Failed to update modules
update_eurl=Missing or invalid update URL
update_title=Update Modules
update_info=Updating Webmin modules ..
update_mmissing=Module $1 is not installed on this system.
update_malready=Module $1 is already up to date.
update_mshow=Update needed for module $1 to version $2.
update_mok=Updating module $1 to version $2.
update_fixes=Fixes problem
update_mdesc=Installed module $1 ($2 Kb)
update_mos=Update to module $1 is not needed on your system.
update_efile=Invalid module updates source file
update_ehour=Missing or invalid hour to update on
update_emins=Missing or invalid minute to update on
update_edays=Missing or invalid number of days
update_rv=Checking for updated Webmin modules from $1
update_eemail=You must enter an email address if only showing what would be updated.
update_subject=Webmin modules update report
update_version=A new release of Webmin (version $1) is now available for download. Future updates will be released only for the latest version.

anon_title=Anonymous Module Access
anon_desc=This page allows you to grant access to selected Webmin modules and paths without clients needing to login. For each module path that you enter below (such as <tt>/custom</tt> or <tt>/passwd</tt>) you must also enter the name of a Webmin user whose permissions will be used for access to the module.
anon_desc2=You should be VERY careful when granting anonymous access, as insufficient IP access controls or granting access to the wrong module may allow attackers to take over your system.
anon_url=URL path
anon_user=Webmin user
anon_err=Failed to save anonymous access
anon_eurl='$1' is not a valid URL path
anon_euser=Missing or invalid Webmin user for URL path '$1'

enogpg=GnuPG is not installed

standard_failed=Failed to download modules list : $1
standard_header=Standard Webmin modules
standard_warn=Warning - you are not running the latest Webmin version $1, so thse modules will probably fail to install.
standard_eurl=Invalid standard modules URL

third_failed=Failed to download modules list : $1
third_header=Third Party Webmin modules
third_eurl=Invalid third party modules URL