makefile.in

gcc的组建

EXAMPLE_ZIP = examples.zip

# Extra objects that will not exist until configure-time
BUILT_SOURCES = $(EXAMPLE_ZIP)

# the png icons we use in some of the examples.
EXAMPLE_ICONS = $(srcdir)/gnu/classpath/examples/icons/*.png

# The example specific README files.
READMES = $(srcdir)/gnu/classpath/examples/CORBA/swing/README.html

# All the files we find "interesting"
ALL_EXAMPLE_FILES = $(EXAMPLE_JAVA_FILES) $(EXAMPLE_C_FILES) $(EXAMPLE_ICONS) $(READMES)

# Some architecture independent data to be installed.
example_DATA = $(EXAMPLE_ZIP) README

# Where we want these data files installed.
exampledir = $(pkgdatadir)/examples

# Make sure everything is included in the distribution.
EXTRA_DIST = README Makefile.jawt.in
all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-am

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  examples/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  examples/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
Makefile.jawt: $(top_builddir)/config.status $(srcdir)/Makefile.jawt.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:
install-exampleDATA: $(example_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(exampledir)" || $(mkdir_p) "$(DESTDIR)$(exampledir)"
	@list='$(example_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(exampleDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(exampledir)/$$f'"; \
	  $(exampleDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(exampledir)/$$f"; \
	done

uninstall-exampleDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(example_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(exampledir)/$$f'"; \
	  rm -f "$(DESTDIR)$(exampledir)/$$f"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-am
all-am: Makefile $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(exampledir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-data-local install-exampleDATA

install-exec-am:

install-info: install-info-am

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-exampleDATA uninstall-info-am uninstall-local

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	clean-local dist-hook distclean distclean-generic \
	distclean-libtool distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-data-local install-exampleDATA install-exec \
	install-exec-am install-info install-info-am install-man \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	uninstall uninstall-am uninstall-exampleDATA uninstall-info-am \
	uninstall-local

@FOUND_ECJ_FALSE@@FOUND_GCJX_FALSE@@FOUND_GCJ_FALSE@@FOUND_JIKES_FALSE@error dunno how to setup the JCOMPILER and compile

# Make sure all sources and icons are also installed so users can use them.
# (Be careful to strip off the srcdir part of the path when installing.)
install-data-local:
	srcdir_cnt=`echo $(srcdir) | wc -c`; \
	for file in $(ALL_EXAMPLE_FILES); do \
	  f=`echo $$file | cut -c$$srcdir_cnt-`; \
	  fdir=`dirname $$f`; \
	  if test ! -d $(DESTDIR)/$(pkgdatadir)/examples/$$fdir; then \
	    echo "$(mkinstalldirs) $(DESTDIR)/$(pkgdatadir)/examples/$$fdir"; \
	    $(mkinstalldirs) $(DESTDIR)/$(pkgdatadir)/examples/$$fdir; \
	  fi; \
	  echo "$(INSTALL_DATA) $$file $(DESTDIR)/$(pkgdatadir)/examples/$$f"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)/$(pkgdatadir)/examples/$$f; \
	done
	echo "$(INSTALL_DATA) Makefile.jawt $(DESTDIR)/$(pkgdatadir)/examples/"
	$(INSTALL_DATA) Makefile.jawt $(DESTDIR)/$(pkgdatadir)/examples/

uninstall-local:
	srcdir_cnt=`echo $(srcdir) | wc -c`; \
	for file in $(ALL_EXAMPLE_FILES); do \
	  f=`echo $$file | cut -c$$srcdir_cnt-`; \
	  echo "rm -f $(DESTDIR)/$(pkgdatadir)/examples/$$f"; \
	  rm -f $(DESTDIR)/$(pkgdatadir)/examples/$$f; \
	done
	echo "rm -f $(DESTDIR)/$(pkgdatadir)/examples/Makefile.jawt"
	rm -f $(DESTDIR)/$(pkgdatadir)/examples/Makefile.jawt
dist-hook:
	srcdir_cnt=`echo $(srcdir) | wc -c`; \
	for file in $(ALL_EXAMPLE_FILES); do \
	  f=`echo $$file | cut -c$$srcdir_cnt-`; \
	  fdir=`dirname $$f`; \
	  if test ! -d $(distdir)/$$fdir; then \
	    echo "$(makeinstalldirs) $(distdir)/$$fdir"; \
	    $(mkinstalldirs) $(distdir)/$$fdir; \
	  fi; \
	  echo "cp -p $$file $(distdir)/$$f"; \
	  cp -p $$file $(distdir)/$$f; \
	done

# To generate the example zip just depend on the sources and ignore the
# class files. Always regenerate all .class files and remove them immediatly.
# And copy the png icons we use to the classes dir so they get also included.
$(EXAMPLE_ZIP): $(EXAMPLE_JAVA_FILES)
	mkdir -p classes/gnu/classpath/examples/icons
	cp $(EXAMPLE_ICONS) classes/gnu/classpath/examples/icons
	$(JCOMPILER) -d classes $(EXAMPLE_JAVA_FILES) 
	cd classes; $(ZIP) -r ../$(EXAMPLE_ZIP) .; cd ..
	rm -rf classes

# Zip file be gone! (and make sure the classes are gone too)
clean-local:
	rm -rf $(EXAMPLE_ZIP) classes
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: