并行程序.txt

这是一个编码器的实现的程序

library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
use ieee.std_logic_arith.all;
entity crcm is
port(clk,hrecv,datald: in std_logic;
     sdata: in std_logic_vector(11 downto 0);
      datacrc0: out std_logic_vector(16 downto 0);
      datacrci: in std_logic_vector(16 downto 0);
         rdata: out std_logic_vector(11 downto 0); 
      datafini: out std_logic;
      error0,hsend: out std_logic);
end crcm;
architecture comm of crcm is
constant multi_coef: std_logic_vector(5 downto 0):="110101";
signal cnt,rcnt: std_logic_vector(4 downto 0);
signal dtemp,sdatam,rdtemp: std_logic_vector(11 downto 0);
signal rdatacrc: std_logic_vector(16 downto 0);
signal st,rt:std_logic;
begin
process(clk)
variable crcvar:std_logic_vector(5 downto 0);
begin
if (clk'event and clk='1') then
  if (st='0' and datald='1') then dtemp<=sdata;
sdatam<=sdata;cnt<=(others=>'0');hsend<='0';st<='1';
  elsif (st='1' and cnt<7) then cnt<=cnt+1;
  if dtemp(11)='1' then crcvar:=dtemp(11 downto 6) xor multi_coef;
  dtemp<=crcvar(4 downto 0)&dtemp(5 downto 0)&'0';
   else dtemp<=dtemp(10 downto 0)&'0';
    end if;
  elsif (st='1' and cnt=7) then datacrc0<=sdatam&dtemp(11 downto 7);
       hsend<='1';cnt<=cnt+1;
    elsif (st='1' and cnt=8) then hsend<='0';st<='0';
    end if;
    end if;
end process;
process(hrecv,clk)
variable rcrcvar:std_logic_vector(5 downto 0);
begin
if (clk'event and clk='1') then
 if (rt='0' and hrecv='1') then rdtemp<=datacrci(16 downto 5);
  rdatacrc<=datacrci;rcnt<=(others=>'0');
    error0<='0';rt<='1';
 elsif (rt='1' and rcnt<7) then datafini<='0';rcnt<=rcnt+1;
 rcrcvar:=rdtemp(11 downto 6) xor multi_coef;
 if rdtemp(11)='1' then
  rdtemp<=rcrcvar(4 downto 0)&rdtemp(5 downto 0)&'0';
 else rdtemp<=rdtemp(10 downto 0)&'0';
 end if;
  elsif (rt='1' and rcnt=7) then datafini<='1';
     rdata<=rdatacrc(16 downto 5);rt<='0';
     if(rdatacrc(4 downto 0)/=rdtemp(11 downto 7) then
         error0<='1';end if;
  end if;
end if;
end process;
end comm;