⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 gc_pmark.h

📁 gcc的组建
💻 H
字号:
/* * Copyright (c) 1991-1994 by Xerox Corporation.  All rights reserved. * Copyright (c) 2001 by Hewlett-Packard Company. All rights reserved. * * THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED * OR IMPLIED.  ANY USE IS AT YOUR OWN RISK. * * Permission is hereby granted to use or copy this program * for any purpose,  provided the above notices are retained on all copies. * Permission to modify the code and to distribute modified code is granted, * provided the above notices are retained, and a notice that the code was * modified is included with the above copyright notice. * *//* Private declarations of GC marker data structures and macros *//* * Declarations of mark stack.  Needed by marker and client supplied mark * routines.  Transitively include gc_priv.h. * (Note that gc_priv.h should not be included before this, since this * includes dbg_mlc.h, which wants to include gc_priv.h AFTER defining * I_HIDE_POINTERS.) */#ifndef GC_PMARK_H# define GC_PMARK_H# include "gc.h"	/* For configuration */# if defined(KEEP_BACK_PTRS) || defined(PRINT_BLACK_LIST)#   include "dbg_mlc.h"# endif# ifndef GC_MARK_H#   include "../gc_mark.h"# endif# ifndef GC_PRIVATE_H#   include "gc_priv.h"# endif/* The real declarations of the following is in gc_priv.h, so that	*//* we can avoid scanning the following table.				*//*extern mark_proc GC_mark_procs[MAX_MARK_PROCS];*//* * Mark descriptor stuff that should remain private for now, mostly * because it's hard to export WORDSZ without including gcconfig.h. */# define BITMAP_BITS (WORDSZ - GC_DS_TAG_BITS)# define PROC(descr) \	(GC_mark_procs[((descr) >> GC_DS_TAG_BITS) & (GC_MAX_MARK_PROCS-1)])# define ENV(descr) \	((descr) >> (GC_DS_TAG_BITS + GC_LOG_MAX_MARK_PROCS))# define MAX_ENV \  	(((word)1 << (WORDSZ - GC_DS_TAG_BITS - GC_LOG_MAX_MARK_PROCS)) - 1)extern word GC_n_mark_procs;/* Number of mark stack entries to discard on overflow.	*/#define GC_MARK_STACK_DISCARDS (INITIAL_MARK_STACK_SIZE/8)typedef struct GC_ms_entry {    GC_word * mse_start;   /* First word of object */    GC_word mse_descr;	/* Descriptor; low order two bits are tags,	*/    			/* identifying the upper 30 bits as one of the	*/    			/* following:					*/} mse;extern word GC_mark_stack_size;extern mse * GC_mark_stack_limit;#ifdef PARALLEL_MARK  extern mse * VOLATILE GC_mark_stack_top;#else  extern mse * GC_mark_stack_top;#endifextern mse * GC_mark_stack;#ifdef PARALLEL_MARK    /*     * Allow multiple threads to participate in the marking process.     * This works roughly as follows:     *  The main mark stack never shrinks, but it can grow.     *     *	The initiating threads holds the GC lock, and sets GC_help_wanted.     *       *  Other threads:     *     1) update helper_count (while holding mark_lock.)     *	   2) allocate a local mark stack     *     repeatedly:     *		3) Steal a global mark stack entry by atomically replacing     *		   its descriptor with 0.     *		4) Copy it to the local stack.     *	        5) Mark on the local stack until it is empty, or     *		   it may be profitable to copy it back.     *	        6) If necessary, copy local stack to global one,     *		   holding mark lock.     *    7) Stop when the global mark stack is empty.     *    8) decrement helper_count (holding mark_lock).     *     * This is an experiment to see if we can do something along the lines     * of the University of Tokyo SGC in a less intrusive, though probably     * also less performant, way.     */    void GC_do_parallel_mark();		/* inititate parallel marking.	*/    extern GC_bool GC_help_wanted;	/* Protected by mark lock	*/    extern unsigned GC_helper_count;	/* Number of running helpers.	*/					/* Protected by mark lock	*/    extern unsigned GC_active_count;	/* Number of active helpers.	*/					/* Protected by mark lock	*/					/* May increase and decrease	*/					/* within each mark cycle.  But	*/					/* once it returns to 0, it	*/					/* stays zero for the cycle.	*/    /* GC_mark_stack_top is also protected by mark lock.	*/    extern mse * VOLATILE GC_first_nonempty;					/* Lowest entry on mark stack	*/					/* that may be nonempty.	*/					/* Updated only by initiating 	*/					/* thread.			*/    /*     * GC_notify_all_marker() is used when GC_help_wanted is first set,     * when the last helper becomes inactive,     * when something is added to the global mark stack, and just after     * GC_mark_no is incremented.     * This could be split into multiple CVs (and probably should be to     * scale to really large numbers of processors.)     */#endif /* PARALLEL_MARK *//* Return a pointer to within 1st page of object.  	*//* Set *new_hdr_p to corr. hdr.				*/#ifdef __STDC__  ptr_t GC_find_start(ptr_t current, hdr *hhdr, hdr **new_hdr_p);#else  ptr_t GC_find_start();#endifmse * GC_signal_mark_stack_overflow GC_PROTO((mse *msp));# ifdef GATHERSTATS#   define ADD_TO_ATOMIC(sz) GC_atomic_in_use += (sz)#   define ADD_TO_COMPOSITE(sz) GC_composite_in_use += (sz)# else#   define ADD_TO_ATOMIC(sz)#   define ADD_TO_COMPOSITE(sz)# endif/* Push the object obj with corresponding heap block header hhdr onto 	*//* the mark stack.							*/# define PUSH_OBJ(obj, hhdr, mark_stack_top, mark_stack_limit) \{ \    register word _descr = (hhdr) -> hb_descr; \        \    if (_descr == 0) { \    	ADD_TO_ATOMIC((hhdr) -> hb_sz); \    } else { \        ADD_TO_COMPOSITE((hhdr) -> hb_sz); \        mark_stack_top++; \        if (mark_stack_top >= mark_stack_limit) { \          mark_stack_top = GC_signal_mark_stack_overflow(mark_stack_top); \        } \        mark_stack_top -> mse_start = (obj); \        mark_stack_top -> mse_descr = _descr; \    } \}/* Push the contents of current onto the mark stack if it is a valid	*//* ptr to a currently unmarked object.  Mark it.			*//* If we assumed a standard-conforming compiler, we could probably	*//* generate the exit_label transparently.				*/# define PUSH_CONTENTS(current, mark_stack_top, mark_stack_limit, \		       source, exit_label) \{ \    hdr * my_hhdr; \    ptr_t my_current = current; \ \    GET_HDR(my_current, my_hhdr); \    if (IS_FORWARDING_ADDR_OR_NIL(my_hhdr)) { \	 hdr * new_hdr = GC_invalid_header; \         my_current = GC_find_start(my_current, my_hhdr, &new_hdr); \         my_hhdr = new_hdr; \    } \    PUSH_CONTENTS_HDR(my_current, mark_stack_top, mark_stack_limit, \		  source, exit_label, my_hhdr);	\exit_label: ; \}/* As above, but use header cache for header lookup.	*/# define HC_PUSH_CONTENTS(current, mark_stack_top, mark_stack_limit, \		       source, exit_label) \{ \    hdr * my_hhdr; \    ptr_t my_current = current; \ \    HC_GET_HDR(my_current, my_hhdr, source); \    PUSH_CONTENTS_HDR(my_current, mark_stack_top, mark_stack_limit, \		  source, exit_label, my_hhdr);	\exit_label: ; \}/* Set mark bit, exit if it was already set.	*/# ifdef USE_MARK_BYTES    /* Unlike the mark bit case, there is a race here, and we may set	*/    /* the bit twice in the concurrent case.  This can result in the	*/    /* object being pushed twice.  But that's only a performance issue.	*/#   define SET_MARK_BIT_EXIT_IF_SET(hhdr,displ,exit_label) \    { \        register VOLATILE char * mark_byte_addr = \				hhdr -> hb_marks + ((displ) >> 1); \        register char mark_byte = *mark_byte_addr; \          \	if (mark_byte) goto exit_label; \	*mark_byte_addr = 1;  \    } # else#   define SET_MARK_BIT_EXIT_IF_SET(hhdr,displ,exit_label) \    { \        register word * mark_word_addr = hhdr -> hb_marks + divWORDSZ(displ); \          \        OR_WORD_EXIT_IF_SET(mark_word_addr, (word)1 << modWORDSZ(displ), \			    exit_label); \    } # endif /* USE_MARK_BYTES *//* If the mark bit corresponding to current is not set, set it, and 	*//* push the contents of the object on the mark stack.  For a small 	*//* object we assume that current is the (possibly interior) pointer	*//* to the object.  For large objects we assume that current points	*//* to somewhere inside the first page of the object.  If		*//* GC_all_interior_pointers is set, it may have been previously 	*//* adjusted to make that true.						*/# define PUSH_CONTENTS_HDR(current, mark_stack_top, mark_stack_limit, \		           source, exit_label, hhdr) \{ \    int displ;  /* Displacement in block; first bytes, then words */ \    int map_entry; \    \    displ = HBLKDISPL(current); \    map_entry = MAP_ENTRY((hhdr -> hb_map), displ); \    displ = BYTES_TO_WORDS(displ); \    if (map_entry > CPP_MAX_OFFSET) { \	if (map_entry == OFFSET_TOO_BIG) { \	  map_entry = displ % (hhdr -> hb_sz); \	  displ -= map_entry; \	  if (displ + (hhdr -> hb_sz) > BYTES_TO_WORDS(HBLKSIZE)) { \	    GC_ADD_TO_BLACK_LIST_NORMAL((word)current, source); \	    goto exit_label; \	  } \	} else { \          GC_ADD_TO_BLACK_LIST_NORMAL((word)current, source); goto exit_label; \	} \    } else { \        displ -= map_entry; \    } \    GC_ASSERT(displ >= 0 && displ < MARK_BITS_PER_HBLK); \    SET_MARK_BIT_EXIT_IF_SET(hhdr, displ, exit_label); \    GC_STORE_BACK_PTR((ptr_t)source, (ptr_t)HBLKPTR(current) \				      + WORDS_TO_BYTES(displ)); \    PUSH_OBJ(((word *)(HBLKPTR(current)) + displ), hhdr, \    	     mark_stack_top, mark_stack_limit) \}#if defined(PRINT_BLACK_LIST) || defined(KEEP_BACK_PTRS)#   define PUSH_ONE_CHECKED_STACK(p, source) \	GC_mark_and_push_stack(p, (ptr_t)(source))#else#   define PUSH_ONE_CHECKED_STACK(p, source) \	GC_mark_and_push_stack(p)#endif/* * Push a single value onto mark stack. Mark from the object pointed to by p. * Invoke FIXUP_POINTER(p) before any further processing. * P is considered valid even if it is an interior pointer. * Previously marked objects are not pushed.  Hence we make progress even * if the mark stack overflows. */# if NEED_FIXUP_POINTER    /* Try both the raw version and the fixed up one.	*/#   define GC_PUSH_ONE_STACK(p, source) \      if ((ptr_t)(p) >= (ptr_t)GC_least_plausible_heap_addr 	\	 && (ptr_t)(p) < (ptr_t)GC_greatest_plausible_heap_addr) {	\	 PUSH_ONE_CHECKED_STACK(p, source);	\      } \      FIXUP_POINTER(p); \      if ((ptr_t)(p) >= (ptr_t)GC_least_plausible_heap_addr 	\	 && (ptr_t)(p) < (ptr_t)GC_greatest_plausible_heap_addr) {	\	 PUSH_ONE_CHECKED_STACK(p, source);	\      }# else /* !NEED_FIXUP_POINTER */#   define GC_PUSH_ONE_STACK(p, source) \      if ((ptr_t)(p) >= (ptr_t)GC_least_plausible_heap_addr 	\	 && (ptr_t)(p) < (ptr_t)GC_greatest_plausible_heap_addr) {	\	 PUSH_ONE_CHECKED_STACK(p, source);	\      }# endif/* * As above, but interior pointer recognition as for * normal for heap pointers. */# define GC_PUSH_ONE_HEAP(p,source) \    FIXUP_POINTER(p); \    if ((ptr_t)(p) >= (ptr_t)GC_least_plausible_heap_addr 	\	 && (ptr_t)(p) < (ptr_t)GC_greatest_plausible_heap_addr) {	\	    GC_mark_stack_top = GC_mark_and_push( \			    (GC_PTR)(p), GC_mark_stack_top, \			    GC_mark_stack_limit, (GC_PTR *)(source)); \    }/* Mark starting at mark stack entry top (incl.) down to	*//* mark stack entry bottom (incl.).  Stop after performing	*//* about one page worth of work.  Return the new mark stack	*//* top entry.							*/mse * GC_mark_from GC_PROTO((mse * top, mse * bottom, mse *limit));#define MARK_FROM_MARK_STACK() \	GC_mark_stack_top = GC_mark_from(GC_mark_stack_top, \					 GC_mark_stack, \					 GC_mark_stack + GC_mark_stack_size);/* * Mark from one finalizable object using the specified * mark proc. May not mark the object pointed to by  * real_ptr. That is the job of the caller, if appropriate */# define GC_MARK_FO(real_ptr, mark_proc) \{ \    (*(mark_proc))(real_ptr); \    while (!GC_mark_stack_empty()) MARK_FROM_MARK_STACK(); \    if (GC_mark_state != MS_NONE) { \        GC_set_mark_bit(real_ptr); \        while (!GC_mark_some((ptr_t)0)) {} \    } \}extern GC_bool GC_mark_stack_too_small;				/* We need a larger mark stack.  May be	*/				/* set by client supplied mark routines.*/typedef int mark_state_t;	/* Current state of marking, as follows:*/				/* Used to remember where we are during */				/* concurrent marking.			*/				/* We say something is dirty if it was	*/				/* written since the last time we	*/				/* retrieved dirty bits.  We say it's 	*/				/* grungy if it was marked dirty in the	*/				/* last set of bits we retrieved.	*/								/* Invariant I: all roots and marked	*/				/* objects p are either dirty, or point */				/* to objects q that are either marked 	*/				/* or a pointer to q appears in a range	*/				/* on the mark stack.			*/# define MS_NONE 0		/* No marking in progress. I holds.	*/				/* Mark stack is empty.			*/# define MS_PUSH_RESCUERS 1	/* Rescuing objects are currently 	*/				/* being pushed.  I holds, except	*/				/* that grungy roots may point to 	*/				/* unmarked objects, as may marked	*/				/* grungy objects above scan_ptr.	*/# define MS_PUSH_UNCOLLECTABLE 2				/* I holds, except that marked 		*/				/* uncollectable objects above scan_ptr */				/* may point to unmarked objects.	*/				/* Roots may point to unmarked objects	*/# define MS_ROOTS_PUSHED 3	/* I holds, mark stack may be nonempty  */# define MS_PARTIALLY_INVALID 4	/* I may not hold, e.g. because of M.S. */				/* overflow.  However marked heap	*/				/* objects below scan_ptr point to	*/				/* marked or stacked objects.		*/# define MS_INVALID 5		/* I may not hold.			*/extern mark_state_t GC_mark_state;#endif  /* GC_PMARK_H */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -