at91rm9200_sys.h

arch-at91rm9200

/* linux/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h
 * 
 * Hardware definition for the sys peripheral in the ATMEL at91rm9200 processor
 * 
 * Generated  01/09/2006 (16:49:36) AT91 SW Application Group from SYS_AT91RM9200 V1.2
 * 
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 * 
 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 * You should have received a copy of the  GNU General Public License along
 * with this program; if not, write  to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 */


#ifndef __AT91RM9200_SYS_H
#define __AT91RM9200_SYS_H

/* -------------------------------------------------------- */
/* SYS ID definitions for  AT91RM9200           */
/* -------------------------------------------------------- */
#ifndef AT91C_ID_SYS
#define AT91C_ID_SYS   	 1 /**< System Peripheral id */
#endif /* AT91C_ID_SYS */

/* -------------------------------------------------------- */
/* SYS Base Address definitions for  AT91RM9200   */
/* -------------------------------------------------------- */
#define AT91C_BASE_SYS       	0xFFFFF000 /**< SYS base address */

/* -------------------------------------------------------- */
/* PIO definition for SYS hardware peripheral */
/* -------------------------------------------------------- */

/* -------------------------------------------------------- */
/* Register offset definition for SYS hardware peripheral */
/* -------------------------------------------------------- */
#define AIC_SMR 	(0x0000) 	/**< Source Mode Register */
#define AIC_SVR 	(0x0080) 	/**< Source Vector Register */
#define AIC_IVR 	(0x0100) 	/**< IRQ Vector Register */
#define AIC_FVR 	(0x0104) 	/**< FIQ Vector Register */
#define AIC_ISR 	(0x0108) 	/**< Interrupt Status Register */
#define AIC_IPR 	(0x010C) 	/**< Interrupt Pending Register */
#define AIC_IMR 	(0x0110) 	/**< Interrupt Mask Register */
#define AIC_CISR 	(0x0114) 	/**< Core Interrupt Status Register */
#define AIC_IECR 	(0x0120) 	/**< Interrupt Enable Command Register */
#define AIC_IDCR 	(0x0124) 	/**< Interrupt Disable Command Register */
#define AIC_ICCR 	(0x0128) 	/**< Interrupt Clear Command Register */
#define AIC_ISCR 	(0x012C) 	/**< Interrupt Set Command Register */
#define AIC_EOICR 	(0x0130) 	/**< End of Interrupt Command Register */
#define AIC_SPU 	(0x0134) 	/**< Spurious Vector Register */
#define AIC_DCR 	(0x0138) 	/**< Debug Control Register (Protect) */
#define AIC_FFER 	(0x0140) 	/**< Fast Forcing Enable Register */
#define AIC_FFDR 	(0x0144) 	/**< Fast Forcing Disable Register */
#define AIC_FFSR 	(0x0148) 	/**< Fast Forcing Status Register */
#define DBGU_CR 	(0x0200) 	/**< Control Register */
#define DBGU_MR 	(0x0204) 	/**< Mode Register */
#define DBGU_IER 	(0x0208) 	/**< Interrupt Enable Register */
#define DBGU_IDR 	(0x020C) 	/**< Interrupt Disable Register */
#define DBGU_IMR 	(0x0210) 	/**< Interrupt Mask Register */
#define DBGU_CSR 	(0x0214) 	/**< Channel Status Register */
#define DBGU_RHR 	(0x0218) 	/**< Receiver Holding Register */
#define DBGU_THR 	(0x021C) 	/**< Transmitter Holding Register */
#define DBGU_BRGR 	(0x0220) 	/**< Baud Rate Generator Register */
#define DBGU_C1R 	(0x0240) 	/**< Chip ID1 Register */
#define DBGU_C2R 	(0x0244) 	/**< Chip ID2 Register */
#define DBGU_FNTR 	(0x0248) 	/**< Force NTRST Register */
#define DBGU_RPR 	(0x0300) 	/**< Receive Pointer Register */
#define DBGU_RCR 	(0x0304) 	/**< Receive Counter Register */
#define DBGU_TPR 	(0x0308) 	/**< Transmit Pointer Register */
#define DBGU_TCR 	(0x030C) 	/**< Transmit Counter Register */
#define DBGU_RNPR 	(0x0310) 	/**< Receive Next Pointer Register */
#define DBGU_RNCR 	(0x0314) 	/**< Receive Next Counter Register */
#define DBGU_TNPR 	(0x0318) 	/**< Transmit Next Pointer Register */
#define DBGU_TNCR 	(0x031C) 	/**< Transmit Next Counter Register */
#define DBGU_PTCR 	(0x0320) 	/**< PDC Transfer Control Register */
#define DBGU_PTSR 	(0x0324) 	/**< PDC Transfer Status Register */
#define PIOA_PER 	(0x0400) 	/**< PIO Enable Register */
#define PIOA_PDR 	(0x0404) 	/**< PIO Disable Register */
#define PIOA_PSR 	(0x0408) 	/**< PIO Status Register */
#define PIOA_OER 	(0x0410) 	/**< Output Enable Register */
#define PIOA_ODR 	(0x0414) 	/**< Output Disable Registerr */
#define PIOA_OSR 	(0x0418) 	/**< Output Status Register */
#define PIOA_IFER 	(0x0420) 	/**< Input Filter Enable Register */
#define PIOA_IFDR 	(0x0424) 	/**< Input Filter Disable Register */
#define PIOA_IFSR 	(0x0428) 	/**< Input Filter Status Register */
#define PIOA_SODR 	(0x0430) 	/**< Set Output Data Register */
#define PIOA_CODR 	(0x0434) 	/**< Clear Output Data Register */
#define PIOA_ODSR 	(0x0438) 	/**< Output Data Status Register */
#define PIOA_PDSR 	(0x043C) 	/**< Pin Data Status Register */
#define PIOA_IER 	(0x0440) 	/**< Interrupt Enable Register */
#define PIOA_IDR 	(0x0444) 	/**< Interrupt Disable Register */
#define PIOA_IMR 	(0x0448) 	/**< Interrupt Mask Register */
#define PIOA_ISR 	(0x044C) 	/**< Interrupt Status Register */
#define PIOA_MDER 	(0x0450) 	/**< Multi-driver Enable Register */
#define PIOA_MDDR 	(0x0454) 	/**< Multi-driver Disable Register */
#define PIOA_MDSR 	(0x0458) 	/**< Multi-driver Status Register */
#define PIOA_PPUDR 	(0x0460) 	/**< Pull-up Disable Register */
#define PIOA_PPUER 	(0x0464) 	/**< Pull-up Enable Register */
#define PIOA_PPUSR 	(0x0468) 	/**< Pad Pull-up Status Register */
#define PIOA_ASR 	(0x0470) 	/**< Select A Register */
#define PIOA_BSR 	(0x0474) 	/**< Select B Register */
#define PIOA_ABSR 	(0x0478) 	/**< AB Select Status Register */
#define PIOA_OWER 	(0x04A0) 	/**< Output Write Enable Register */
#define PIOA_OWDR 	(0x04A4) 	/**< Output Write Disable Register */
#define PIOA_OWSR 	(0x04A8) 	/**< Output Write Status Register */
#define PIOB_PER 	(0x0600) 	/**< PIO Enable Register */
#define PIOB_PDR 	(0x0604) 	/**< PIO Disable Register */
#define PIOB_PSR 	(0x0608) 	/**< PIO Status Register */
#define PIOB_OER 	(0x0610) 	/**< Output Enable Register */
#define PIOB_ODR 	(0x0614) 	/**< Output Disable Registerr */
#define PIOB_OSR 	(0x0618) 	/**< Output Status Register */
#define PIOB_IFER 	(0x0620) 	/**< Input Filter Enable Register */
#define PIOB_IFDR 	(0x0624) 	/**< Input Filter Disable Register */
#define PIOB_IFSR 	(0x0628) 	/**< Input Filter Status Register */
#define PIOB_SODR 	(0x0630) 	/**< Set Output Data Register */
#define PIOB_CODR 	(0x0634) 	/**< Clear Output Data Register */
#define PIOB_ODSR 	(0x0638) 	/**< Output Data Status Register */
#define PIOB_PDSR 	(0x063C) 	/**< Pin Data Status Register */
#define PIOB_IER 	(0x0640) 	/**< Interrupt Enable Register */
#define PIOB_IDR 	(0x0644) 	/**< Interrupt Disable Register */
#define PIOB_IMR 	(0x0648) 	/**< Interrupt Mask Register */