packet-gryphon.h

ethereal公司开发的aodv路由协议代码

/* packet-gryphon.c
 * Definitions for Gryphon packet disassembly structures and routines
 *
 * $Id: packet-gryphon.h,v 1.3 2001/04/25 06:14:53 guy Exp $
 *
 * Ethereal - Network traffic analyzer
 * By Steve Limkemann <[e-mail]>
 * Copyright 1998 Steve Limkemann
 *
 * 
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 * 
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 *
 *
 */

#define MSG_HDR_SZ  	    8
#define CMD_HDR_SZ  	    4

/* source/destinations: */

#define	SD_CARD			0x01	/* (vehicle) network interface */
#define SD_SERVER		0x02
#define SD_CLIENT		0x03
#define SD_KNOWN    	    	0x10	/* Client ID >= are well known */
#define SD_SCHED		0x10	/* scheduler */
#define SD_SCRIPT		0x20	/* script processor */
#define SD_PGM     	    	0x21	/* Program loader */
#define SD_USDT     	    	0x22	/* USDT (Unacknowledged Segmented Data Transfer) */
#define SD_BLM	    	    	0x23	/* Bus Load Monitoring */
#define SD_FLIGHT   	    	0x25	/* Flight Recorder */
#define SD_RESP     	    	0x26	/* Message Response */



/* frame types: */
#define GY_FT_CMD	    0x01    /* command to initiate some action */
#define GY_FT_RESP	    0x02    /* response to a command */
#define GY_FT_DATA	    0x03    /* (vehicle) network data */
#define GY_FT_EVENT	    0x04    /* notification of an event */
#define GY_FT_MISC	    0x05    /* misc data */
#define GY_FT_TEXT	    0x06    /* null-terminated ASCII strings */



/* generic (all SD type) commands: values 0x00 to 0x3f */

#define CMD_INIT		0x01	/* initialize target */
#define CMD_GET_STAT		0x02	/* request status */
#define CMD_GET_CONFIG		0x03	/* request configuration info */
#define CMD_EVENT_ENABLE	0x04	/* Enable event type */
#define CMD_EVENT_DISABLE	0x05	/* Disable event type */
#define CMD_GET_TIME		0x06	/* Get current value of timestamp */
#define CMD_GET_RXDROP		0x07	/* Get count of Rx msgs dropped */
#define CMD_RESET_RXDROP	0x08	/* Set count of Rx msgs dropped to zero */
#define CMD_BCAST_ON		0x09	/* broadcasts on */
#define CMD_BCAST_OFF		0x0a	/* broadcasts off */

/* SD-type specific commands: should start at 0x40, global uniqueness	*/
/* is prefered, but not mandatory.					*/

/* SD_CARD command types: */

#define	CMD_CARD_SET_SPEED	(SD_CARD * 256 + 0x40)	/* set peripheral speed */
#define	CMD_CARD_GET_SPEED	(SD_CARD * 256 + 0x41)	/* get peripheral speed */
#define	CMD_CARD_SET_FILTER	(SD_CARD * 256 + 0x42)	/* set filter to pass or block all */
#define CMD_CARD_GET_FILTER	(SD_CARD * 256 + 0x43)	/* get a pass/block filter */
#define	CMD_CARD_TX		(SD_CARD * 256 + 0x44)	/* transmit message */
#define	CMD_CARD_TX_LOOP_ON	(SD_CARD * 256 + 0x45)	/* set transmit loopback on */
#define	CMD_CARD_TX_LOOP_OFF	(SD_CARD * 256 + 0x46)	/* set transmit loopback off */
#define	CMD_CARD_IOCTL		(SD_CARD * 256 + 0x47)	/* device driver ioctl pass-through */
#define	CMD_CARD_ADD_FILTER	(SD_CARD * 256 + 0x48)	/* add a pass/block filter */
#define	CMD_CARD_MODIFY_FILTER	(SD_CARD * 256 + 0x49)	/* modify a pass/block filter */
#define	CMD_CARD_GET_FILTER_HANDLES (SD_CARD * 256 + 0x4A)/* get a list of filters */
#define	CMD_CARD_SET_DEFAULT_FILTER (SD_CARD * 256 + 0x4B)/* set the default action */
#define	CMD_CARD_GET_DEFAULT_FILTER (SD_CARD * 256 + 0x4C)/* get the defautl action */
#define	CMD_CARD_SET_FILTER_MODE (SD_CARD * 256 + 0x4D)	/* set the client data mode */
#define	CMD_CARD_GET_FILTER_MODE (SD_CARD * 256 + 0x4E)	/* get the client data mode */
#define CMD_CARD_GET_EVNAMES     (SD_CARD * 256 + 0x4f)  /* get event names */
#define CMD_CARD_GET_SPEEDS	 (SD_CARD * 256 + 0x50)	/* get speed definitions */

/* SD_SERVER command types: */

#define CMD_SERVER_REG 		(SD_SERVER * 256 + 0x50)	/* register connection */
#define CMD_SERVER_SET_SORT 	(SD_SERVER * 256 + 0x51)	/* set sorting behavior */
#define CMD_SERVER_SET_OPT  	(SD_SERVER * 256 + 0x52)    	/* set type of optimization */

/* SD_CLIENT command types: */

#define CMD_CLIENT_GET_ID	(SD_CLIENT * 256 + 0x60)	/* get the ID (channel field) of this client? */
#define CMD_CLIENT_SET_ID	(SD_CLIENT * 256 + 0x61)	/* set the ID (channel field) of this client? */
#define CMD_CLIENT_SHUTDOWN	(SD_CLIENT * 256 + 0x62)	/* tell client to die ? */

/* Bus load monitor (SD_BLM) commands: */

#define CMD_BLM_SET_MODE    	(SD_BLM * 256 + 0xA0)
#define CMD_BLM_GET_MODE    	(SD_BLM * 256 + 0xA1)
#define CMD_BLM_GET_DATA    	(SD_BLM * 256 + 0xA2)
#define CMD_BLM_GET_STATS   	(SD_BLM * 256 + 0xA3)

/* Flight recorder (SD_FLIGHT) commands */

#define CMD_FLIGHT_GET_CONFIG	(SD_FLIGHT * 256 + 0x50)	/* get flight recorder channel info */
#define CMD_FLIGHT_START_MON	(SD_FLIGHT * 256 + 0x51)	/* start flight recorder monitoring */
#define CMD_FLIGHT_STOP_MON 	(SD_FLIGHT * 256 + 0x52)	/* stop flight recorder monitoring */

/* Message responder (SD_RESP) commands: */
#define CMD_MSGRESP_ADD    	(SD_RESP * 256 + 0xB0)
#define CMD_MSGRESP_GET    	(SD_RESP * 256 + 0xB1)
#define CMD_MSGRESP_MODIFY    	(SD_RESP * 256 + 0xB2)
#define CMD_MSGRESP_GET_HANDLES (SD_RESP * 256 + 0xB3)

/* Program loader (SD_PGM) commands: */

#define CMD_PGM_DESC	    	(SD_PGM * 256 + 0x90)	/* Describe a program to to uploaded */
#define CMD_PGM_UPLOAD	    	(SD_PGM * 256 + 0x91)	/* Upload a program to the Gryphon */
#define CMD_PGM_DELETE	    	(SD_PGM * 256 + 0x92)	/* Delete an uploaded program */
#define CMD_PGM_LIST	    	(SD_PGM * 256 + 0x93)	/* Get a list of uploaded programs */
#define CMD_PGM_START	    	(SD_PGM * 256 + 0x94)	/* Start an uploaded program */
#define CMD_PGM_STOP	    	(SD_PGM * 256 + 0x95)	/* Stop an uploaded program */
#define CMD_PGM_STATUS	    	(SD_PGM * 256 + 0x96)	/* Get the status of an uploaded program */
#define CMD_PGM_OPTIONS	    	(SD_PGM * 256 + 0x97)	/* Set the upload options */
#define CMD_PGM_FILES	    	(SD_PGM * 256 + 0x98)	/* Get a list of files & directories */

/* Scheduler (SD_SCHED) target commands: */

#define CMD_SCHED_TX		(SD_SCHED * 256 + 0x70)	/* schedule transmission list */
#define CMD_SCHED_KILL_TX	(SD_SCHED * 256 + 0x71)	/* stop and destroy job */
#define CMD_SCHED_STOP_TX	(SD_SCHED * 256 + 0x71)	/* deprecated */

/* USDT (SD_USDT) target commands: */

#define	CMD_USDT_IOCTL		(SD_USDT * 256 + 0x47)	/* Register/Unregister with USDT */


/* response frame (FT_RESP) response field definitions: */

#define RESP_OK			0x00	/* no error */
#define	RESP_UNKNOWN_ERR	0x01	/* unknown error */
#define RESP_UNKNOWN_CMD	0x02	/* unrecognised command */
#define RESP_UNSUPPORTED	0x03	/* unsupported command */
#define RESP_INVAL_CHAN		0x04	/* invalid channel specified */
#define RESP_INVAL_DST		0x05	/* invalid destination */
#define RESP_INVAL_PARAM	0x06	/* invalid parameters */
#define RESP_INVAL_MSG		0x07	/* invalid message */
#define RESP_INVAL_LEN		0x08	/* invalid length field */
#define RESP_TX_FAIL		0x09	/* transmit failed */
#define RESP_RX_FAIL		0x0a	/* receive failed */
#define RESP_AUTH_FAIL		0x0b
#define RESP_MEM_ALLOC_ERR  	0x0c	/* memory allocation error */
#define RESP_TIMEOUT	  	0x0d	/* command timed out */
#define RESP_UNAVAILABLE	0x0e
#define RESP_BUF_FULL		0x0f	/* buffer full */
#define RESP_NO_SUCH_JOB	0x10

/* Flight recorder (SD_FLIGHT) target definitions */

#define FR_RESP_AFTER_EVENT    	    0
#define FR_RESP_AFTER_PERIOD	    1
#define FR_IGNORE_DURING_PER	    2
#define FR_DEACT_AFTER_PER    	    128
#define FR_DEACT_ON_EVENT     	    64
#define FR_DELETE   	    	    32
#define FR_PERIOD_MSGS 	    	    16

/* Filter data types */

#define FILTER_DATA_TYPE_HEADER_FRAME	0x00
#define FILTER_DATA_TYPE_HEADER     	0x01
#define FILTER_DATA_TYPE_DATA	    	0x02
#define FILTER_DATA_TYPE_EXTRA_DATA 	0x03
#define FILTER_EVENT_TYPE_HEADER 	0x04
#define FILTER_EVENT_TYPE_DATA 	    	0x05

/* filter flags */

#define FILTER_PASS_FLAG    	    0x01
#define FILTER_ACTIVE_FLAG  	    0x02

/* Filter and Frame Responder Condition operators */

#define BIT_FIELD_CHECK     	0
#define SVALUE_GT    	    	1
#define SVALUE_GE    	    	2
#define SVALUE_LT    	    	3
#define SVALUE_LE    	    	4
#define VALUE_EQ    	    	5
#define VALUE_NE    	    	6
#define UVALUE_GT    	    	7
#define UVALUE_GE    	    	8
#define UVALUE_LT    	    	9
#define UVALUE_LE    	    	10
#define DIG_LOW_TO_HIGH     	11
#define DIG_HIGH_TO_LOW     	12
#define DIG_TRANSITION	    	13

/* Modes available via CMD_CARD_SET_FILTERING_MODE */
#define FILTER_OFF_PASS_ALL     3
#define FILTER_OFF_BLOCK_ALL    4
#define FILTER_ON               5

/* Modes available via CMD_CARD_SET_DEFAULT_FILTER */
#define DEFAULT_FILTER_BLOCK	0
#define DEFAULT_FILTER_PASS 	1

/* Actions available via CMD_CARD_MODIFY_FILTER */
#define DELETE_FILTER       	0
#define ACTIVATE_FILTER     	1
#define DEACTIVATE_FILTER   	2

/* Flags to modify how FT_CMD (command) messages are handled	    	*/
/* These values are ORed with FT_CMD and stored in the Frame Header's	*/
/* Frame Type field for each response. 	    	    	    	    	*/
#define DONT_WAIT_FOR_RESP  	0x80
#define WAIT_FOR_PREV_RESP  	0x40
#define RESPONSE_FLAGS  	(DONT_WAIT_FOR_RESP | WAIT_FOR_PREV_RESP)


/* Program loader options */
#define PGM_CONV    	    1 	    /* Type of data conversion to perform   */
#define PGM_TYPE    	    2 	    /* Type of file			    */
#define PGM_BIN     	    11 	    /* Binary, no conversion		    */
#define PGM_ASCII   	    12 	    /* ASCII, convert CR LF to LF	    */
#define PGM_PGM     	    21 	    /* Executable			    */
#define PGM_DATA    	    22 	    /* Data				    */




/* IOCTL definitions - comments indicate data size */

#define GINIT		0x11100001
#define GLOOPON		0x11100002
#define GLOOPOFF	0x11100003
#define GGETHWTYPE	0x11100004
#define GGETREG		0x11100005
#define GSETREG		0x11100006
#define GGETRXCOUNT	0x11100007
#define GSETRXCOUNT	0x11100008
#define GGETTXCOUNT	0x11100009
#define GSETTXCOUNT	0x1110000a
#define GGETRXDROP	0x1110000b
#define GSETRXDROP	0x1110000c
#define GGETTXDROP	0x1110000d
#define GSETTXDROP	0x1110000e
#define GGETRXBAD	0x1110000f
#define GGETTXBAD	0x11100011
#define GGETCOUNTS	0x11100013
#define GGETBLMON	0x11100014
#define GSETBLMON	0x11100015
#define GGETERRLEV	0x11100016
#define GSETERRLEV	0x11100017
#define GGETBITRATE	0x11100018
#define GGETRAM		0x11100019
#define GSETRAM		0x1110001a

#define GCANGETBTRS	0x11200001
#define GCANSETBTRS	0x11200002
#define GCANGETBC	0x11200003
#define GCANSETBC	0x11200004
#define GCANGETMODE	0x11200005
#define GCANSETMODE	0x11200006
#define GCANGETTRANS	0x11200009
#define GCANSETTRANS	0x1120000a
#define GCANSENDERR	0x1120000b
#define GCANRGETOBJ	0x11210001
#define GCANRSETSTDID	0x11210002
#define GCANRSETEXTID	0x11210003
#define GCANRSETDATA	0x11210004
#define GCANRENABLE	0x11210005
#define GCANRDISABLE	0x11210006
#define GCANRGETMASKS	0x11210007
#define GCANRSETMASKS	0x11210008
#define GCANSWGETMODE	0x11220001
#define GCANSWSETMODE	0x11220002

#define GDLCGETFOURX	0x11400001
#define GDLCSETFOURX	0x11400002
#define GDLCGETLOAD	0x11400003
#define GDLCSETLOAD	0x11400004
#define GDLCSENDBREAK	0x11400005
#define GDLCABORTTX	0x11400006
#define GDLCGETHDRMODE	0x11400007
#define GDLCSETHDRMODE	0x11400008

#define GHONSLEEP	0x11600001
#define GHONSILENCE	0x11600002

#define GKWPSETPTIMES	0x11700011	
#define GKWPSETWTIMES	0x11700010	
#define GKWPDOWAKEUP	0x11700008	
#define GKWPGETBITTIME	0x11700101	
#define GKWPSETBITTIME	0x11700102	
#define GKWPSETNODEADDR	0x11700104	
#define GKWPGETNODETYPE	0x11700105	
#define GKWPSETNODETYPE	0x11700106	
#define GKWPSETWAKETYPE	0x11700108	
#define GKWPSETTARGADDR	0x1170010a	
#define GKWPSETKEYBYTES	0x1170010c	
#define GKWPSETSTARTREQ	0x1170010e	
#define GKWPSETSTARTRESP	0x11700110
#define GKWPSETPROTOCOL		0x11700112
#define GKWPGETLASTKEYBYTES	0x11700201
#define GKWPSETLASTKEYBYTES	0x11700202

#define GSCPGETBBR	0x11300001
#define GSCPSETBBR	0x11300002
#define GSCPGETID	0x11300003
#define GSCPSETID	0x11300004
#define GSCPADDFUNCID   0x11300005
#define GSCPCLRFUNCID   0x11300006

#define GUBPGETBITRATE          0x11800001
#define GUBPSETBITRATE          0x11800002
#define GUBPGETINTERBYTE        0x11800003
#define GUBPSETINTERBYTE        0x11800004
#define GUBPGETNACKMODE         0x11800005
#define GUBPSETNACKMODE         0x11800006




/* Hardware / driver TYPE and SUBTYPE definitions */

#define GDUMMY		0x01	/* Dummy device driver TYPE */
#define GDGDMARKONE	0x01		/* Dummy device driver SUBTYPE */

#define GCAN		0x02	/* CAN TYPE */
#define G82527		0x01		/* 82527 SUBTYPE */
#define GSJA1000	0x02		/* SJA1000 SUBTYPE */
#define G82527SW	0x03		/* 82527 single wire subtype */

#define GJ1850		0x03	/* 1850 TYPE */
#define GHBCCPAIR	0x01		/* HBCC SUBTYPE */
#define GDLC		0x02		/* GM DLC SUBTYPE */
#define GCHRYSLER	0x03		/* Chrysler SUBTYPE */
#define GDEHC12		0x04		/* DE HC12 KWP/BDLC SUBTYPE */

#define GKWP2000	0x04	/* Keyword protocol 2000 TYPE */
#define GDEHC12KWP	0x01		/* DE HC12 KWP/BDLC card SUBTYPE */

#define GHONDA		0x05	/* Honda UART TYPE */
#define GDGHC08		0x01		/* DG HC08 SUBTYPE */

#define GFORDUBP	0x06	/* FORD UBP TYPE */
#define GDGUBP08	0x01		/* DG HC08 SUBTYPE */


#define SIZEOF(x)   	(sizeof(x)/sizeof(x[0]))

#define MEMCPY(dest, src, size)     	    \
    memcpy (dest, src, size);	    	    \
    *((dest)+size) = 0;


typedef struct val_str_dsp {
    int     value;
    char    *strptr;
    int     (*cmd_fnct)(tvbuff_t *, int, int, int, proto_tree*);
    int     (*rsp_fnct)(tvbuff_t *, int, int, int, proto_tree*);
} val_str_dsp;