mpserv_dk9200_run.mbs

AT91RM9200-BasicTools-IAR4_30A-1_2

//*--------------------------------------------------------------------------------------
//*      ATMEL Microcontroller Software Support  -  ROUSSET  -
//*--------------------------------------------------------------------------------------
//* The software is delivered "AS IS" without warranty or condition of any
//* kind, either express, implied or statutory. This includes without
//* limitation any warranty or condition with respect to merchantability or
//* fitness for any particular purpose, or against the infringements of
//* intellectual property rights of others.
//*--------------------------------------------------------------------------------------
//* File Name           : mpserv_dk9200_run.dbs
//* Object              : Setup script for the ATMEL AT91RM9200 board (Green Hills probes) 
//*			with specifc board initialisation including PLL setup
//*
//* 1.0 28/Mar/06 JPP  : Creation
//*--------------------------------------------------------------------------------------
//* This is an empty place holder Setup Script for setting up an AT91RM9200 board
//* for running programs.

//* Set target need only the first connection for Green Hills probes setting
//* mscriptdbg ..\resource\slingshot_setting.mbs

target set clock 10000

//* Reset the processor
echo -- Reset JTAG
target jr
target rst

//* you can wait the Flash initialization
target sleep 2
target halt

echo -- Set the speed of the internal clock?
echo --  Enable main ocilator
memwrite 4 0xFFFFF230 0x0000FF01
echo -- AT91C_BASE_CKGR->CKGR_PLLAR <- 0x20263E04
memwrite 4 0xFFFFFC28 0x20263E04
echo -- AT91C_BASE_CKGR->CKGR_PLLBR <- 0x10483E0E
memwrite 4 0xFFFFFC2C 0x10483e0e
echo -- AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_SLOW_CLK;
memwrite 4 0xFFFFFC30 0x00000000
echo -- AT91C_BASE_PMC->PMC_MCKR = MCKR_Register; 
memwrite 4 0xFFFFFC30 0x00000202


//* test remap
echo -- Setup memory
memwrite 4 0x0 0x0
r0 = * 0x0
if (r0 == 0x0) { 
echo -- already remap  
echo -- Application running !! 

} else {  
echo -- memories, Internal SRAM  > 0x000000000 and Internal ROM  > 0X00100000

echo -- AT91 remap set
memwrite 4 0xFFFFFF00 0x00000001
}

target set clock 8000000

//* echo -- set PIOC as peripheral
memwrite 4 0xFFFFF804 0xFFFF0000
//* echo -- set EBI cs for sdram
memwrite 4 0xFFFFFF60 0x00000002
//* echo -- Init SDRAM
memwrite 4 0xFFFFFF98 0x7fffffd0
memwrite 4 0xFFFFFF90 0x00000002
memwrite 4 0x20000000 0x00000000
memwrite 4 0xFFFFFF90 0x00000004
memwrite 4 0x20000000 0x00000000
memwrite 4 0x20000000 0x00000000
memwrite 4 0x20000000 0x00000000
memwrite 4 0x20000000 0x00000000
memwrite 4 0x20000000 0x00000000
memwrite 4 0x20000000 0x00000000
memwrite 4 0x20000000 0x00000000
memwrite 4 0x20000000 0x00000000
memwrite 4 0xFFFFFF90 0x00000003
memwrite 4 0x20000080 0x00000000
memwrite 4 0xFFFFFF94 0x000001F4
memwrite 4 0x20000000 0x00000000
memwrite 4 0xFFFFFF90 0x00000000
memwrite 4 0x20000000 0x00000000

echo -- Open PIO for USART
memwrite 4 0xFFFFF404 0xC00000
//* Open USART 2 Clock and TC2
memwrite 4 0xFFFFFC10 0x80100


//* Set All register for RESET
echo -- Reset Register
sp = 0x0
lr = 0x0
pc = 0x0000000
cpsr = 0xd3