lpc177x_8x_systick.c

优龙LPC1788开发板资料

/***********************************************************************//**
 * @file		lpc177x_8x_systick.c
 * @brief		Contains all functions support for SYSTICK firmware library on LPC178X
 * @version		1.0
 * @date		18. September. 2010
 * @author		NXP MCU SW Application Team
 **************************************************************************
 * Software that is described herein is for illustrative purposes only
 * which provides customers with programming information regarding the
 * products. This software is supplied "AS IS" without any warranties.
 * NXP Semiconductors assumes no responsibility or liability for the
 * use of the software, conveys no license or title under any patent,
 * copyright, or mask work right to the product. NXP Semiconductors
 * reserves the right to make changes in the software without
 * notification. NXP Semiconductors also make no representation or
 * warranty that such application will be suitable for the specified
 * use without further testing or modification.
 **********************************************************************/

/* Peripheral group ----------------------------------------------------------- */
/** @addtogroup SYSTICK
 * @{
 */

/* Includes ------------------------------------------------------------------- */
#include "lpc177x_8x_systick.h"
#include "lpc177x_8x_clkpwr.h"


/* Public Functions ----------------------------------------------------------- */
/** @addtogroup SYSTICK_Public_Functions
 * @{
 */
/*********************************************************************//**
 * @brief 		Initial System Tick with using internal CPU clock source
 * @param[in]	time	time interval(ms)
 * @return 		None
 * Note: time interval parameter should be less than:
 * 		1/cclk * (2^24) * 1000 (ms)
 * In this case, with cclk = 96Mhz, time interval value < 174ms
 **********************************************************************/
void SYSTICK_InternalInit(uint32_t time)
{
	uint32_t cclk;
	float maxtime;

	cclk = CLKPWR_GetCLK(CLKPWR_CLKTYPE_CPU);

	/* With internal CPU clock frequency for LPC178X is 'SystemCoreClock'
	 * And limit 24 bit for RELOAD value
	 * So the maximum time can be set:
	 * 1/SystemCoreClock * (2^24) * 1000 (ms)
	 */
	//check time value is available or not
	maxtime = (1<<24)/(cclk / 1000) ;

	if(time > maxtime)
	{
		//Error loop
		while(1);
	}
	else
	{
		//Select CPU clock is System Tick clock source
		SysTick->CTRL |= ST_CTRL_CLKSOURCE;

		/* Set RELOAD value
		 * RELOAD = (SystemCoreClock/1000) * time - 1
		 * with time base is millisecond
		 */
		SysTick->RELOAD = (cclk/1000)*time - 1;
	}
}

/*********************************************************************//**
 * @brief 		Initial System Tick with using external clock source
 * @param[in]	freq	external clock frequency(Hz)
 * @param[in]	time	time interval(ms)
 * @return 		None
 **********************************************************************/
void SYSTICK_ExternalInit(uint32_t freq, uint32_t time)
{
	float maxtime;

	/* With external clock frequency for LPC178X is 'freq'
	 * And limit 24 bit for RELOAD value
	 * So the maximum time can be set:
	 * 1/freq * (2^24) * 1000 (ms)
	 */
	//check time value is available or not
	maxtime = (1<<24)/(freq / 1000) ;
	if (time>maxtime)
	{
		//Error Loop
		while(1);
	}
	else
	{
		//Select external clock is System Tick clock source
		SysTick->CTRL &= ~ ST_CTRL_CLKSOURCE;

		/* Set RELOAD value
		 * RELOAD = (freq/1000) * time - 1
		 * with time base is millisecond
		 */
		maxtime = (freq/1000)*time - 1;
		SysTick->RELOAD = (freq/1000)*time - 1;
	}
}

/*********************************************************************//**
 * @brief 		Enable/disable System Tick counter
 * @param[in]	NewState	System Tick counter status, should be:
 * 					- ENABLE
 * 					- DISABLE
 * @return 		None
 **********************************************************************/
void SYSTICK_Cmd(FunctionalState NewState)
{
	if(NewState == ENABLE)
		//Enable System Tick counter
		SysTick->CTRL |= ST_CTRL_ENABLE;
	else
		//Disable System Tick counter
		SysTick->CTRL &= ~ST_CTRL_ENABLE;
}

/*********************************************************************//**
 * @brief 		Enable/disable System Tick interrupt
 * @param[in]	NewState	System Tick interrupt status, should be:
 * 					- ENABLE
 * 					- DISABLE
 * @return 		None
 **********************************************************************/
void SYSTICK_IntCmd(FunctionalState NewState)
{
	if(NewState == ENABLE)
		//Enable System Tick counter
		SysTick->CTRL |= ST_CTRL_TICKINT;
	else
		//Disable System Tick counter
		SysTick->CTRL &= ~ST_CTRL_TICKINT;
}

/*********************************************************************//**
 * @brief 		Get current value of System Tick counter
 * @param[in]	None
 * @return 		current value of System Tick counter
 **********************************************************************/
uint32_t SYSTICK_GetCurrentValue(void)
{
	return (SysTick->CURR);
}

/*********************************************************************//**
 * @brief 		Clear Counter flag
 * @param[in]	None
 * @return 		None
 **********************************************************************/
void SYSTICK_ClearCounterFlag(void)
{
	SysTick->CTRL &= ~ST_CTRL_COUNTFLAG;
}
/**
 * @}
 */

/**
 * @}
 */

/* --------------------------------- End Of File ------------------------------ */