usblnk.c

DALLAS 1 Wire 总线 SDK 支持多种高级语言

//---------------------------------------------------------------------------
// Copyright (C) 2001 Matthew Dharm, All Rights Reserved.
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the "Software"),
// to deal in the Software without restriction, including without limitation
// the rights to use, copy, modify, merge, publish, distribute, sublicense,
// and/or sell copies of the Software, and to permit persons to whom the
// Software is furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included
// in all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
// MERCHANTABILITY,  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
// IN NO EVENT SHALL DALLAS SEMICONDUCTOR BE LIABLE FOR ANY CLAIM, DAMAGES
// OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
// ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
// OTHER DEALINGS IN THE SOFTWARE.
//
// Matthew is not activily supporting this code but can be reached at:
// mailto:[e-mail]
//---------------------------------------------------------------------------
//
//  usb_drv.c - General 1-Wire link layer for the DS2490 on Linux 
//
//  Version: 3.00B
// 

#include "ownet.h"
#include "usb.h"
#include <errno.h>

#define CONTROL_CMD	0x00
#define COMM_CMD	0x01
#define MODE_CMD	0x02
#define TEST_CMD	0x03

#define MOD_SPEED_CHANGE_EN	0x0001
#define MOD_1WIRE_SPEED		0x0002

#define TIMEOUT_VALUE	5000

/* the structure we'll use to access other devices */
extern struct usb_dev_handle *usb_dev_handle_list[MAX_PORTNUM];

// exportable link-level functions
SMALLINT owTouchReset(int);
SMALLINT owTouchBit(int,SMALLINT);
SMALLINT owTouchByte(int,SMALLINT);
SMALLINT owWriteByte(int,SMALLINT);
SMALLINT owReadByte(int);
SMALLINT owSpeed(int,SMALLINT);
SMALLINT owLevel(int,SMALLINT);
SMALLINT owProgramPulse(int);
void msDelay(int);
long msGettick(void);
SMALLINT hasPowerDelivery(int);
SMALLINT hasOverDrive(int);
SMALLINT hasProgramPulse(int);
SMALLINT owWriteBytePower(int,SMALLINT);
SMALLINT owReadBitPower(int, SMALLINT);

//--------------------------------------------------------------------------
// Reset all of the devices on the 1-Wire Net and return the result.
//
// 'portnum'    - number 0 to MAX_PORTNUM-1.  This number is provided to
//                indicate the symbolic port number.
//
// Returns: TRUE(1):  presense pulse(s) detected, device(s) reset
//          FALSE(0): no presense pulses detected
//
int owTouchReset(int portnum)
{
	int result; 
	unsigned char buffer[0x20];

	/* issue the 1-wire reset */
	result = usb_control_msg(usb_dev_handle_list[portnum], 0x40,
			COMM_CMD, 0x0043, 0x0000, NULL, 0x0, TIMEOUT_VALUE);
	//printf("result is %d\n", result);

	/* repeat until the unit is not idle */
	do {
		/* get the status */
		result = usb_bulk_read(usb_dev_handle_list[portnum], 0x81,
				buffer, 0x20, TIMEOUT_VALUE);
		//printf("result is %d\n", result);

		//for (result = 0; result < 0x20; result++) {
		//	printf("%02X: %02X\n", result, buffer[result]);
		//}
	} while (!(buffer[0x08] & 0x20) && !(result < 0));

	if (result < 0)
		return FALSE;

	if (buffer[0x10] & 0x01) {
		return FALSE;
	} else {
		return TRUE;
	}
}

//--------------------------------------------------------------------------
// Send 1 bit of communication to the 1-Wire Net and return the
// result 1 bit read from the 1-Wire Net.  The parameter 'sendbit'
// least significant bit is used and the least significant bit
// of the result is the return bit.
//
// 'portnum'    - number 0 to MAX_PORTNUM-1.  This number is provided to
//                indicate the symbolic port number.
// 'sendbit'    - the least significant bit is the bit to send
//
// Returns: 0:   0 bit read from sendbit
//          1:   1 bit read from sendbit
//
int owTouchBit(int portnum, SMALLINT sendbit)
{
	int result; 
	unsigned char retval;
	unsigned char buffer[0x20];

	/* issue the bit i/o command */
	result = usb_control_msg(usb_dev_handle_list[portnum], 0x40,
			COMM_CMD, 0x0021 | (sendbit << 3), 0x0000, NULL, 0x0, TIMEOUT_VALUE);
	//printf("result is %d\n", result);

	/* repeat until the unit is not idle */
	do {
		/* get the status */
		result = usb_bulk_read(usb_dev_handle_list[portnum], 0x81,
				buffer, 0x20, TIMEOUT_VALUE);
		//printf("result is %d\n", result);

		//for (result = 0; result < 0x20; result++) {
		//	printf("%02X: %02X\n", result, buffer[result]);
		//}
	} while (!(buffer[0x08] & 0x20) && !(result < 0));

	/* get the data */
	result = usb_bulk_read(usb_dev_handle_list[portnum], 0x83,
			&retval, 0x1, 1000);
	if (result == -1) {
		printf ("owTouchBit: clearing halt\n");
		usb_clear_halt(usb_dev_handle_list[portnum], 0x83);
	}


	/* return the data */
	return retval;
}

//--------------------------------------------------------------------------
// Send 8 bits of communication to the 1-Wire Net and return the
// result 8 bits read from the 1-Wire Net.  The parameter 'sendbyte'
// least significant 8 bits are used and the least significant 8 bits
// of the result is the return byte.
//
// 'portnum'    - number 0 to MAX_PORTNUM-1.  This number is provided to
//                indicate the symbolic port number.
// 'sendbyte'   - 8 bits to send (least significant byte)
//
// Returns:  8 bytes read from sendbyte
//
int owTouchByte(int portnum, SMALLINT sendbyte)
{
	int result; 
	unsigned char retval;
	unsigned char buffer[0x20];

	/* issue the byte i/o command */
	result = usb_control_msg(usb_dev_handle_list[portnum], 0x40,
			COMM_CMD, 0x0053, 0x0000 | sendbyte, NULL, 0x0, TIMEOUT_VALUE);
	//printf("result is %d\n", result);

	/* repeat until the unit is not idle */
	do {
		/* get the status */
		result = usb_bulk_read(usb_dev_handle_list[portnum], 0x81,
				buffer, 0x20, TIMEOUT_VALUE);
		//printf("result is %d\n", result);

		//for (result = 0; result < 0x20; result++) {
		//	printf("%02X: %02X\n", result, buffer[result]);
		//}
	} while (!(buffer[0x08] & 0x20) && !(result < 0));

	/* get the data */
	result = usb_bulk_read(usb_dev_handle_list[portnum], 0x83,
			&retval, 0x1, 1000);
	if (result == -1) {
		printf ("owTouchByte: clearing halt\n");
		usb_clear_halt(usb_dev_handle_list[portnum], 0x83);
	}

	/* return the data */
	return retval;
}

//--------------------------------------------------------------------------
// Send 8 bits of communication to the 1-Wire Net and verify that the
// 8 bits read from the 1-Wire Net is the same (write operation).  
// The parameter 'sendbyte' least significant 8 bits are used.
//
// 'portnum'    - number 0 to MAX_PORTNUM-1.  This number is provided to
//                indicate the symbolic port number.
// 'sendbyte'   - 8 bits to send (least significant byte)
//
// Returns:  TRUE: bytes written and echo was the same
//           FALSE: echo was not the same 
//
int owWriteByte(int portnum, SMALLINT sendbyte)
{
   return (owTouchByte(portnum,sendbyte) == sendbyte) ? TRUE : FALSE;
}

//--------------------------------------------------------------------------
// Send 8 bits of read communication to the 1-Wire Net and and return the
// result 8 bits read from the 1-Wire Net.   
//
// 'portnum'    - number 0 to MAX_PORTNUM-1.  This number is provided to
//                indicate the symbolic port number.
//
// Returns:  8 bytes read from 1-Wire Net
//
int owReadByte(int portnum)
{
   return owTouchByte(portnum,0xFF);
}

//--------------------------------------------------------------------------
// Set the 1-Wire Net communucation speed.  
//
// 'portnum'    - number 0 to MAX_PORTNUM-1.  This number is provided to
//                indicate the symbolic port number.
// 'new_speed'  - new speed defined as
//                MODE_NORMAL     0x00
//                MODE_OVERDRIVE  0x01
//
// Returns:  current 1-Wire Net speed 
//
int owSpeed(int portnum, SMALLINT new_speed)
{
	int result; 
	unsigned char retval;
	unsigned char buffer[0x20];

	/* issue the command to enable speed changes */
	result = usb_control_msg(usb_dev_handle_list[portnum], 0x40,
			MODE_CMD, MOD_SPEED_CHANGE_EN, 0x0001, NULL, 0x0, TIMEOUT_VALUE);
	//printf("result is %d\n", result);

	/* repeat until the unit is not idle */
	do {
		/* get the status */
		result = usb_bulk_read(usb_dev_handle_list[portnum], 0x81,
				buffer, 0x20, TIMEOUT_VALUE);
		//printf("result is %d\n", result);

		//for (result = 0; result < 0x20; result++) {
		//	printf("%02X: %02X\n", result, buffer[result]);
		//}
	} while (!(buffer[0x08] & 0x20) && !(result < 0));

	/* issue the command to change the speed */
	result = usb_control_msg(usb_dev_handle_list[portnum], 0x40,
			MODE_CMD, MOD_1WIRE_SPEED, new_speed ? 0x0002 : 0x0000, NULL, 0x0, TIMEOUT_VALUE);
	//printf("result is %d\n", result);

	/* repeat until the unit is not idle */
	do {
		/* get the status */
		result = usb_bulk_read(usb_dev_handle_list[portnum], 0x81,
				buffer, 0x20, TIMEOUT_VALUE);
		//printf("result is %d\n", result);

		//for (result = 0; result < 0x20; result++) {
		//	printf("%02X: %02X\n", result, buffer[result]);
		//}
	} while (!(buffer[0x08] & 0x20) && !(result < 0));

	/* return the data */
	return new_speed;
}

//--------------------------------------------------------------------------
// Set the 1-Wire Net line level.  The values for NewLevel are
// as follows:
//
// 'portnum'    - number 0 to MAX_PORTNUM-1.  This number is provided to
//                indicate the symbolic port number.
// 'new_level'  - new level defined as
//                MODE_NORMAL     0x00
//                MODE_STRONG5    0x02
//                MODE_PROGRAM    0x04
//                MODE_BREAK      0x08 
//
// Returns:  current 1-Wire Net level  
//
int owLevel(int portnum, SMALLINT new_level)
{
   // Adapter supports it but not implemented yet
	return 0;
}

//--------------------------------------------------------------------------
// This procedure creates a fixed 480 microseconds 12 volt pulse 
// on the 1-Wire Net for programming EPROM iButtons.
//
// 'portnum'    - number 0 to MAX_PORTNUM-1.  This number is provided to
//                indicate the symbolic port number.
//
// Returns:  TRUE  successful
//           FALSE program voltage not available  
//
int owProgramPulse(int portnum)
{
   // Adapter supports it but not implemented yet
   return 0;
}

//--------------------------------------------------------------------------
//  Description:
//     Delay for at least 'len' ms
// 
void msDelay(int len)
{
   struct timespec s;              // Set aside memory space on the stack

   s.tv_sec = len / 1000;
   s.tv_nsec = (len - (s.tv_sec * 1000)) * 1000000;
   nanosleep(&s, NULL);
}

//--------------------------------------------------------------------------
// Get the current millisecond tick count.  Does not have to represent
// an actual time, it just needs to be an incrementing timer.
//
long msGettick(void)
{
   struct timezone tmzone;
   struct timeval  tmval;
   long ms;

   gettimeofday(&tmval,&tmzone);
   ms = (tmval.tv_sec & 0xFFFF) * 1000 + tmval.tv_usec / 1000;
   return ms;
}

//--------------------------------------------------------------------------
// Send 8 bits of communication to the 1-Wire Net and verify that the
// 8 bits read from the 1-Wire Net is the same (write operation).  
// The parameter 'sendbyte' least significant 8 bits are used.  After the
// 8 bits are sent change the level of the 1-Wire net.
//
// 'portnum'  - number 0 to MAX_PORTNUM-1.  This number was provided to
//              OpenCOM to indicate the port number.
// 'sendbyte' - 8 bits to send (least significant byte)
//
// Returns:  TRUE: bytes written and echo was the same
//           FALSE: echo was not the same 
//
SMALLINT owWriteBytePower(int portnum, SMALLINT sendbyte)
{
   // replace if platform has better implementation (faster response)
   if (!hasPowerDelivery(portnum))
      return FALSE;
   
   if(owTouchByte(portnum,sendbyte) != sendbyte)
      return FALSE;

   if(owLevel(portnum,MODE_STRONG5) != MODE_STRONG5)
      return FALSE;

   return TRUE;
}

//--------------------------------------------------------------------------
// Send 1 bit of communication to the 1-Wire Net and verify that the
// response matches the 'applyPowerResponse' bit and apply power delivery
// to the 1-Wire net.  Note that some implementations may apply the power
// first and then turn it off if the response is incorrect.
//
// 'portnum'  - number 0 to MAX_PORTNUM-1.  This number was provided to
//              OpenCOM to indicate the port number.
// 'applyPowerResponse' - 1 bit response to check, if correct then start
//                        power delivery 
//
// Returns:  TRUE: bit written and response correct, strong pullup now on
//           FALSE: response incorrect
//
SMALLINT owReadBitPower(int portnum, SMALLINT applyPowerResponse)
{
   // replace if platform has better implementation (faster response)
   if (!hasPowerDelivery(portnum))
      return FALSE;

   if(owTouchBit(portnum,0x01) != applyPowerResponse)
      return FALSE;

   if(owLevel(portnum,MODE_STRONG5) != MODE_STRONG5)
      return FALSE;

   return TRUE;
}

//--------------------------------------------------------------------------
// This procedure indicates wether the adapter can deliver power.
//
// 'portnum'  - number 0 to MAX_PORTNUM-1.  This number was provided to
//              OpenCOM to indicate the port number.
//
// Returns:  TRUE  if adapter is capable of delivering power. 
//
SMALLINT hasPowerDelivery(int portnum)
{
   // Adapter supports it but not implemented yet
   return FALSE;
}

//--------------------------------------------------------------------------
// This procedure indicates wether the adapter can deliver power.
//
// 'portnum'  - number 0 to MAX_PORTNUM-1.  This number was provided to
//              OpenCOM to indicate the port number.
//
// Returns:  TRUE  if adapter is capable of over drive. 
//
SMALLINT hasOverDrive(int portnum)
{
   return TRUE;
}

//--------------------------------------------------------------------------
// This procedure creates a fixed 480 microseconds 12 volt pulse 
// on the 1-Wire Net for programming EPROM iButtons.
//
// 'portnum'  - number 0 to MAX_PORTNUM-1.  This number was provided to
//              OpenCOM to indicate the port number.
//
// Returns:  TRUE  program volatage available
//           FALSE program voltage not available  
SMALLINT hasProgramPulse(int portnum)
{
   // Adapter supports it but not implemented yet
   return FALSE;
}